The linkage design of the operating attachment of this machine is described in this article.
本文介绍了装运车工作装置的连杆机构设计。
While mainly focus on mechanical structures and linkage design, also involving hydraulic system design and problem solving.
工作重点是机械结构设计，包括液压系统的设计。
To meet these challenges, information technologies must be smarter, beginning at the design of data intake processes and throughout record storage and linkage.
为了满足这些挑战，在数据接收处理、数据记录存储和数据连锁设计之初，信息技术必须变得更加聪明。
With the developments of computer techniques and calculation techniques, optimization method is one of main approaches to design linkage.
随着计算机技术和现代计算技术的迅猛发展，优化方法成为机构分析和设计的主要手段之一。
One kind of stepping motor control card based on ISA bus of PC which achieved multi-spindle linkage control is introduced, its principle and design of hardware construction and software are discussed.
介绍了一种基于PC机的IS A总线步进电机控制卡，实现多轴联动控制，讨论了其工作原理和硬件结构设计、软件设计。
The fire control laboratory was introduced briefly, the design of fire automatic alarm system and fire linkage control system were expounded.
介绍了消防实验室的概况，详细阐述了火灾自动报警系统、消防联动控制系统的设计。
Through practical design of the underground store, constitution of fire automatic warning system and implementation of linkage control are introduced.
通过一个地下市场的设计实例介绍了人防工程火灾自动报警系统的组成和联动控制的实施。
The multi-base linkage type of intelligence diagnosis design was employed to realize the intelligence diagnosis of river health and the decision-making of rehabilitation measures.
采用多库联动式智能诊断设计，实现了河流健康的智能诊断与康复措施的决策生成。
The ant colony algorithm was used to carry on optimization design of four-bar mechanism for food machinery, analyzing and building the geometric relation between the linkage.
采用蚁群算法对食品机械四杆机构进行最优化设计，分析建立杆尺寸间的几何联系，并结合具体实例确定四杆机构各个参数。
Conclusion Case-sibling control design might avoid population stratification by using siblings as controls thus might be used to test association and linkage between genes and disease.
结论病例同胞对照设计使用患者同胞作为对照，避免了人群分层现象，可以用来检测基因与疾病之间的关联或连锁。
The dimensional synthesis of linkage mechanisms is the main content of linkage mechanism design.
连杆机构尺度综合是连杆机构设计的主要内容。
Mainly described the selection of detectors and fire linkage, the design of the automatic fire alarm system is been presented.
主要通过对探测器的选型、消防联动控制方面的阐述，介绍了火灾自动报警系统在实际中的设计及应用。
An optimization approach for minimizing the kinematics error magnification from the linkage variation to the end-effector position is studied based on the graphical design method.
基于此方法，提出了一种优化途径，用以最小化由连杆长度误差至末端执行器运动学位置误差之间的误差放大倍率。
In this paper, the kinematic analyses and optimization design for elliptic gear-linkage rapier driving mechanism in rapier loom were made.
本文分析了剑杆织机椭圆齿轮——连杆引纬机构的运动规律，并对该机构进行了优化设计。
Based on the above analysis, the kinematical analysis and optimization design of multi-linkage of press operating mechanism are studied in this paper.
采用复合形法对多连杆机构进行了优化设计，并对拉延压力机工作机构的机构优化参数进行了计算。
In the paper the authors introduce the design methods of interactive software for analysis of motion and dynamics in plane linkage.
介绍了平面机构运动分析和力分析交互式软件的设计思想、设计功能与设计方法。
The various formed circular point curves and centre curves are also drawn up with the help of the computer, it is easy to design and optimize the planar linkage accurately.
通过计算机还可绘制出各种形状的圆点曲线及圆心曲线，便于对平面连杆机构进行精确的设计和优化。
The design of the arm system includes structural parameters design of linkage and structural design of all components.
本文以某型号井下装载机工作装置为例，对其连杆机构的结构参数进行优化设计。
The method improved the design quality of piston linkage mechanism, prolonged the service life of the product, it has an important role.
该方法对于进步活塞连杆机构白勺设计质量，延长产品使用寿命，具有重要白勺作用。
Optimization of two geared-linkage mechanism design is discussed. Mathematical model and calculating example are given.
本文阐述了两种齿轮连杆机构的优化设计，给出了最优化数学模型和算例。
In this paper, an analytic method to design the plane four-bar linkage mechanism according to three predetermined locations of framed link is introduced.
利用转化机架法，将按预定连架杆构件位置的四杆机构设计问题，转化为按预定连杆位置设计四杆机构问题。
Design of four-bar linkage is emphasis and difficulty of hydraulic support.
四连杆机构的设计是液压支架设计的重点和难点。
The four-bar linkage, as a typical moving mechanism, is widely used in various kinds of mechanical driving mechanism design.
四连杆机构作为典型运动机构广泛运用于各类机械传动设计。
Taking the Y-CH minicar as an exam- plee, the optimum design method of the independent Ackerman steering linkage is finally introduced.
并以Y-CH 型汽车为例，介绍了断开式转向梯形机构优化设计的方法。
This paper develops a CAD system of CAM design for this CAM linkage by using integrated analysis and synthesis in mechanism.
本文采用集成凸轮设计与机构分析为一体的方法，实现并开发了这类凸轮机构凸轮设计的CAD系统。
The paper aims at the problems of steering linkage with transition pitman arm of a bus, uses system dynamics software ADAMS to check and find out the problems, and then improves the design.
针对某款客车带有转向中间臂的转向杆系出现的问题，利用系统动力学分析软件ADAMS进行分析，找出问题并进行设计改进。
Several simplified design procedures for such spatial four-bar linkage are given in this article.
文中按这个设想提供了这种空间四杆机构的某些设计方法。
The optimal design of a six-bar linkage to be used in the main driving mechanism of a gear planer is discussed and treated as a multi-objective problem.
本文首先讨论了在插齿机主传动机构中使用的六杆机构的优化设计问题，并建立了一个多目标数学模型。
By applying the principle of mechanism combination in series, the design of the cam-linkage mechanism combination is completed and the main sizes of the mechanism are given.
应用串联式机构组合原理设计凸轮—连杆机构组合系统，并确定其主要参数。
By applying the principle of mechanism combination in series, the design of the cam-linkage mechanism combination is completed and the main sizes of the mechanism are given.
应用串联式机构组合原理设计凸轮—连杆机构组合系统，并确定其主要参数。
应用推荐