Nikon is also reversing its losses in lithography.
另外,尼康光刻机业务也开始扭亏为盈。
The lithography systems maker also said it sees strong and continuous structural demand” for its products.
阿斯麦公司还表示,旗下产品的需求会出现持续的强势增长。
It will also use copper interconnects, low-k, strain silicon and other features. Like 32-nm, Intel will make use of 193-nm immersion lithography.
这款产品将使用Intel第三代HKMG工艺,第五代硅应变技术,另外与32nm类似,22nm制程仍将继续使用193nm液浸式光刻技术。
He believes this would be easier to carry out than the lithography currently used to manufacture SQUIDs because it would require no photosensitive mask and no chemicals to wash away that mask.
他相信,制造SQUID时,这项技术的应用比现代的印刷集成电路技术要容易,因为它不需要有光敏涂层,也不再需要化学物质洗去涂层。
The tool is reportedly being used for the development of Intel Corp.’s 22-nm logic node. With a different tool, Nikon was the sole lithography vendor for the critical layers at Intel’s 32-nm node.
据报道Intel正在使用这款光刻机开发其22nm节点制程逻辑芯片产品.目前尼康是Intel32nm制程芯片关键层制造用光刻设备的独家供应商。
The arts include calligraphy and lithography.
平面造型艺术包括书法和平版印刷术。
The graphic arts include calligraphy and lithography.
平面造型艺术包括书法和平版印刷术。
All these make a great improvement to quantum lithography.
因而是对量子光刻术的一个很大改进。
The sensor is fabricated by traditional lithography and etching.
制作采用的是传统的光刻、刻蚀工艺。
The electron beam lithography and its improvement are introduced also.
同时还介绍了电子束光刻技术及其改进。
The proximity effect in the E-beam lithography system was verified by experiments.
利用电子束曝光机完成有关邻近效应的实验。
The high speed Patten Generator is designed for nanometer E-beam lithography system.
为满足纳米级电子束曝光系统的要求,设计了高速图形发生器。
Electron - beam lithography with a novel multilevel resist structure defines the pattern.
采用新型的多层抗蚀剂结构的电子束光刻来形成图形。
The PMMA mold with a microstructure was fabricated using synchronous radiation lithography.
首先利用同步辐射曝光,制作出带有微结构的PMMA模具。
Individual sodium titanate nanowire-based device is fabricated via e-beam lithography techniques.
利用电子束光刻技术制作了基于钛酸钠纳米线的纳米器件。
Experimental results of deep submicron lithography with a excimer laser are reported in this paper.
报道用远紫外准分子激光进行亚微米光刻的实验结果。
We study the factors which affect electron-beam micro lithography, combining with our practical work.
结合实际工作,分析、探讨了影响电子束曝光机加工微细化的因素。
The design and fabrication of high aspect-ratio hard X-ray zone plates by X-ray lithography are studied.
对利用X射线光刻制作大高宽比硬x射线波带片的设计和制作工艺进行了研究。
Electron beam lithography machine is the key instrument for mask making and research of nanometer device.
电子束曝光技术是掩模版制作和纳米器件研究的主要手段。
The results of electronic microscope scanning of sub-micrometer patterns by far ultraviolet lithography are given.
并给出远紫外光刻亚微米级图形的电镜扫描照片结果。
The optical lithography correction techniques become key technologies in the IC designing and manufacturing of VDSM.
光刻校正技术已成为超深亚微米下集成电路设计和制造中关键的技术。
Mask fabrication is a key technique of scattering with angular limitation projection electron-beam lithography (SCALPEL).
掩模制作是电子束散射角限制投影光刻(SCALPEL)的关键技术。
A process of soft lithography was introduced for fabrication of PDMS (polydimethylsiloxane) micro-mixer on micro-fluidic chip.
介绍了一种用软光刻技术制作微流芯片上PDMS微混合器的工艺。
The principle and control algorithm of temperature compensation for Sub Micron projection lithography objectives are introduced.
主要介绍一种光刻机投影物镜温度补偿控制的原理及控制算法。
This article mainly explains the process of LIGA technology, which includes X-ray mask lithography, Micro-electroforming and Micro-copy.
本文主要阐述了LIGA技术的工艺过程,包括X射线深层光刻、微电铸和微复制工艺。
In synchrotron radiation X-Ray lithography, distortion of mask is caused by its initial tension, stress and inhomogeneous thermal effect.
在同步辐射X射线光刻中,由于掩模的初始张应力和掩膜的非均匀受热将使掩模产生热畸变。
Next, a mixture of two polymers is added to the metal substrate to create patterns, a process known as diblock copolymer lithography (BCP).
接下来,在金属基板上添加一种由两种聚合物组成的混合物来制作样品,这个工艺过程被称为嵌段共聚物光刻(BCP)。
A large number of lithographic medical books came out within about 100 years after the introduction of lithography technique from the west.
石印术传入我国后的百余年间,出版了大量的石印本医籍,现存的约一千余种,其中近五百种医籍得益于石印本存世。
The lithography technique to fabricate the curved microlens array on the curved substrate by using laser direct writing system was also given.
文中给出了用激光直写设备在曲面基底上进行光刻来制作曲面微透镜阵列的方法。
The process of SU-8 photoresist lithography is researched, and the influence of steps like coating and soft-bake on the lithography is studied.
初步研究了SU-8胶的光刻工艺流程,讨论了涂胶、前烘等各个步骤对光刻结果的影响。
应用推荐