Linear and circular interpolation are often hard-wired into the control unit.
直线和圆弧插补往往很难连接到控制单元。
To meet the need of big screening area of shale shaker, a kind of trimotor ellipse vibrating shale shaker based on synthesizing of linear and circular motion is presented.
为了满足大筛面面积钻井振动筛的需要，介绍了一种基于直线运动和圆运动合成原理的三电机椭圆钻井振动筛。
The interaction between an ultra-short ultra-intense laser pulse and a solid target with a low density pre-plasma is examined. Both linear and circular polarizations of the laser are considered.
对线极化、圆极化的超短超强激光脉冲与靶前有一段低密度预等离子体的固体靶的相互作用进行了理论和粒子模拟研究。
WebSphere MQ provides two types of logging which are known as circular and linear.
WebSphereMQ提供两种日志记录类型，分别为循环方式和线性方式。
Gold mine distribute at the edge of circular structure and intersection of circular and linear structure.
金矿常分布在环形构造边缘或产在环形构造与线形构造的交会处。
The main research work of the paper is that in this, several adaptive algorithms are analyzed and the characteristic of adaptive linear arrays and circular arrays is discussed.
本文主要研究的工作是，分析各种自适应算法，讨论自适应线阵和圆阵的特性。
This paper presents a new method for designing a dual-frequency patch antenna with circular and linear polarizations.
提出了一种同时具有圆极化和线极化的双频新型开槽微带天线的设计方法。
A new filter in which both circular and linear birefringence are utilized is proposed and theoretically analyzed.
利用圆双折射和线双折射材料设计了一种滤色器，并对它的透射特征进行了理论分析。
Exhaustive discussion about the measurement of the optical values, namely, rotating Angle, inclination Angle and compensation Angle, under illuminating the model by linear or circular polarized light.
详细讨论如何利用线偏振光或圆偏振光来测量光学数值：旋转角、倾斜角和补偿角。
Therefore it is clearly shown that reflected light is linear polarized light just on the condition of total reflection or glancing incidence and circular polarized light may emerge in other cases.
结果表明，只有在刚刚发生全反射或掠入射时，反射光才是线偏振光，在其它情况下可能出现圆偏振光。
The results of computer simulation show that Bayesian high-resolution method has better performance than other methods in both uniform linear array and circular array.
本文研究了利用贝叶斯高分辨方法解决相干源的问题，分别对均匀线列阵和圆形阵中的相干源问题进行了计算机仿真，并将贝叶斯方法和其它方法进行比较。
Gantry structures, Y axis use simultaneous dual motor and drive, X, Y, Z axis with circular rail (formula type linear guide can be chose), steady transmission, high precision.
龙门式结构，Y轴采用同步双电机双驱动，X、Y、Z三轴采用圆导轨（可选配方型直线导轨），传动平稳，运行。
Non-DSLR digital cameras in general do not use beamsplitters, and, as a result, can use both (ie, linear or circular).
单反数码相机一般非不使用分光镜，和，因此，可以同时使用(即，线性或圆形)。
Non-circle curve is one of familiar outlines, but most numerical control machine tools only have linear interpolation and circular interpolation.
非圆曲线轮廓是机械零件常见的轮廓要素之一，绝大多数数控机床只具备直线插补和圆弧插补功能。
Accordingly, Chinese circular thought pattern and Western linear thought pattern lead to the difference of Chinese inductive discourse and English deductive discourse.
与之相适应，中国的圆式思维方式和西方的线型思维导致英汉语篇上呈现演绎式和归纳式的区别。
Firstly, based on linear matrix inequalities (LMIs), a sufficient and necessary condition of circular regional controller possessing integrity for descriptor linear systems is given.
首先，用线性矩阵不等式(LMI)给出了线性广义系统圆盘区域的控制器存在的充分条件。
Three thinking mode counterparts are studied in this thesis: synthesis thinking vs. analysis thinking, circular thinking vs. linear thinking and concrete thinking vs. abstract thinking.
本文分析了三对不同的中英思维模式，分别是：综合思维和分析思维，环形思维和直线思维，具象思维和抽象思维。
To enhance expandable ability of expandable screen shell, a circular bellow shell is designed and its expandable ability is analyzed by non-linear FEA method.
为提高保护外壳的膨胀性能，提出了圆形波纹管形式外壳的设想，并采用非线性有限元方法分析了其膨胀性能。
Some fixed point theory of fractional linear transformation is discussed and it is shown that one kind of transformation from unit circular to unit circular has only some real fixed points.
本文讨论了分式线性变换不动点理论，并证明了一类单位圆到单位圆的分式线性变换仅有实不动点。
Using normal elements and circular permutations, this dissertation gives the method of the construction of linear codes with the best parameters;
本文利用有限域中的正规元和循环排列，给出了一类有限域上具有优的参数的线性分组码的构造方法；
The MHD equilibrium solutions of a toroidal plasma with non-circular cross-section and linear current distribution are written in terms of a fast convergent series.
用一个收敛很快的级数构造了非圆截面、线性电流分布环形等离子体的磁流体平衡解。
The geological significance of linear structures and genetic types of circular structures are dis-cussed.
讨论了线性构造反映的地质意义和环型构造成因类型。
Combining the characteristics of circular motion, elliptical motion, and the reciprocating linear motion. Large capacity, small energy consumption and the screening efficiency is high.
综合了圆运动、椭圆运动、和往复直线运动的特点，产量大，能耗小，筛分效率高。
The influence of depth of grinding, feed rate and circular linear speed of the grinding wheel on the grinding forces with respect to the maximum chip thickness of a single active diamond was analyzed.
从单颗金刚石最大切削厚度的角度，分析了磨削深度、进给速度和砂轮线速度对磨削力的影响。
In this paper the directional characteristics of elliptic array antennas is studied and the fact that a linear array and a circular array is the especial cases of an elliptic array was proved.
对椭圆形阵列天线的方向特性进行了研究，证明了直线阵和圆环阵是椭圆形阵的特例。
Then, focused on off-line interpolation calculation and the speed planning, the linear interpolation, circular interpolation, extended line interpolation and spline interpolation are discussed.
首先分析了离线轨迹规划的思路和策略，然后重点讨论了构成轨迹规划的两大核心技术：离线插补计算和速度规划。
The research focused on the coordinated control between the general CNC module and the linear servo system used for the non-circular section turning.
采用多中断系统来实现两种不同的伺服控制——直线伺服控制和位置伺服控制的时序协调，以完成非圆截面的自动车削；
The research focused on the coordinated control between the general CNC module and the linear servo system used for the non-circular section turning.
采用多中断系统来实现两种不同的伺服控制——直线伺服控制和位置伺服控制的时序协调，以完成非圆截面的自动车削；
应用推荐