Which is constituted by the auto controlling system of art kettle, pump and joint pipe, PLC and touch screen.
由工艺罐、热水罐、泵及连接管道、PLC和触摸屏组成的自动控制系统组成。
A first joint pipe extending downward from the rotation regulating component and a display mounting component.
法兰件，所述法兰件与上部接合部件联结以便支撑旋转调节部件；
Introduce welded seam specification, standards performed, inspectation items and acceptable index for welding of body and joint pipe.
介绍了阀体与接管焊接的焊缝技术要求、执行标准、检验内容及合格指标。
Through the wire joint pipe should be located in the junction box, the lap joint should be solid, insulating tape wrapping should be uniform and compact.
穿入配管导线的接头应设在接线盒内，接头搭接应牢固，绝缘带包缠应均匀紧密。
This method uses joint pipe and different density between oil and water to separate oil from water. The electrode of auto-dewatering instrument is installed in…
将油水自动脱水仪表电极安装在油水分离罐内，便于安装、维修和推广应用。
The pipe joint comprises a joint pipe and a press cover detachably connected with the joint pipe through screw thread, wherein, a clamp ring base is arranged on the head section of the joint pipe;
管接头，该管接头包括接 头管和压盖，压盖和接头管通过螺纹可拆卸式连接，接头管的端头部设置有卡环座；
When the pipe joint screw, should follow the principle of diagonal twist, not one by one in order to operate, do not screw the screw die, so that the correct installation of rubber gasket.
在拧管道接头螺丝时，应遵循对角互拧的原则，不要逐个顺序进行操作，不要一次性将螺丝拧死，这样才能将橡胶垫片正确地安装上去。
The groundwater level above pipe bottom and anti-infiltration of pipe joint are the decisive factors affecting the groundwater infiltration rate.
管底以上的地下水位和管道接口的防渗施工质量是地下水渗入量大小的决定性因素。
According to the specific circumstances of the project can also take charge of construction directly welded pipe, but must check a stainless steel tube joint can demand reinforcement.
依据工程的详细状况也可以采取主管上直接焊接支管的构造，但必需校核支不锈钢管衔接处能否需求补强。
When you use the wiring laying underground pipe, wire in the pipes should be joint and kink.
布线时要用暗管敷设，导线在管内不应有接头和扭结。
With joint protections of coating and cathode, the buried steel pipeline will still be corroded and penetraded on some pipe surfaces.
埋地钢质管道在防腐层、阴极防腐的共同保护下，钢管的某些区域仍会被腐蚀穿孔。
After being compressor start, just heard to the crude copper pipe of a joint pressure from outdoor, namely with the fastest speed, tighten thick copper pipe joints.
待压缩机启动后，刚听到将室外机粗铜管的接头处有压力冒出，即以最快的速度，拧紧粗铜管的接头。
A method of embedded pipe and outlet box was adopted in the joint grouting system of Wanjiazhaidam.
万家寨水利枢纽大坝接缝灌浆系统采用预埋管路和出浆盒方式。
High quality stainless pipe valve and seamless welded joint can ensure absolutely air conurbation and durability of pipe system.
高品质不锈钢的管道阀门，无缝焊接的连接口，以保证绝对的气体密闭性和管道系统的耐用性。
The long-term safe usage can be kept without expanding joint in the FRP pipe system if rational assemble measures are selected.
在玻璃钢管道系统铺设中选用合理的安装措施，不设置膨胀接头，也能保证管线长期安全使用。
Electro-fusion is widely used in joint of polyethylene pipe, of which quality is very important to piping system.
聚乙烯管连接中大量使用电熔接头，其质量的好坏直接影响管道系统的安全。
Since a bending force is exerted on the pipe during break out, the tool joint connection must be set in the slips as low as possible.
由于卸扣会使钻具产生弯曲力，因此，钻具接头必须尽可能低些坐在卡瓦上。
It adopts outer pipe co - extrude technology, improving the joint stress among layers.
采用的外管共挤技术，提高了管材的层间结合强度。
It adopts outer pipe co-extrude technology, improving the joint stress among layers.
采用的外管共挤技术，提高了管材的层间结合强度。
Avoid install the insulation joint on the vertical pipe.
绝缘接头避免安装在立管上。
The not significant deviation, open seams should be in the middle, or whether cutting pipe end bite flange should be accurate, pressing, after the joint will be neat, close.
插条不能明显偏斜，开口缝应在中间，不管插条还是管端咬口翻边应准确、压紧，以后连接接头才会整齐、贴紧。
It is forbidden to lift pipe within 5 meters closed to the joint after insulation joint is connected to the pipe.
绝缘接头与管线连接后，不许在接头5米内起吊管线。
Not just an added reinforcing ring, this unique pre-compression design compensates for expansion forces generated from normal tapered pipe thread joint make-up.
不仅仅增加了加固环，这种独特的预压缩结构能够抵消常规锥形管道螺纹连接结构所会产生的膨胀力。
The method of stress analysis for pipe with special joints including Y joint and taper - taper joint is indicated through the analysis of vacuum transfer line.
本文通过对减压转油线的应力分析，说明了特殊形状三通管道（包括Y形三通、裤形三通） 的应力分析方法和过程。
Transient liquid phase (TLP) bonding was applied to join TP304H stainless pipe, and the effect of bonding temperature on joint microstructure and mechanical properties was studied.
采用瞬时液相扩散焊(TLP)连接技术进行了TP 304 H不锈钢管的焊接，分析了不同焊接温度对接头组织、成分和力学性能的影响。
Fit the rig tongs with the correct jaws for the drill pipe tool joint or the drill collar. Re-install the safety lock springs.
给大钳装上与钻杆接头或钻铤相匹配的钳头，再装上安全锁簧。
The arranged pipe heater of vertical cylindrical storage oil tank often occurred damage at the joint zone between the distributor pipe and bundle.
立式圆筒形储罐用的排管式加热器，在分配管与管束连接处经常发生损坏。
On the basis of the structure of homemade standard pipe union joint, a new handy union joint, which can be easily reassembled and no special tool applied, is designed.
在国产标准管件活接头结构的基础上，设计了一种拆装方便，不需专用工具，只要用手即可完成拆装任务的新型快速活接头。
On the basis of the structure of homemade standard pipe union joint, a new handy union joint, which can be easily reassembled and no special tool applied, is designed.
在国产标准管件活接头结构的基础上，设计了一种拆装方便，不需专用工具，只要用手即可完成拆装任务的新型快速活接头。
应用推荐