The software will be a useful numerical tool for large deformation analyses and nonlinear mechanical design for soft rock engineering at great depth.
该软件系统的问世,可为深部软岩巷道等岩体大变形力学问题提供具有分析和设计功能的数值分析软件系统。
Membrane structure is a kind of space structure which USES structural membrane as the supporting member. It belongs to the system of large deformation structure and has been widely used.
膜结构是以柔性的建筑膜材为主要受力构件的空间结构,属于大变形结构体系,其应用日益广泛。
The tube power spinning forming is a continuous local large deformation process.
筒形件强力旋压是一种连续的局部复杂变形过程。
A new molecular theory of elasticity for TPUE at large deformation was presented.
从而提出了热塑性型聚氨酯弹性体的大形变弹性分子理论。
For the nonlinear equations, a small deformation superposed on large deformation is used.
对于非线性支配方程,采用小变形叠加到大变形上的分析方法。
The nonlinear properties of the materials and large deformation of the structure are included.
分析过程考虑了材料的非线性和结构的大变形特性;
Sponge rubber, which the seal is made up of, is a large deformation nonlinear elastic material.
海绵橡胶是密封条的重要组成部分,是一种可压缩的大变形非线性弹性材料。
This article aims to study large deformation and internal force of elastic truss structure under load.
目的研究解决弹性杆件结构在载荷作用下产生大变形时内力和变形量的精确计算问题。
The effects of geometric large deformation and impact action were taken into account in dynamic analysis.
分析中采用了动力方法,考虑了几何大变形和冲击作用的影响。
Peripheral rock large deformation is a kind of great hazardous geology casualty of underground engineering.
围岩大变形是地下工程中危害极大的一种地质灾害。
In the virtual knee arthroscopic surgery, a real-time large deformation of the knee joint model is required.
在虚拟膝关节手术中,需要对膝关节进行大范围形变的实时模拟。
This large deformation is called for rock dilatancy if volume dilation only occurs owing to stress redistribution.
这种大变形如果仅是应力重分布引起的体积膨胀则称为岩石扩容。
This paper gives the exact relations between strains and displacements for large deformation of elastic thin shells.
本文给出了弹性薄壳大变形时应变与位移之间的精确关系。
The large deformation geometric nonlinear theory is used to study radial stability of transformer low-voltage windings.
采用大位移几何非线性理论,研究了变压器低压绕组的辐向稳定性。
The linearity of a large range extensometer is a critical problem, because its elastic'element is under large deformation.
大量程引伸计的弹性元件处于大变形工作状态,引伸计的非线性矛盾较突出。
The large deformation formulae of filament wound case (FWC) are derived, and the finite element model of the FWC is established.
推导和建立了纤维缠绕壳体大变形有限元公式和有限元模型。
An optimum algorithm is proposed to solve the geometrically nonlinear problem for a simply-supported beam with large deformation.
提出一种求解几何非线性问题的优化算法,并研究了简支梁的几何非线性大变形问题。
In this paper, an edge-cutting AIA method is presented based on elastic-plastic large deformation finite element simulation theory.
针对板材三维冲压成形的切边回弹问题,提出了基于大变形弹塑性有限元数值模拟理论的切边处理AIA方法。
A 16 node shell element with relative degrees of freedom was developed for large deformation analysis of plate and shell structures.
为了简便有效地解决板壳结构的大变形问题,针对16节点相对自由度壳单元进行研究。
The characteristics of extrusion rock tunnel are summarized as large deformation, high deformation speed and long deformation duration.
提出挤压性围岩隧道具有变形量大、变形速率高、变形持续时间长的变形特征。
During the experiment on mechanics of materials, a problem of solid circular shaft in torsion testing for large deformation remains unsolved.
目前在材料力学实验中的圆轴扭转大变形问题尚未解决。
It is difficult to sinter part of crystalline polymer material by SLS for large deformation of crystalline material shrinking in the process.
结晶性聚合物在SLS成形过程中存在较大的收缩变形,工艺较难控制,但此类材料韧性和强度很好,因此其SLS制造有巨大的发展潜力。
About the large deformation description, a multi floating coordinate system is adopted. It can effectively reduce the error of discretization.
对于大变形问题,采用了多浮动坐标系的分段描述,有效地降低了离散化误差,提高了模型的精度。
It can achieve a large deformation, a large range of testing strain-rate and an approximately constant strain-rate dynamic compression testing.
该方案能实现对软材料的大变形、近似恒应变率及大应变率范围动态压缩测试。
Using nonlinear finite element method, the large deformation responses were computed for three plates supported on four edges in different ways.
本文用非线性有限元法计算了三种不同的四边支承板的大变形响应。
The bolting design of large deformation surrounding rock usually depends on experience, one of the main reasons is the bearing capacity of bolts.
大变形围岩的锚杆支护设计一般还是采用经验类比法,主要原因之一是不能合理确定锚杆的承载能力。
Numerical simulation of the fine blanking process for steel which contains elastoplastic large deformation is conducted with the software DEFORM.
精冲数值模拟涉及到大变形等几何非线性问题又有弹塑性变形等材料非线性的问题。
The application of an absolute nodal coordinate (ANC) formulation in the coupling dynamics of flexible beams with large deformation was investigated.
研究了绝对坐标法在大变形柔性梁系统刚-柔耦合动力学问题中的应用。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
用TL法分析研究,建立了二维弹性大变形接触问题的一般实用有限元分析模型。
Comprehensive geological geophysical computations include nonlinear numeric modeling of large deformation and rotating method of limited deformation.
地质-地球物理综合计算法包括非线性大变形数值模拟法及有限变形转动场法等。
应用推荐