64-bit switch load library: Copy /opt/IBM/mqsi/6.0/sample/xatm/db2swit64 to /var/mqm/exits64/db2swit (This command also renames the file to remove the 64 when installed to exits64.)
位交换加载库；将 /opt/IBM/mqsi/6.0/sample/xatm/db2swit64复制到 /var/mqm/exits64/db2swit（此命令还将重命名文件，以在安装到 exits64时删除 64）。
You needs to make sure that the relevant switch-load file is built and placed in a proper path for the transaction manager to load along with the application program.
需要确保构建相关开关加载文件，并将其放置在适当的路径，以便事务管理器将其与应用程序一起加载。
While traders and investors have little more information than that, the switch to a basket could be giving China reason to load up on non-dollar assets.
转向盯住一篮子货币将使中国有理由购入非美元资产，交易员和投资者知道的信息仅此而已。
Down at the bottom of the screen when reading an app, you have options to mark as read, load in the browser, and switch from text mode to full HTML rendering mode.
当你在阅读的时候，在屏幕的底部有标记为读过，在浏览器打开，或者由文本模式转到HTML模式等选项。
The switch-load file could be provided by either the transaction manager or the resource manager, and can optionally provide code to handle the errors returned by the XA routines.
开关加载文件由事务管理器或资源管理器提供，并且有选择地提供代码以处理xa例程返回的错误。
If DB2 is not installed in the default location, you must build the switch load files from the source provided in mq.
如果DB 2未安装在缺省位置，必须从MQ中提供的源代码构建交换加载文件。
Experiments and simulations show that the proposed system can operate in audio switch frequency range without audio noise from the motor load, meanwhile, EMI can be limited to low level.
实验与仿真结果表明：该系统采用音频开关而不导致电机负载的音频噪声，同时使EMI能被限制在低电平。
32-bit switch load library; Copy /opt/IBM/mqsi/6.0/sample/xatm/db2swit to /var/mqm/exits/db2swit.
位交换加载库；将 /opt/IBM/mqsi/6.0/sample/xatm/db2swit 复制到 /var/mqm/exits/db2swit。
The switch structure is called infx_xa_switch and the switch-load file needs to be modified accordingly.
开关结构的名称为infx_xa_switch，并且需要相应地修改开关加载文件。
A sample make file to build the switch-load file to use in this case could look like.
构建在本案例中使用的开关加载文件的示例制做文件类似于。
A switch-load file called $MQ_HOME/lib/amqzsc is supplied with WebSphere MQ.
称为 $MQ_HOME/lib/amqzsc 的开关加载文件随WebSphereMQ 一起提供。
Using the proposed switch control strategy to track the references, load voltage and current are compensated.
利用上述的开关策略进行跟踪，达到对负载电压和电流补偿的目的。
The actual load is compared to four limit values, and by achieving the limit value, the relay of the crane controller could be switch.
实际的装载量靠近极限值的同时，又不断与四个极限值相比较。起重机控制电容可以作为开关。
Exerciser transfer Selector Switch: Permits selection of exercise with and without load transfer.
操作器转换选择开关：有及无负荷转移的条件下都可以选择操作。
Switch-Position Pilot Lights: Indicate source to which load is connected.
开关位置指示灯：显示负荷连接至哪一种源。
You can alter your bootsector code to load your file, switch to protected mode and jump to your kernel image (if you have enough room for the code in your bootsector!
您可以改变您的引导区，用来加载您的文件，切换进保护模式，然后再跳入您的内核映像（如果您的引导扇区有足够的空间来放置这些代码的话！）
Transformer substation including each kind of equipment: transformer, circuit breaker, load switch, generatrix, current transformer, voltage transformer and so on.
变电站包括各类设备：变压器、断路器、负荷开关、母线、电流互感器、电压互感器等。
And installed the overload protection, namely to ensure that motor and pump load pressure switch.
并安装了超载保护，即保证电机及油泵负荷的压力开关。
Taking a sensor of switch - output type NPN for example, its structural characteristic of the load driving unit and the driving pattern is introduced in this paper.
本文以三线制npn式开关量输出型传感器为例，介绍了传感器的负载驱动单元的结构特点及驱动方式。
This paper introduces the automatic control circuit time in turn driven by inverter with the using and the reserved load and combined switch connection.
介绍变频器驱动一用一备负载的自动定时轮换控制电路及组合开关联接。
Mating corresponding vacuum load switch is for electric power, metallurgy, mine, chemical controlling and protecting, it is suitable for location that has bad load and frequent operation.
配套相应的真空负荷开关可用于电力、金、山、工等部门的配电系统作控制和保护、别适合投切恶性负载和需频繁操作的场所。
This paper introduces a new vacuum load - breaking switch with main and auxiliary circuit, which is of lower current chopping level, higher transferring current.
介绍了一种新型带有主、辅电路的真空负荷开关，它具有低截流、高转移电流。
U1B is a Schmitt trigger that compares the battery voltage to the same stable reference of the other section, but for another purpose: it controls the load switch Q3.
U 1 B的是一个施密特触发器，电池电压比较稳定的其他部分相同的参考，但另一个目的：它控制的负荷开关q3。
The detectors in one example measure switch voltages and the estimation circuit estimates power delivered to the load according to a switch voltage and impedance between two nodes of the switch.
在一个实例中，所述检测器测量开关电压，以及所述估计电路根据开关电压和该开关的两个节点之间的阻抗来估计输送到负载的功率。
Before reliability calculation with the network flow method, the affective area of tie switch is knew through computation of the AC load flow.
在实现思路上，先通过交流潮流确定联络开关的切换范围，再用前述的网流法计算系统可靠性。
The utility model belongs to a handcart, particularly belonging to pneumatic load switch handcart.
本实用新型属于手车，尤其属于压气式负荷开关手车。
Please do not fall when opened or closed, for it belong to low load switch, Feared that causes the Damages of inside.
开关请注意不要掉落，属于低负荷量专用开关，恐造成内部机构的破损。
The vacuum load switch unit is fixedly sealed and isolated by adopting epoxy resin.
真空负荷开关单元采用环氧树脂固封绝缘。
The vacuum load switch unit is fixedly sealed and isolated by adopting epoxy resin.
真空负荷开关单元采用环氧树脂固封绝缘。
应用推荐