Enzymatic kinetics analysis indicated that the inhibition is noncompetitive.
动力学分析表明，其抑制作用为非竞争性。
The segregation mechanism of Bi was approached based on thermo-kinetics analysis.
通过热力学分析，探讨了铋的凝固析出机制。
Then detailed experimental study and chemical kinetics analysis on the ignition control mechanism of ethanol are carried out.
接着对乙醇着火控制机理进行了详细的试验研究和化学动力学分析。
The kinetics analysis of the curing reaction showed that reactive activity of BAPP with epoxy resin is slightly higher than that of DDM.
固化反应动力学分析表明，BAPP与环氧树脂的 反应活性较DDM的 反应活性略高。
The dissertation carried out the reaction kinetics analysis of the sprayed carrier surface, and put forward the photo-catalytic purification rate equation under ideal state.
本文对喷涂载体表面进行了反应动力学分析，提出了系统理想状态下的光净化速率方程。
Kinetics of robot research dynamics problem and inverse problem of two aspects, the need to adopt strict system method for the analysis of robot dynamics.
机器人动力学主要研究动力学正问题和动力学逆问题两个方面，需要采用严密的系统方法来分析机器人动力学特性。
The analysis of transesterification kinetics shows that the transesterification obeys a second-order reaction kinetics model when the transform ratio is under 95%.
动力学分析表明：酯交换反应在转化率为95%之前，符合二级反应动力学模型。
The simulated results, including grain morphologies, kinetics and topological structures etc, are good agreement with the reported experiments and theoretical analysis.
模拟结果得出的晶粒形态、动力学和拓扑学结构特征等与已有的实验结果和理论分析一致。
The roasting kinetics of copper sulfide concentrate is investigated with the differential thermal analysis (DTA), thermo-gravimetry (TG) and X-ray diffraction (XRD).
采用DTA ，TG结合X -射线衍射分析，对硫化铜精矿的焙烧的动力学进行了研究。
The paper describes a study on flocculation kinetics which proceeded on hydraulic characteristic of turbulence, and the analysis of kinetic factors.
根据紊流水力特征研究絮凝动力学问题，分析絮凝动力因素，得出了主要作用力及主导作用力。
Applications of differential scanning calorimetry (DSC) analysis and thermal gravity (TG) analysis in the study on kinetics of annealing transformation of amorphous alloys have been discussed.
论述了示差扫描热分析(dsc)和热重分析(TG)在研究非晶态合金退火转变动力学方面的应用。
The mathematical model of the continuous cooling transformation kinetics was obtained by linear regressive analysis.
用线性回归分析法得到动力学转变的数学模型。
This paper analyzes the kinematics and kinetics characteristics of Fault he 125 through the analysis of balanced section and the geometric reconstruction of Fault He125.
对河125断层进行了几何学再造，利用平衡剖面分析了运动学和动力学特征。
A kinetic equation for combustion of coke fines composed of different grain sizes in sintering is established and an analysis for kinetics was carried out in this paper.
本文建立了烧结用不同粒级焦粉混合燃烧的动力学方程，并进行了相应的动力学实验分析。
Kinetics of hydrothermal reaction in lime-sand system was investigated by means of quantitative phase analysis, SEM observation, and compressive strength measurement.
本文采用定量相分析法测定灰砂系统水热反应的水化物，并通过SEM观察及试块强度测定等研究了灰砂系统水热反应动力学。
The main aspects of the device dynamic character study are the modeling and analysis of the kinematics and kinetics.
运动学和动力学建模和分析是研究机构动态特性的主要方面。
The imidization kinetics of the fluorinated poly(amic-acid) was studied with the whole imidization temperature range using thermal gravity analysis(TG).
采用动态热重法研究了含氟聚酰胺酸在整个亚胺化反应温度范围内的反应动力学。
The oxidation kinetics of the T91 steel under high-temperature air medium was studied by serial weighing method with thermal analysis balance and linear regression method.
用热分析天平连续称重法和线性回归分析对高温空气介质下t 91钢氧化动力学进行研究。
The study on the kinetics of slow-releasing rate of fragrant composite fiber is reported and a quantitative analysis for slow-releasing rate of fragrant fiber is established.
本文报导了对复合芳香纤维逸香速率的动力学研究，并建立了一种定量测定纤维逸香速率的方法。
Reversible and irreversible thermodynamics, kinetics, quantum mechanics, and statistical thermodynamics are the roots of the described thermal analysis.
可逆和不可逆的热力学，动力学，量力学和统计热力学是被描述的热分析的根。
The thermal analysis kinetics of AgGaS2 crystal was studied by differential scanning calorimetry (DSC).
本文利用差示扫描量热法对硫镓银进行了热分析动力学研究。
The effect of products powders on thermal decomposition kinetics of AP was investigated by thermogravimetry (TG) and differential therm analysis (DTA).
采用差热分析法（DTA）和热重法（TG）研究了产物对AP热分解的影响。
By FEM analysis for its intensity, rigidity and kinetics model, it has been optimized, practice shows that it is a successful design.
通过有限元对其进行强度、刚度及动力学模态的分析，并以此进行了优化设计。
The cure kinetics of bismaleimides (BMI) resin system was investigated by dynamic DSC analysis and the phenomenological model was established.
采用全动态dsc研究了双马来酰亚胺树脂(BMI)体系的固化反应动力学，建立了固化动力学的唯象模型。
Methods: After establishing a C6/SD glioma model, by using flow cytometric analysis, immunohistochemistry and HE stain three methods, the proliferation kinetics in C6 glioma cell was measured.
方法：建立C6/SD大鼠胶质瘤模型后，应用流式细胞仪检测、免疫组化、HE染色三种方法，研究C6胶质瘤细胞的增殖动力学指标。
The principles, characteristics and economical analysis of catalytic combustion lor organic waste gases, and also the study progress of catalyst, kinetics and technical process etc were summarized.
对催化燃烧处理有机废气的基本原理、特点及经济性，以及催化剂、动力学和工艺流程等研究进展进行综述。
The kinetics of thermal degradation of PPES and PPESK(1/1) in nitrogen were studied at several heating rates by thermogravimetry analysis (TGA).
利用热失重（TGA）分析仪，氮气氛围中，多重加热扫描速率下的不定温法对PPESK（1/1）及PPES进行热分解动力学研究。
The cure kinetics of a bicomponent high performance epoxy resin was studied by dynamic DSC analysis, and the parameters of the cure reaction were obtained to establish a phenomenological model.
用全动态dsc研究了先进复合材料用高性能双组份环氧树脂的固化反应动力学，获得了固化反应的动力学参数，并建立了固化动力学的唯象模型。
The cure kinetics of a bicomponent high performance epoxy resin was studied by dynamic DSC analysis, and the parameters of the cure reaction were obtained to establish a phenomenological model.
用全动态dsc研究了先进复合材料用高性能双组份环氧树脂的固化反应动力学，获得了固化反应的动力学参数，并建立了固化动力学的唯象模型。
应用推荐