Soil erosion load estimation is one of the key issues in soil erosion research.
土壤侵蚀量估算是土壤侵蚀研究中的关键问题之一。
It provides the veracity basis for the electric power system short-term on load estimation.
电力系统负荷预测可分为长期、中期和短期负荷预测。
The results indicate that the heat losing by the heat bridge is important and can not be ignored in the air condition load estimation.
结果表明，车身的骨架结构引起的热桥传热造成的局部附加热损失较大，对车室内的空调负荷影响不能忽略。
It makes a comparison between the SCV and packet number prediction effect of real traffic load of NLANR and the effect on the total traffic load estimation.
通过分析数据源nlanr给出的真实网络流量数据，比较SCV和分组数的预测效果，以及对网络流量估计的影响。
In this paper multi - input and multi - output optimized inverse system load estimation method is applied to study multi - load identification by experiment.
本文应用多输入-多输出优化逆系统方法进行了多载荷识别试验研究。
A method of load estimation for multi service CDMA systems is proposed in this paper. With this method, uplink and downlink loads are estimated, and load thresholds are then determined.
提出了多业务CD MA系统的一种负荷估计方法，按照该方法对系统上、下行链路的负荷分别进行估计，并确定相应的负荷门限。
According to the marketplace project, this paper briefly describes the electrical design points in the electrical load estimation, the power supply system, lighting system and air conditioning system.
结合商场工程项目，简要阐述建筑电气设计中，负荷估算、供配电系统、照明系统以及空调系统设计要点。
However, there are two factors that will affect the estimation of the hardware requirement to support average load on the web tier.
然而，要在web层支持平均负载，也有两个因素将影响硬件需求的评估。
Its functions include: network topology, state estimation, bus load forecast and state monitor etc.
该软件具有：网络结线分析、状态估计、母线负荷预测和网络状态监视等功能。
The accuracy of the rotor speed estimation in speed sensorless vector control system of induction motor under load is sensitive to parameter errors of the internal machine model.
在感应电动机无速传感器矢量控制系统中，在负载条件下转子速度估计的精确度对电机内部模型参数误差非常敏感。
Incorporating the power load modelling for Northeastern District, the selection of load model, the method of parameter estimation and field tests, etc. are expounded.
结合东北地区负荷建模工作，在负荷模型的选择、参数估计方法以及现场试验等几方面进行了阐述。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
Based on the branch-current-based current method, this paper presented a three-phase state estimation method for Distribution where the load current is considered as the state variable.
在基于支路电流的三相配电网状态估计的基础上提出了以负荷电流为状态变量的配电网的三相状态估计方法。
The detectors in one example measure switch voltages and the estimation circuit estimates power delivered to the load according to a switch voltage and impedance between two nodes of the switch.
在一个实例中，所述检测器测量开关电压，以及所述估计电路根据开关电压和该开关的两个节点之间的阻抗来估计输送到负载的功率。
The relation between load and displacement is deduced by approximately differential equation of flexural curve and the error resulted from this estimation is given out.
应用挠曲线近似微分方程，推导了线切割结构的载荷与位移关系，并给出了由于微分近似导致的误差。
The new features increase the complexity and computation load of motion estimation greatly in H. 264 encoder.
然而这些新技术的使用大大增加了H . 264编码器运动估计的复杂度和计算负载。
Then the principles of hierarchical estimation and feed forward compensation are applied to derive the power system state estimation and load frequency control equations.
然后，应用分层估计和前馈补偿原理导出电力系统状态估计和负荷频率控制方程。
The test for local strength of welded joints is necessary for strength design and load capacity estimation of the welded joints.
工程上进行焊接接头强度设计或承载能力评定时，需要测定焊接接头各区域的局部强度。
Its estimation range is large, about of the symbol rate, while the algorithm proposed requires a very low computational load and is very easy to implement with digital hardware.
可估计的载波频差范围是大的，约为符号率的，并且算法所需的计算负载非常低，适合数字硬件实现。
This method provides a closed-form solution and reduces the computational load of DOA estimation.
并且该算法可以得到闭式解，有效地降低了DOA估计的运算量。
The tests focus on computational load and accuracy of the state estimation.
测试比较的测重点是计算量和估计精确度。
Storm runoff pollution has broad impacts and it is difficult to monitor, control and treat. So the quantitative estimation of pollution load is a key step for its control and management.
暴雨径流污染具有影响面广，监测、控制和处理困难而复杂的特点，其负荷定量化是进行治理与控制的重要基础与中心环节。
In a static load experiment, such a method can be used to make estimation in the case that exerted final load can is not up to ultimate bearing capacity.
在静载荷试验中，由于种种原因终止荷载未达到极限荷载时，可用上述方法进行推测。
The study shows that it is feasible to apply ECCS Recommendation Method to the evaluation and estimation of the fatigue strength of the load carrying parts on welded bogies.
研究表明，ECCS规范方法用于车辆焊接转向架承载构件的疲劳强度评估是可行的。
The motion estimation method could greatly reduce computational load while maintaining motion estimation precision.
这种运动估计方法在保证估计精度的前提下，显著地减少了运动估计需要的计算量。
The motion estimation method could greatly reduce computational load while maintaining motion estimation precision.
这种运动估计方法在保证估计精度的前提下，显著地减少了运动估计需要的计算量。
应用推荐