Internal gear pump structure and other gear pump structure similar to, mainly by the outer rotor and rotor, pump shaft, pump body, the front cover, bracket, sealing device, bearing, etc.
内啮合齿轮泵的结构和其他齿轮泵结构类似，主要由外转子、转子、泵轴、泵体、前盖、托架、密封装置、轴承等组成。
Internal gear pump is the small gear wheel, the big gear for driven wheel, in work big gear with small gear cocurrent rotation.
内啮合齿轮泵中的小齿轮是主动轮，大齿轮为从动轮，在工作时大齿轮随小齿轮同向旋转。
Cycloidal tooth profile of the internal gear pump, also called cycloidal rotor pump, pump the small gear and internal gear only related a tooth, so the internal gear pump do not need to set partition.
摆线齿形的内啮合齿轮泵又叫做摆线转子泵，泵中的小齿轮和内齿轮只相关一个齿，因此这种内啮合齿轮泵不需要设置隔板。
These two kinds of internal gear pump working principle and external gear pump working principle the same.
这两种内啮合齿轮泵的工作原理和外啮合齿轮泵的工作原理相同。
High viscosity pump can match the relief valve, when the pump and piping system overpressure, safety valve is opened, the formation of internal reflux, ensure the safety of the system.
高粘度泵可配安全阀，当泵或管路系统超压时，安全阀门打开，形成内部回流，保证系统安全。
Internal gear pump has two kinds of tooth profile namely: involute profile and cycloidal tooth profile.
内啮合齿轮泵有两种齿形即：渐开线齿形和摆线齿形。
If the liquid contains gas or air the pump can be modified with either internal or external gas removal construction which stabilizes the operation.
如果输送液体含有气体，该系列的泵机可内置或外置排气装置，以保证输送稳定。
A new type of arc cycloidal internal meshing rotary pump was studied.
对一种新型圆弧摆线内啮合转子泵进行了研究。
To tackle engine noise, Perkins does things like balancing internal loads to the pump to optimize the overall design.
为了解决发动机噪音，珀金斯并不像内部负载平衡的泵优化的整体设计。
The revolving direction, internal oil hole position and spline shaft of the domestic pump are modified to meet the installation requirement.
为了满足安装的要求，对国产齿轮泵的旋向、内油孔位置和花键轴等进行了改造。
There is no internal scale product of dry screw pump owing to the late research starting, so like products are all depend on importing and the price is very expensive.
由于国内螺杆干泵的研究起步较晚，目前还没有规模化的产品，同类产品全部依靠进口，价格十分昂贵。
Supporting most of the internal combustion engine self-priming pump, mounted on a Mobile small car, suitable for field work.
自吸泵大部分与内燃机配套，装在可移动的小车上，宜于野外作业。
The pump features a variable discharge port design which adjusts automatically to the internal compression ratio of the vacuum pump resulting in maximum efficiency throughout the vacuum range.
我们公司生产的液环真空泵，具有不同的出料口，自动调节内部压缩率，已达到最大的真空效率。
Complete MACT-compliant cart mounted system featuring a internal mix PC LEL chopper gun and Binks Unison precision catalyst metering pump.
总MACT标准车安装此系统具有内部结构的PCLEL的菜刀枪和宾克斯融乐精密计量泵的催化剂。
The paper analyzes the pneumatic pump for SN-ratio test by use of the direct-product of internal and external tables , and has determined the optimal parameters.
采用内、外表直积法，对风动水泵进行了SN比试验分析，确定了其最佳参数组合。
Whereas conventional motor-powered pumps tend to get clogged, the artificial muscle pump has larger internal orifices, Walters said.
鉴于传统的电机驱动的泵往往堵塞，人造肌肉泵具有较大的内孔，沃尔特斯说。
An internal circulation loop of heating tank composed of three-function valve and jet tube is added in original pump arrangement.
本发明是在原有的泵油装置中，增加一套由三能阀及喷管等组成的加热罐内部循环回路。
This paper introduces the criterion and some noted problems of gear design for internal gear pump.
本文介绍了内啮合齿轮泵齿轮设计的准则及应注意的几个问题。
Internal combustion water power system integrated traditional internal combustion engine and plunger pump technique, made directly use of the rectilinear motion of plunger for output water power.
内燃式水动力系统将传统内燃机与柱塞式水泵技术集成为一体，直接利用活塞往复直线运动输出水动力。
NYP rotor pumps are mainly internal and external rotor, shaft, pump body, the front cover, brackets, seal and bearing etc.
NY P转子泵主要有内、外转子、轴、泵体、前盖、托架、密封、轴承等组成。
Apparatus adapted to perform as compressor, motor, pump and internal combustion engine.
适于作为压缩机，马达，泵和内燃机的设备。
A casing containing water circulated by a pump, used around a part to be cooled, especially in water-cooled internal-combustion engines.
含有水泵带动的循环水的外层壳体，用于包在需冷却部件的外面，尤指内燃机水冷却套。
The optimal economic working zone and economic curve were defined and compared with traditional internal combustion engine driving plunger pump.
定义了系统最佳经济性工作区域和最佳经济曲线，并与传统内燃机驱动柱塞泵系统进行比较。
The results show that the improvement of the slant improved oil-well pump 's internal structure and the optimization of the materials are the main factors to improve pump efficiency.
研究结果表明改进型斜井泵的内部结构的改进和材质的优选是泵效提高的主要因素。
The thesis introduces the net present value method and the internal rate of return method which are most commonly used in the long term investment of pump enterprises.
介绍了泵业企业长期投资决策中最常用的净现值法和内部收益率法这两种决策方法。
The gear form of internal gearing cycloidal gear pump has important influence on machining and characteristics of pump, such as flow rate, fluctuation rate and noise etc.
内啮合摆线转子齿轮油泵的齿形对泵的加工、性能(如：流量、脉动、噪声)等有很大的影响。
The utility model relates to an internal mixed self-sucking pipeline pump, which belongs to the improved technical proposal of a mechanical self-sucking pump.
内混式自吸管道泵，属于机械自吸泵的改进技术方案。
There is an urgent need to understand the internal flow slurry pump to improve the design methodology, improve pump efficiency and reduce pump wear and tear.
因此迫切需要了解渣浆泵的内部流动规律，改进设计方法，提高泵的效率，减少泵的磨损。
There is an urgent need to understand the internal flow slurry pump to improve the design methodology, improve pump efficiency and reduce pump wear and tear.
因此迫切需要了解渣浆泵的内部流动规律，改进设计方法，提高泵的效率，减少泵的磨损。
应用推荐