The direct calibration of the light plane in laser-scan measuring based on vision is discussed.
讨论了基于视觉的激光扫描测量中，光平面的直接标定方法。
Research on and development of voice control system used in laser-scan have created a new field for the application of Speech Recognition.
用于激光扫描语音控制系统的研究与开发，为语音识别的应用又开辟了新的领域。
Laser-scan system has virtual view of Stonehenge details.
激光扫描系统可以对巨石阵的细节部分进行扫描成像。
It is equipped with an advanced GPS and laser scan technology for intelligent 3d geometrical navigation.
该车装备有先进GPS和激光扫描技术，用于智能3d几何导航。
The IBM groups have solved this by using a laser to scan back and forth across the glass, preventing the build up of static electricity.
IBM科研小组用激光来回扫描玻璃片解决这个难题，成功防止了静电聚积。
Laser scan imaging and shifting principle, and triangle measuring approach for the transmission flow are described based on the image analysis.
描述了基于图像分析的传输流量检测的激光扫描成像偏移原理和三角测量方法。
In this paper, the principle of a confocal laser scan microscope system and its advantages compared with conventional microscope are introduced.
本文介绍了共聚焦激光扫描显微镜系统的工作原理及其优良性能。
A high precision scanner used in con focal laser scan microscopes is described in the paper.
本文叙述了一种用于共焦激光扫描显微镜的高精度扫描器。
The paper has introduced the theory of measurement and whole constitute of the system including laser scan inspection system and grating displacement closed loop inspection system.
文中介绍了光电二维自动检测仪的测量原理和系统构成，包括激光扫描系统、光栅位移检测闭环控制系统。
This paper introduces the study and experiment of the usage of 3d laser scan technology in spatial information collection of historic building.
本文介绍了三维激光扫描技术应用于历史建筑现状空间信息采集方面的研究和实验。
Finally, 3d laser scan data organization and visualization system is achieved, Verify the efficiency and feasibility of three kinds of indexing methods.
最后，编程实现了三维激光扫描数据组织与可视化系统，验证了三种索引方法的效率及可行性。
According to the feature of SLS, the parameters of interest are layer thickness, hatch spacing, laser power, scan speed, work surroundings temperature, interval time and scanning mode.
根据SLS加工工艺的特点，研究的工艺参数包括：层厚、扫描间距、激光功率、扫描速度、环境温度、层与层之间的加工时间间隔和扫描方式。
The operation principle of tilting mirror scan laser display system, the principal device and critical technology are introduced.
介绍转镜扫描激光显示系统工作原理、主要器件和关键技术。
It was found that increasing laser power or decreasing scan speed leads to higher sintered density and structural homogeneity.
结果表明，适当增加激光功率或减小扫描速率能改善烧结致密度及组织连续性。
High power transverse flow CO2 laser was used to scan the brazing alloy and diamond grits.
采用高功率横流CO2激光扫描钎料合金与金刚石颗粒。
But another machine in the plant, which USES a laser to scan the passing material, can sort plastic by type and colour with great accuracy.
但是工厂里的另一套设备则不一样了。其利用激光对经过的材料进行扫描，按照塑料的种类和颜色进行分类，且准确率极高。
Darkening and refractive index change varied with laser intensity, scan speed and line interval.
暗化程度和折射率改变随激光强度、扫描速度、扫描行间距变化而变化。
With the coming forth and extensive application of the 3d laser scanner in the surveying and mapping field, the processing of massive 3d laser scan data has become one of the nasty solvable problems.
随着三维激光扫描仪的出现及在测绘等领域的广泛应用，对海量三维激光扫描数据的处理已成为的亟待解决的技术难点之一。
Laser is used to sinter the Selective laser sintering (SLS) parts. The scanning system needs to do plenty of scan, so scan method is very important to SLS process.
选择性激光烧结(SLS)技术使用激光束进行截面区域烧结，扫描系统需要作大量的扫描，所以扫描路径的选择就显得尤为重要。
The image reading module uses a laser camera specially designed for barcode reading which can scan several barcodes each time.
终端的图像采集模块采用的是条码采集专用的激光摄像头，可以实现多个条码的一次读取。
Finally, four main factors, laser power, scan speed, beam quality and geometric shape of spot are discussed which can can affect the result of laser solid solution.
最后讨论并分析了影响固溶强化效果的四个主要因素，激光功率、扫描速度、光束质量以及光斑几何形状。
METHODS: By the CNC laser scan system, the wax pattern of full crown was scanned and the 3d shape was retrieved in the computer.
用CNC镭射扫描系统，将全冠的蜡型进行扫描，在计算机中形成全冠的三维图像。
Reverse Engineering can be used to reconstruction the prosthesis. The 3d surface information of the prosthesis can be collected by the laser scan system and there is no blind area.
利用反求工程可以实现修复体的三维重建，激光扫描法可以快速收集修复体的三维表面信息，精度高，并且没有测量盲区。
The technics parameters, such as the laser power, scan velocity, powder feed rate and the Z axis increment, which influence quality and shape were analyzed in this article.
分析了主要工艺参数如：激光功率、扫描速度、送粉量以及Z轴增量对成型质量和形貌的影响。
If we select substrate temperature, laser power and the scan speed properly, we can get good crystallization. It is useful to the fabrication of SOI devices.
适当选择衬底温度、激光功率和扫描速度可望获得良好的结晶，它对SO I器件的制作是有意义的。
In this paper 3-d reconstruction of three kinds of visual microstructures by means of a confocal laser scan microscope system is introduced.
本文介绍利用共聚焦激光扫描显微镜系统进行的三种动物视觉显微结构的三维重建。
In this paper 3-d reconstruction of three kinds of visual microstructures by means of a confocal laser scan microscope system is introduced.
本文介绍利用共聚焦激光扫描显微镜系统进行的三种动物视觉显微结构的三维重建。
应用推荐