In the past few decades, research of laser materials has been mainly focused on inorganic materials.
在过去的几十年中，对激光材料的研究多集中在无机材料方面。
Yaotai Laser Materials Co. , Ltd. located in No. 6988, Da Ye Road, Jinhui Town, Fengxian District, Shanghai.
海耀泰镭射材料有限公司座落于上海市奉贤区金汇镇泰日大叶公路6988号。
New laser materials have been explored continuously due to the long growth time and high cost of the crystals.
由于激光晶体的生长周期长、成本高等缺点，激励人们不断地探索新的激光材料。
This research has led to be helpful in preparing new anti-laser materials applicable to multiple wavelength, high optical density and having high transmittance.
研究结果对多波段、高光密度、高透过率新一代激光防护材料的制备具有重要意义。
The authors point out that the primary characteristics of coming generation LRF's are eye safety, higher efficiency and beam quality, newer laser materials, function modularization.
对人眼安全、提高效率、改进光束质量、采用新的激光材料及功能模块结构将是新一代军用激光测距机的主要考虑因素。
It is a very pivotal factor for the DPSSL to search for laser materials that are suitable for LD pumping, therefore, the upsurge for exploring new laser crystal materials is rising.
寻求适合LD泵浦的激光工作物质是提高DPSSL效率的一个关键的因素，为此，兴起了一场探索新型激光晶体的热潮。
China has the richest resource of rare-earth, so the rare-earth doped luminescent materials play an important role in the national research on luminescent materials and laser materials.
我国是世界稀土资源最丰富的国家，因此在当今的发光材料和激光材料的研究和实际应用中，稀土发光和激光材料占最重要地位。
Solid ink machines need about one-third as many parts as laser printers, which require various mechanisms to fuse toner onto paper that must be replaced over time, adding materials and services costs.
固墨打印机所需零部件仅为激光打印机的三分之一，激光打印机需要各种不同的原理来将炭粉融化到纸上，炭粉久了以后必须进行更换，增加了材料与服务成本。
Other uses for this high power diode laser bar are as a direct source for various materials processing applications including cladding, welding, heat treating and brazing.
该高能半导体激光器的其他用途包括，用作各种材料处理应用的激光光源，这些处理应用包括覆层、焊接、热处理和铜焊接。
Laser shock is a new surface technology to modify the surface properties of materials.
激光冲击技术是一种新的材料表面改性新技术。
Laser processing ceramic materials is a new application of laser technology.
陶瓷材料的激光加工是激光技术应用的新领域。
To achieve the compatibility, the conflict demands for infrared and laser stealth materials has to be overcome.
要做到红外和激光的隐身兼容，就必须克服两者对材料的一对矛盾要求。
The phosphate glasses doped with rare earth ions have been widely used in laser mediums and optical filter materials for their outstanding optical and spectrum characteristics.
稀土掺杂磷酸盐玻璃具有优异的光学和光谱特性，在激光介质材料、有色滤光材料等领域中有着重要的应用。
In comparison with ordinary laser processing, the advantages of ultrashort pulse and short wave to all kinds of materials are presented.
对比普通激光加工，超短脉冲和短波长对各种材料的优势作用日趋显现。
The characteristics of the organic semiconducting materials and principle of the first electrically pumped solid state organic laser at the Bell laboratory are outlined.
概述了有机半导体材料产生激光的特性，介绍了贝尔实验室第一个有机固态电注入型激光器的工作原理。
Autogeneous CO2 laser welding were run along the butt between two materials using sets of parameters power and travel speed.
采用不同功率和运转速度参数对两种材料进行了CO2激光对接焊。
The laser engraver can engrave and cut on leather, glass, acrylic, stainless steel and other materials.
激光雕刻师可以雕刻和削减皮革，玻璃，亚克力，不锈钢和其他材料。
The laser processing technology is used to make some special ceramic materials physically or chemically, and meets some special processing conditions for ceramic materials.
它是利用激光技术从物理的或化学的角度制备特殊陶瓷材料和满足陶瓷材料的特殊加工条件。
We achieved a world-class interior by using fine materials and maintaining a laser-attention to details.
我们通过使用优良的材料和维护激光注重细节一个世界级的室内。
Laser shaping technology on hard and brickle inorganic materials is one of the most promising fields.
硬脆性无机材料的激光成形加工是激光加工技术最有前途的领域之一。
The application of laser welding technology in P/M materials and its developing status are systematically introduced.
系统地介绍了激光焊接技术在粉末冶金材料中的应用及其国内外动态。
The (SBA-15) - (DBC-ASA) composite materials have the potential applied value in laser material field.
复合材料（SBA-15）-（DBC-ASA）在激光材料等领域中具有潜在应用价值。
A detection method for obtaining the micro bulk defect size in semiconductive materials by analyzing near infrared laser scattering light distribution is presented.
提出了利用近红外激光散射光强分布分析来检测半导体材料内部微体缺陷的检测方法。
A theoretical model of CO2 laser cutting non-metal materials is built up based on energy balance equation in view of gauss beam distribution.
基于能量平衡方程，考虑高斯光束分布，建立了CO2激光切割高吸收率非金属材料的解析模型。
Study of temperature fields of materials heated by pulse laser by changing various parameters is made.
通过改变多种参数对单脉冲激光加热下材料温度场进行研究。
The theory and experiment techniques about measuring the thermal diffusivity of solid materials by using laser induced transient reflecting grating is introduced.
阐述了用脉冲激光引发瞬态热反射栅的方法来测量固体材料热扩散率的理论、实验装置和实验技术。
Femtosecond laser direct writing in transparent materials and the two-photon photopolymerization technology are used to fabricate the phase-gratings and Dammann grating.
采用飞秒激光透明材料改性和飞秒激光双光子聚合技术制备了位相光栅和达曼光栅等微光学元件。
This paper introduces the applications of the very high power laser in the surface hardening of materials.
本文介绍大功率激光器在材料表面强化中的应用概况。
This paper introduces the applications of the very high power laser in the surface hardening of materials.
本文介绍大功率激光器在材料表面强化中的应用概况。
应用推荐