Experimental results of impact piston show that the inverse design method is valid.
试验结果表明冲击活塞反演设计法是有效的。
From the engineering point of view, a design method for single input optimal regulator with preassigned closed-loop pole by inverse problem approach has been derived.
给出了从逆问题指定闭环极点设计最优调节器的方法，试图从工程角度解决单输入线性定常系统最优调节器的极点配置问题。
In this Paper, decoupling design for non-square multivariable systems using inverse Nyquist array (INA) method is discussed.
本文讨论了用逆奈氏阵列法对一类非方阵多变量系统进行解耦设计。
The design method using inverse kinematics for three dimensional dynamic simulation of complex mechanism is introduced and applied to construction machinery such as hydraulic excavator.
介绍了应用反向动力学设计复杂机构三维动态模拟图形的方法，并具体应用到液压挖掘机等工程装备中。
In this paper, the basic theory of the inverse system method is introduced, and is used in the design of a spacecraft attitude control system.
本文首先介绍了逆系统方法的基本思想，然后将其用于航天器非线性姿态控制系统的设计中。
Inverse engineering or inverse design is a synthetical branch in modern design theory and method.
反求工程或反设计是现代设计理论和方法中的一个综合分支。
This paper deals with the inverse design problem of transonic turbine cascade in the hodograph plane by the finite area method.
本文给出了基于有限面积法的跨音速透平叶栅速度面反问题设计方法。
From the angel of minimizing the inverse transformer capacity, a method to design inverse transformer capacity based on the technical features of mine-well hoist was given.
通过从如何减小逆变器的装置容量入手，根据矿井提升机的工艺特点，给出了斩波串级调速系统逆变变压器容量的设计方法。
This method can be applied to the motion analysis and inverse seeking design of other mechanisms.
该方法可用于其它机构的运动分析和反求设计。
Based on model design and rotary wing design of helicopters, this paper introduces a multi targets inverse eigenvalue problem and gives a parallel method.
由模型设计和直升机旋翼设计问题出发，归纳出一类多目标逆特征值问题并提出一种适合在并行计算机上实现的并行算法。
Taking a beam element structure for example, this paper has deduced a calculating method for structures' inverse design, which satisfied static and dynamic characteristics of structures.
本文以梁元结构为例，推导满足结构静、动力特性的结构逆设计计算方法。
Aiming at the complicated design of three-phase PWM (Pulse Width Modulation) rectifier by using nonlinear feedback method, a linear feedback approach based on inverse system method is presented.
针对三相脉宽调制(PWM)整流器控制采用非线性反馈方法使控制器设计复杂化的问题，提出一种基于逆系统方法的三相pwm整流器的反馈线性化控制方法。
In this paper, it is discussed how to design an online error compensator for a fight control system by the method of nonlinear dynamic inverse.
本文讨论了一种具有在线误差补偿的非线性动态逆控制器设计方案。
Based on the principle of the dynamic inverse problem, this paper discusses the method of structural dynamic design of a road paver's vibrating bar.
基于动力学逆问题的基本原理，讨论了摊铺机振动梁结构动态设计中的主要问题。
A synthesis method based on inverse dynamics and online parameter identification was developed and was directly used to design the attitude controller in the integrated control system.
提出了一种基于逆动力学和在线参数辨识的方法，用于直接设计综合控制系统中的姿态控制器。
For different cab, using this method, we can train several inverse models to design and optimize the geometric parameters to make the reduction of noise in it.
而对于不同的驾驶室模型，运用该方法，可以训练出其用于反求的神经网络结构，该方法可以很好的对整个驾驶室的座椅几何参数进行反演。
For general nonlinear system, a control law design method which integrated the nonlinear dynamic inverse theory, adaptive fuzzy system and slide model control is developed.
对一般非线性系统，推导了一种综合运用非线性动态逆、自适应模糊逻辑系统和滑动模态控制进行控制律设计的方法。
This article describes the design method and steps of canonical from state observer of single output nonlinear systems, based on the theory of the state observers in the inverse systems method.
在逆系统方法中的状态观测器理论的基础上，给出了单输出时变系统的规范型状态观测器的设计方法与具体步骤。
On the aspect of creating mathematics and mechanics model, the modernistic design method such as inverse-do engineering, optimization design, CAD was adopted.
在推导数学模型和力学模型方面，借助了反求工程、优化设计、计算机辅助等现代设计方法。
This paper presents a new design method based on NX kinematic analysis, which can be used either for CAM traditional design or for inverse design.
提出了一种适合于凸轮正向和反求设计的基于NX运动分析的凸轮设计方法。
This paper uses inverse finite element method combined with forward finite element method to design blank of automobile panel, and proves its rationality by physical simulation.
本文采用有限元逆向法和正向法结合的方法，确定覆盖件零件的成形毛坯，并用物理实验验证了其合理性。
The design and a surface framework of 2D inverse software by analyzing 2D inverse procedure in high density resistivity method are introduced.
分析高密度电法二维反演过程，给出了二维反演软件的设计思路和软件界面框架。
Around this criterion of airfoil design, many design methods have been proposed, which can be classified into inverse method and direct method.
围绕这一设计准则和目标，提出了很多设计方法，归纳起来主要有反问题设计方法和正问题设计方法。
Employing the inverse perturbation method, we have tackled the problem of optimum design of the machine tool spindle.
用逆摄动法进行机床主轴的动力优化设计。
An Inverse system Method is introduced for nonlinear systems control, and the design theory for single variable nonlinear control systems is described.
介绍非线性系统控制的逆系统方法及相应的单变量非线性系统的控制理论。
The results of classical cases indicate that the sensitivity derivative gained by approximate method has good accuracy and the inverse design can be completed efficiently with reduced total CPU time.
典型的算例结果表明简化方法计算得到的敏感性导数具较高的精度，能够有效完成反问题设计且减少总的计算耗时。
Combining with the optimality criterion method and the bi-factor algorithm, the inverse eigenvalue problem for optimal Parameters design of elastic mechanisms is solved effectively.
采用最优性准则方法，给合结构优化设计中的双因子算法，有效地解决了给定弹性机构某几阶固有频率时设计构件截面参数这类逆特征值问题。
Combining with the optimality criterion method and the bi-factor algorithm, the inverse eigenvalue problem for optimal Parameters design of elastic mechanisms is solved effectively.
采用最优性准则方法，给合结构优化设计中的双因子算法，有效地解决了给定弹性机构某几阶固有频率时设计构件截面参数这类逆特征值问题。
应用推荐