When the script is completed, the computer turns off automatically after having its BMC IP address set using the DOS power-off program you copied to the boot image.
脚本完成时，计算机在设置完BMCIP地址之后，用拷贝到启动镜像的DOS关机程序自动关闭。
Set the IP address of each controller using the serial port at the back of each enclosure.
使用每个封装背面的串行口设置每个控制器的IP地址。
You can also set policies that control access to our SQS queue based on date, time, and source IP Address, as in Listing 2.
您还可以设置一个策略，它根据日期、时间和源ip地址控制SQS队列的访问，如清单2所示。
If you have no hardware power control (no BMC IP address is set), start by flashing the BMC firmware, which enables you to set the IP address at the same time.
如果没有硬件电源控制(没有设置BMCIP地址)，请先从刷新BM c固件开始，使您能够同时设置IP地址。
In this way you know all the computers powered on are either flashing their BMC firmware or waiting for the IP address to be set.
这样，就可以知道所有开着的计算机正在刷新BMC固件，或者等待设置IP地址。
The second and third lines set the IP address of the virtual user.
第二和第三行设置虚拟用户的IP地址。
Set the IP address and physical network card interface ID for the zone created as shown in Figure 7.
为创建的专区设置IP地址和物理网卡接口id，如图7所示。
In the case of explicit binding, checks are performed on the IP address being bound, and the socket options are set accordingly.
对于显式绑定，在绑定的IP地址上执行检查，并相应设置套接字选项。
Includes a rich set of functions to test access control requirements, such as the user's IP address, time and date, or whether the user's name appears in a given list.
包括用于测试访问控制要求的丰富功能集，例如用户的IP地址、时间和日期，或用户的名称是否出现在给定的列表中。
So, you will have to delete both interfaces using the rmdev -dl -r command, re-detect the correct device using CFGMGR, and then set an IP address.
因此，您不得不使用rmdev—dl- r命令删除所有接口，使用cfgmgr重新检测正确的设备，然后设置一个IP地址。
The client system's DNS server value is set as the domain controller address in the TCP/IP Properties window as shown in figure 8.
在图 8所示的TCP/IPProperties窗口中，客户端系统的DNS服务器值被设置为域控制器地址。
If you need to make this SEA available from the VIO Server, use the mktcpip command to set an IP address on it.
如果需要从VIO服务器使用这个SEA，那么使用mktcpip命令在它上面设置ip地址。
This image contains a program called lancfg.exe that allows you to set an IP address on the BMC.
这个镜像包含叫做lancfg . exe的程序，用它可以设置BMC的IP地址。
You can test the network by using ping and specifying the remote IP address you set in the if-up script.
可以通过使用ping并指定if - up脚本中设置的IP地址来测试网络。
If you don't have an IP address, get one assigned and the address of the router. To set it up, run these commands.
如果没有IP地址，就会被分配一个地址以及路由器的地址。
There are those who claim that NAT will solve the shortage at the client side (which hides a set of non-routable addresses behind a signle globally routable IP address) - but even this has limits.
有些人断言NAT（网络地址转换）会解决IP地址在客户端的短缺问题（客户端在单一的全球可路由IP地址后隐藏了一套不可路由的地址），但这其实是很有限的。
In this case, the node assigned as private1 will be set at the IP address 10.0.1.1 and private2 at address 10.0.2.1.
在本例中，指定为private1的节点将被设置为IP地址10.0.1.1,private2被设置为10.0.2.1。
I set the BMC of x01 to have an IP address that resolves to the host x01-bmc. Here I try to access that host remotely.
我把x01的bm c设为拥有解析到主机x01 -bmc的IP地址。
In some environments, you might be able to set up your network so that the images can be moved without changing IP address, host name, and domain.
在某些环境中，您能够对网络进行设置，这样可以在不更改ip地址、主机名和域的情况下移动映像。
So, although you can change the media speed and duplex on the physical interface, you set up the IP address and subnet on the logical interface.
因此，尽管可以在物理接口上修改介质速度和双工模式，但是要在逻辑接口上设置IP地址和子网。
While it would have been possible for me to set up this service from a site with an assigned domain on a static IP address, I felt that a dynamic DNS would offer several security advantages.
虽然我可以用一个静态IP地址在拥有已分配的域的站点中建立这种服务，但是我觉得动态dns应该可以提供一些安全上的好处。
Once you configure the new IP address, set up the routes for the new interface, as shown in Listing 2.
配置了新的IP地址之后，要为新的接口设置路由，如清单2所示。
Sometimes, people will instead authenticate against a set of DNS names, and will thus do a lookup on the IP address before authenticating.
有时，人们会对一组DNS名称而不是IP 地址进行认证，因而要在认证之前查询 IP地址。
Use the command netCfgShow to show the current IP settings of the controller, and use the command netCfgSet to set the desired IP address, subnet mask, and gateway.
使用命令 netCfgShow显示控制器的当前IP地址设置，使用命令netCfgSet 来设置所需连接的 IP 地址、子网掩码和网关。
The database needs a volume vol which is a clone of an existing volume and the WAS needs the IP address of the database to set up its JDBC connection.
数据库需要一个存储卷vol，它是现有存储卷的复制版，并且WAS需要数据库的IP地址来设置JDBC连接。
These variables are set by gvpe, so the command is actually expanded to something like: IP link vpn0 address fe: fd: 80:00:00:01 mtu 1500 up.
这些变量由gvpe设置，因此这条命令实际上将被扩展为下面的类似代码：iplink vpn 0addressfe：fd： 80： 00：00：01mtu 1500up。
Normally a server is not reachable from the Web at large without a static IP address, but a dynamic DNS service allows me to set up a temporary resolvable machine name under another top-level domain.
通常，如果一个服务器没有静态IP地址，那么来自Web上的访问流量就不可能太大，动态dns让我们可以在另外一个顶级域名之上临时建立一个可解析的机器名。
For 'reverse' lookups, that is, when you want to resolve an IP address to a name, you should set up an additional zone.
对于“反向”查找，也就是当您希望将IP地址解析到名称的时候，您应该设置一个附加的区域。
After the router is running again, you'll need to set your computer to obtain an IP address automatically.
后，路由器是运行再次，您需要将您的计算机设置为自动获得IP地址。
After the router is running again, you'll need to set your computer to obtain an IP address automatically.
后，路由器是运行再次，您需要将您的计算机设置为自动获得IP地址。
应用推荐