The results show that the laser coating of functionally gradiant HAp on Ti substrate is good adhesion and biocompatibility.
研究结果表明，羟基磷灰石功能梯度材料的激光涂层具有良好的粘附性，且具有生物相容性。
The surface properties of traditional material could be greatly improved through surface treatment such as laser coating of super fine ceramic powder.
用陶瓷超微粉作熔覆材料，对常规材料进行表面处理，可以极大的提高材料的表面性能。
The process of laser coating of super fine ceramic powder is discussed, and the hardness, roughness and adhesion force to the substrate of the coating are investigated.
介绍了激光熔覆陶瓷粉的工艺过程，并对熔覆层的硬度、粗糙度和熔覆与基底之间的结合情况进行了考察。
The flaws' forming and expanding mechanism had been analyzed and studied, that was happened on the laser coating under repeated impact load by SEM or some other methods.
对激光涂层进行了多次冲击碰撞试验，并通过SEM等手段分析研究了激光涂层在多冲碰撞载荷下的裂纹形成与扩展机理。
The transformation of basal body with laser melted clad coating was studied according to the transmission of elastic stress wave which on a laser coating under repeated impact load.
根据多冲载荷下激光涂层应力波的传播过程研究了涂层全覆盖基体试样在受冲击载荷下的变形情况。
The inner surface of small caliber cylinder packing of ships are applied with strengthening treatment by means of laser coating and surface modification techniques to improve their performances.
采用激光熔覆、表面改性技术对舰船特种小口径缸套的内表面进行强化处理，提高其综合性能。
The fourth, the methods in using immunization, laser and coating material to prevent caries are still being carried out in tests.
第四，关于免疫防龋，激光防龋，使用防龋涂料等，现仍在试验阶段。
The microstructure of the Fe-based clad composite coating reinforced by in-situ particles was investigated, using laser clad FeCSiB powder added with niobium and titanium.
研究了单独添加不同含量的铌与复合添加铌、钛时激光熔覆铁基原位生成颗粒增强复合涂层的组织特点。
The effect of coating on anti corrosion has been studied, which is formed by laser cladding and plasma spurt welding on metal base of anti acid stainless steel.
研究了在耐酸不锈钢基体上采用激光熔覆和等离子喷焊两种工艺形成的涂层对耐腐蚀性的影响。
This paper briefly introduces photothermal techniques and their applications in optical thin film coating measurements and ti: sapphire laser crystal characterisation.
简要介绍了光热技术及其在光学薄膜测量和钛蓝宝石激光晶体表征中的应用。
Back reflection characteristics of laser were researched for the infrared camouflage coating and the microwave absorbing coating.
研究了红外与雷达波隐身涂层的激光后向散射特性。
The Ni based coating on 45 steel has been obtained by laser cladding technology.
采用激光熔覆技术在45钢表面获得镍基合金涂层。
Laser quenching, laser cladding and laser surface alloying, as well as microstructure and properties were presented. The properties and research progress of intelligent coating were reviewed.
介绍了激光淬火，激光熔凝，激光表面合金化等材料表面改性技术及其组织和性能；综述了智能涂层的特点及研究进展。
Laser ablation test shows that the laser irradiation resistance is improved significantly for stainless steel after being deposited by B4C coating.
激光辐照试验表明，在不锈钢表面沉积B4 C涂层，可以明显改善其抗激光辐照性能。
In order to ensure the health of the operator, the inside wall of the laser operating room needs a coating that can absorb laser strongly.
为了确保操作人员的身体健康，激光手术室内墙需要具有对激光强烈吸收的涂层。
The microstructure and wear resistance of Ni based alloy coating on the high temperature alloy GH33 by laser melt casting have been studied.
研究了高温合金GH33表面激光熔铸镍基合金涂层的组织和耐磨性能。
The bioceramic coating by laser cladding has high bonding strength and e.
介绍了在奥氏体不锈钢基材上激光涂覆生物陶瓷涂层的研究结果。
A high temperature anti-sticking effect, the maximum temperature reached 350 degrees Celsius, are widely used in composite coating laser typewriters, copiers and other machinery static.
具有耐高温防粘作用，最高耐高温达350度以上，广泛用于复合涂布激光打字机，静电复印机等机械上。
Good coating materials for absorption of laser in laser heat treatment (LHT) must be of high and steady absorption rate of laser spectrum.
理想的激光热处理吸收涂层必须在高温下具有高而稳定的光谱吸收率。
The mechanism of laser shock peening and application of the coating and limiting layer are studied.
研究激光喷丸的机理及涂层和约束层的应用技术。
The energy absorptivity and hardness of knife surface are obviously increased using graphite coating during laser thermal treatment for high speed steel knife.
采用石墨涂层，对高速钢刀片进行了激光热处理，显著地提高了刀片表面的能量吸收率和硬度。
A new method of monitoring the in-situ extremely low residual reflectivity of antireflection (AR) coating of travelling-wave semiconductor laser amplifier (TW-SLA) is presented.
介绍一种实时监控行波半导体激光放大器(TW - SLA)抗反膜(AR)超低剩余反射率的新方法。
Latest progress and research status of laser cladding ceramic coating was summarized.
综述了激光熔覆稀土陶瓷涂层研究现状及其最新进展。
Conclusion The ceramic coating added by laser is testified in vitro to be a kind of good biocompatible ceramic.
结论激光熔覆钙磷涂层具有较好的体外生物相容性，是一种生物陶瓷涂层。
The window and its coating of the Raman cell are easily damaged by the laser beam with very high power laser.
在高功率激光作用下，拉曼池窗口及其膜层很容易被激光损坏。
The material choosing and coating designing are discussed in this paper. At the same time, several methods for laser reflective film preparation are compared.
分析了高阈值激光反射膜膜层材料的选择及膜系设计，比较了目前制备高阈值激光反射膜的几种常用方法。
Abstract: in this paper, solidification process of laser pool for composite coating system is studied, using numerical technology.
文摘：采用数值模拟技术研究了复合涂层激光熔池凝固过程。
The experimental study of the dielectric coating for deformable mirrors in COIL laser system is reported.
报道COIL激光用变形反射镜的介质反射多层膜实验。
The experimental study of the dielectric coating for deformable mirrors in COIL laser system is reported.
报道COIL激光用变形反射镜的介质反射多层膜实验。
应用推荐