A dedicated liquid-cooling circuit maintains the pack's temperature to within 2 degrees.
专用的液冷循环系统将电池组的温度变化维持在2度的范围内。
The barrel liquid-cooling technology is widely used in ground-based air-defense and anti-missile small-caliber automatic gun and ship-borne medium or small caliber guns.
身管液冷技术在陆基防空反导小口径自动炮和舰载中、小口径火炮中被广泛采用，研究身管液冷状态下的温度分布对于火炮发射安全性和武器效能具有重要意义。
The technician attempts to produce better cooling in personal computers by stirring up the liquid with tiny jets to make sure maximum heat exchange.
这位技术人员试图用微型喷嘴搅拌液体，以确保最大的热量交换，从而为个人电脑提供更好的冷却效果。
Did you know that liquid cooling is 90 percent more efficient than air cooling?
您知道吗？液体制冷的效率比气体制冷高90%。
Liquid cooling does not need many heavy fans to drive heat away from the LED source, resulting in less disturbing control room noise.
液体冷却不需要笨重的风扇为LED光源散热，从而降低了扰人的控制室噪音。
Liquid Zinc is not compatible with cooling pipe.
锌液与冷却管是不相容的。
The innermost layers provide liquid cooling and ventilation.
最里面的那层提供液体冷却和透气。
According to some embodiments, systems for low cost liquid cooling may be provided.
根据一些实施例可以提供用于低成本液体冷却的系统。
Barco introduces liquid cooling to video walls, doubling the lifetime of the LEDs.
巴可为视频墙引入了主动液体冷却，使LED寿命增加一倍。
Industrial liquid conveying: cooling and air conditioning systems, boiler feed and condensate systems, machine matching, acid and alkali.
工业液体输送：冷却和空调系统、锅炉给水和冷凝系统、机床配套、酸和碱。
Induced reflux is liquid formed within a fractionation tower by condensation of vapors by means of an internal cooling coil.
内回流是分馏塔内借助内部冷却盘管使蒸气冷凝而产生的液体。
Objective To explore the cooling effects of intravenous drip of hypothermal liquid on the patients with burn and high fever.
目的探讨静脉滴注低温液体对烧伤高热患者的降温效果。
The water pump, driven by a belt from the engine crankshaft, circulates the cooling liquid between the radiator and engine water jackets.
水泵由发动机曲轴上的皮带驱动，使冷却液在散热器与发动机水套之间循环流动。
Based on the analysis, the heat sink materials, cooling liquid, the heatsink structure, and the bonding of laser bar are optimized in order to increase the transfer efficiency.
通过分析，对微通道热沉材料、冷却液、微通道热沉的结构参数以及热沉与激光器列阵条的封装等进行了优化设计。
Heat transfer possibly results in the thermal wrinkling of transpiration cooling platelet of the liquid rocket engine (LRE) 's thrust chamber.
液体火箭发动机发汗冷却推力室的结构层板可能出现受热皱损。
The transformer oil is an important liquid dielectric material in the transformer; it plays the roles of insulation, cooling and extinction of arc.
变压器油是变压器内部重要的液体绝缘介质，起绝缘、冷却和消弧的作用。
High pressure gas refrigerants in the condenser cooling medium heat to be setting for liquid, through the throttle device reduced pressure cooling into the evaporator;
高压气态制冷剂在冷凝器中向冷却介质放热被凝结为液态后，经节流装置减压降温进入蒸发器；
Conclusion the intravenous drip of hypothermal liquid is effective and safe for the patients of burn and high fever. It is the preferred cooling method for these patients.
结论静脉滴注低温液体对烧伤高热患者有效、安全，是烧伤高热首选的降温方法。
From the aspect of heat dissipation, the liquid directly applied in cooling the electronic devices in the form of jet impingement has its unique advantages.
从热耗散的角度来看，将液体以射流冲击的形式直接应用于电子器件的冷却，有其独特的优点。
This thesis designs the liquid dehumidifying and cooling system, especially studying on the exploitation and rebirth for liquid desiccant.
本文对液体除湿降温系统进行了设计，并着重对液体除湿剂的利用及再生技术作了研究。
A dry washer cooling device used for dry washer distillation, drying and recovery consists of a refrigerator, a cooling liquid tank and a pump.
一种用于干洗机蒸馏和烘干回收的干洗机冷却装置。由制冷器、冷却液箱和泵组成。
In continuous casting course, the liquid core length is a very important parameter, it reflects the cooling condition of casting and the appropriate degree of pulling speed.
在连铸生产工艺中，连铸坯的液芯长度是连铸生产中一个非常重要的参数，它直接反映了铸坯冷却的状况和拉速的合理程度。
Typical applications are liquid cooling and liquid heating, vapour condensing, gas cooling and gas droplet separation.
典型的应用是液体冷却和液体加热，蒸汽冷凝，气体冷却和气体液滴分离。
Liquid cooling was always considered as the most effective cooling way.
液体冷却一直被认为最有效的冷却方法。
An introduction was made to volumetric changes of castings and dimension changes of mold cavity occurring during liquid cooling and solidification of nodular iron castings.
介绍球铁冷却、凝固过程中的体积变化以及型腔尺寸变化。
Microencapsulated Phase Change Material (MEPCM) suspension liquid is a coolant with high heat capacity, which can enhance considerably liquid cooling performance.
相变材料微胶囊（MEPCM）悬浮液是一种高热容冷却介质，其应用可大幅提高高功率设备液体冷却性能。
The included coolant can only be used with Thermaltake liquid cooling systems. Do not use for any other purposes.
此冷却液仅能使用于曜越的水冷系统中，请不要使用于其它目的。
A novel contact cooling method suitable for the vitrified cryopreservation of skin is proposed and comparison is made with the cooling method using liquid nitrogen.
提出一种适用于皮肤低温保存的快速冷却方法，并与目前使用的快速冷却方法进行了比较。
How does the liquid cooling system work?
液体散热系统的工作原理？
How does the liquid cooling system work?
液体散热系统的工作原理？
应用推荐