The finite element method, instead of the usual Arch-Beam Load Distribution method, is applied to the structural analysis in the shape optimization of arch-dam.
采用有限元方法，而不是通常的拱梁负荷分配方法，适用于坝拱的形状优化的结构分析。
The basic principle of load distribution method is that the equations of distribution coefficients of loads are set up according to the compatibility conditions of deformation at nodals.
荷载分配法的基本原理是根据节点的变形谐调条件列荷载分配系数方程。
The stress characteristic of the interface, deformation rule under the action of load and the stress distribution rule were discussed by adopting the experimental research method.
采用实验研究的方法，探讨锚固体界面力学特征、在荷载作用下变形规律以及界面上的应力分布规律。
The structure and load form of the absorbing tower is complex and regular design and calculation method cannot give its distribution condition of the stress and deformation.
脱硫吸收塔结构及荷载形式复杂，常规设计计算方法不能给出其应力和变形分布情况。
Based on the rolling feature and practice of reversible cold mill, a new calculating method to determine the load distribution is put forward by means of nonlinear equations.
根据可逆冷轧机的生产特点，采用一种通过直接求解非线性方程组来确定负荷分配的方法。
The irregular distribution of the wave load along the erect riser makes the computation of equivalent wave nodal force difficult when applying Finite Element Method to analyze risers strength.
波浪荷载沿垂直立管的分布是不规则的，这对工程中用有限元法分析立管强度进行等效波浪结点力的计算带来困难。
Investigating several methods for load forecast of distribution network, space and time forecast are united example indicates that this method is feasible.
研究了配电网负荷预测的几种方法，采用空间与时间相结合的负荷预测方法，算例应用表明该算法切实可行。
The practice showed that this method was simply practical and overcome the variance of load distribution.
实践证明，该方法简单易行，解决了控制系统中负荷分配不均的问题。
The lever method is used to calculate the load transverse distribution in the section of support point.
在支点截面的荷载横向分布计算中，一般采用杠杆法。
Considering the effects of space behavior and load distribution on the bent, a practical method for calculating the effective length of the bent columns is proposed.
考虑厂房空间作用和排架荷载分布的影响，对排架柱的计算长度提出了实用计算方法。
The paper studies load distribution status on shearer cutting drum while it works, puts forward load calculation method used for strength verification of parts of mining machine.
研究了采煤机滚筒截煤时所受的载荷分布情况，提出了用于煤机零部件强度校核的载荷计算方法。
Load distribution of axial fan along to the blade and blade height is put forward according to dynamic design method of quintic equation.
提出了轴流通风机沿叶片叶高的载荷分布，按五次方流型设计的方法。
A specific method of real time load optimized distribution in power plant is presented upon SIS platform.
提出了在SIS平台上开发火力发电厂实时负荷优化分配系统的具体方案。
The results show that the method is able to response the wind load spatial distribution characteristics of the transmission tower.
计算结果表明，该方法能较好反应风荷载空间分布特性，是对高频天平测力实验局限性的一种可靠方便的扩展。
The load distribution and balancing method of twin motor drive with A. C. woundedrotor induction motors are analyzed in this Paper.
本文分析了交流绕组式异步电动机在双机驱动时负荷的分配及平衡措施。
The voltage loss in different manner of load distribution on the electric power line was calculated by the mathematic method in this paper.
本文运用数学方法对沿线路各分布方式下的电压损耗进行了推导。
Based on the rolling feature and practice of reversible cold mill, a new calculating method to determine the load distribution is put forward by means of nonlinear equations.
根据可逆冷轧机的生产特点，采用了一种简单的迭代方法求解负荷按比例分配构成的非线性方程组，得到总轧制道次数以及各个道次的中间厚度。
Based on the branch-current-based current method, this paper presented a three-phase state estimation method for Distribution where the load current is considered as the state variable.
在基于支路电流的三相配电网状态估计的基础上提出了以负荷电流为状态变量的配电网的三相状态估计方法。
Stress distribution at cross section of transverse uniformly distributed load and non-uniformly distributed load applied to concrete cylinder by finite element method is analyzed.
采用有限元的方法计算分析了混凝土圆柱体在受横向均匀线荷载和非均匀线荷载时其横截面上的应力状况。
The method reasonably considers the influence of frequency change caused by generator outage on load flow distribution.
该方法合理地考虑了因发电机开断而频率变化对潮流分布的影响。
In this paper, the theory research and project practice advances of load distribution involved the constraints, goal and method of optimization are described.
本文从负荷分配的约束条件、优化目标及优化方法等方面论述了目前国内外理论研究及工程实践的进展。
Compared with the existing methods, the proposed method could obtain more reasonable results which could decrease pile group effect and render a distribution of pile head load agreeable to the fact.
与现有的方法相比，该方法能够取得较好的结果，即使群桩之间被夸大的效应减小了，桩顶荷载的分布更趋于实际工况。
At present, the existing method for calculating coefficients of transverse distribution of load is only appropriate for single span Bridges, and cannot calculate multi-girder Bridges.
针对传统的钢筋混凝土刚架拱桥采用拱索体系加固的要点和措施，提出了计算拱索体系荷载横向分布的弹性支承连续梁法。
Based on the comprehensive load model considering the distribution network as the research object, by digital simulation method, and the load model for an in-depth study of the simulation.
本文以考虑配电网络综合负荷模型作为研究对象，采用数字仿真方法，对该负荷模型进行了较为深入的仿真研究。
The paper discusses the calculation method for conductor load distribution, tension and sag after installation of phase to phase spacers on compact type transmission lines.
文章探讨了紧凑型线路安装相间间隔棒后的导线荷载分配量、导线张力、弛度的计算方法。
This paper proposes a novel spatial load forecasting (SLF) method for distribution planning.
文章提出了一种新颖的配电网空间负荷预测模型。
The three-phase analysis method should be applied for the distribution calculation of electrical traction load in the electrical system.
电力牵引负荷在电力系统中的分布计算宜采用三相分析法。
This paper analyzes lateral connection method of bridge, confirms widening and reforming method for simple supported beam (slab) bridge via calculating lateral load distribution coefficient.
分析桥梁横向连接方式，通过荷载横向分布系数的计算，确定简支梁板桥改造加宽形式。
Locomotive spring adjustment is mainly to assure uniform distribution of axle load of locomotive as an important method.
机车调簧是保证机车轴重分配均匀的重要手段。
The three-dimensional photoelasticity method is used to analyze the stress distribution in the bevel gear under torsional moment and centrifugal load.
本文用三维光弹性法分析锥齿轮在扭矩和离心载荷下的应力分布。
应用推荐