The method and procedures of establishing load-deflection model by using ANSYS software are described.
使用该模型可进行矫直行程的计算，解决了有限元方法在自动矫直机上的应用问题。
Stability problems of latticed shells are thoroughly studied by load-deflection complete process analysis.
通过荷载-位移全过程分析对各种形式网壳结构的稳定性能进行了深入研究。
Numerical examples give the macroscopic load-deflection curves and the stress-strain curves of typical soft tissues.
数值例题给出了典型生物软组织的宏观载荷-位移曲线和应力应变曲线。
Taking a heliostat as example, the paper applies thin plate flexure theory and study regularity of load-deflection curve for reflector plate.
建立了直角坐标系有限变形非线性弹性力学的倒易定理并给出了大挠度弯曲薄板的倒易定理。
This paper analyzes the load-deflection and stress characteristics of the ring-wave spring in theory, and obtaines several calculating formulas.
对环状波形阀簧的变形特性和应力状态进行了理论分析，得到了一系列设计计算式；
This paper deals with the load-deflection and load displacement curves of beams basedon the fatigue experiments of plated and unplated RC beams.
本文通过钢筋混凝土芯梁及粘贴钢板补强混凝土复合梁的疲劳试验，研究了它们在疲劳试验过程中载荷和加载线位移及跨中挠度的变化规律。
Through the load-deflection curves analysis of the reinforcement beams, this article also derived a short-term stiffness formula for calculating.
通过对加固梁荷载—跨中挠度曲线的分析，推导出了加固梁的短期刚度计算公式。
It was also found that at a fixed temperature the transverse-rupture strength of the alloy generally increased with the steepness of load-deflection curves.
还表明，在一定温度下，载荷-挠度曲线越陡，合金的抗弯强度一般也越高。
The abnormal deformation or local damage of steel structure can be reflected by the load-deflection curve and the deflection curve of the longitudinal axis.
钢结构的异常变形或局部损坏可通过荷载—挠度曲线以及纵轴线的挠度曲线反映出来。
Based on result of lateral actions test, gives load-deflection curves for infilled frames. Influence of aspect ratio on response of infilled frames is analyzed.
通过水平加载的墙板单元试验，得到了墙板单元在水平荷载作用下的荷载—侧移曲线，分析了试件高宽比对墙板单元受力性能的影响。
It is very necessary and important to trace the complete load-deflection paths in order to know comprehensively the characteristics of structures subjected to loads.
对结构进行平衡路径的跟踪分析，是全面了解该结构的受力性能所必须进行的一项工作。
In the testing of the flexile modulus of PVC-U profiles, the load-deflection trace varied with the shapes of the samples, an inflection appeared when using irregular samples.
在对PV C - U型材弹性模量试验中发现，同一样品的规则样条与不规则样条的弯曲弹性模量相差较大。
The load-deflection characteristics of anchoring section of prestressed cable, lateral resistance distribution as well as axial load distribution of anchoring section are studied.
并将岩体剪切损伤理论与常规剪切位移法相结合，研究了拉力型预应力锚索锚固段的荷载-位移特性、侧阻力分布特性以及轴力分布特性等。
Through the analysis of the load-deflection curves of prestressed concrete roof trusses, it is shown that these trusses deflect a considerable amount in the state of ultimate strength.
本文通过对预应力混凝土屋架的荷载-挠度曲线分析，说明预应力混凝土屋架在强度极限状态时，屋架的挠度是不小的。因此，由屋架的变位引起的上弦次弯矩影响是不可忽略的。
The load-deflection characteristics of inclined excavated foundations of transmission lines in homogeneous soil under lateral loads are analyzed using a 3-D numerical simulation model.
通过数值模拟，分析输电线路倾斜掏挖式基础在水平荷载作用下的荷载挠度特性。
The ultimate load values, characteristics of failure and load-deflection relationships show good agreement between the finite element and experimental results obtained by other researchers.
由有限元计算所得的极限荷载、破坏特征以及荷载变形关系与试验结果比较接近。
Through the load-deflection curves of SFRC, the effects of fiber kinds and fiber content on the first-crack strength and the flexural toughness of SFRC were contrasted with those of concrete.
借助弯曲荷载-挠度全曲线，分析了纤维掺量和类型对韧性指数和初裂荷载的影响。结果表明，钢纤维混凝土的抗弯初裂强度、极限强度和弯曲韧性均随纤维掺量的增大而提高。
For the reinforcing soil, the soil and reinforcing materials interaction and the load-deflection relationship of the reinforcing materials can be described very well by using finite-element method.
对于加筋土，应用有限元法可以有效地分析土与加筋材料间的相互作用及加筋材料本身的应力应变关系。
The emphasis of the analysis is put on the effects of the angle of inclination of the concentrated force upon the deformed shape, the load-deflection relationship and the length of the plastic region.
着重讨论了集中力的倾角对弯曲形状、载荷—挠度关系及塑性区长度的影响。
Design a variety of radial clearance and the contact Angle, to meet different application requirements of load and deflection.
设计有多种径向游隙和接触角，满足不同的应用负荷和偏斜要求。
Using nonlinear finite element method, the compression load deflection of the seal was analyzed and cross sectional shape of the seal was optimized.
利用非线性有限元法分析了密封条的压缩受力变形特性，根据结构力学原理对密封条横截面形状进行了优化。
The temperature at which a thermoplastic can be operated under load can be defined qualitatively by the heat deflection temperature.
热塑性塑料带载运行温度可从质量上定义为热偏差温度。
In test system of reinforced concrete double cantilever beams, strain, deflection and load were principal experimental contents.
在钢筋混凝土双悬臂梁试验系统中，应变、挠度以及荷载是其主要的测试内容。
Because of axis line deflection and asymmetric load distribution of rotary kiln, the support parts may break, spall, or erode due to the induced overlarge contact stresses.
回转窑运行中由于轴线偏差，支承载荷分配严重不均，导致支承部件因接触应力过大而产生压溃、剥落和点蚀等现象。
Put the material in a known test hole on the aperture, and then through a small aperture will load imposed on the fabric, for reads deflection scale pointer value.
将待测材料夹在已知孔径的测试孔上，然后通过较小孔径将一定负荷施加于织物上，于刻度指针上读取挠曲度值。
For this status, this paper proposes a new load ratio deflection method for making monthly trade schedule of directly dispatched thermal power generation units.
针对此现状，提出了一种负荷率偏差法，用于解决直调火力发电单元月度电能交易计划编制问题。
Axis line deflection and asymmetric load distribution of the rotary kiln induce the cracking of supporting shaft frequently.
回转窑运行中由于轴线偏移，支承载荷分配不均导致托轮轴疲劳断裂。
Axis line deflection and asymmetric load distribution of the rotary kiln induce the cracking of supporting shaft frequently.
回转窑运行中由于轴线偏移，支承载荷分配不均导致托轮轴疲劳断裂。
应用推荐