There are four typical patterns of corporate governance all over the world. They are supreme shareholder model, stakeholders model, employee co-determination model , and internal control model.
从全球的视角来看，目前公司治理的典型模式主要有股东至上、利益相关者共同决定、雇员共决双重治理、内部人控制等四种模式。
In this paper, a new type of generalized predictive control based on ARMAX model is proposed. The internal relations between the control strategy and model Algorithmic control (MAC) are revealed.
本文中提出了基于ARMAX模型的新型广义预测控制，揭示了其控制策略与模型算法控制(MAC)之间的内在联系。
The repetitive controller based on the theory of internal model produces correction signal based on the control error of the last cycle to eliminate the error in the latter cycle.
重复控制的基本思想是控制理论中的内模原理，根据上一周期的控制误差消除后面各周期性的信号误差。
A novel position controller for an electro-optical tracking system is designed based on Internal Model control (IMC) principle.
针对光电跟踪系统，提出一种基于内模控制原理的新型位置控制器设计方法。
A novel position controller for an electro-optical tracking system is designed based on Internal Model control (IMC) principle and characteristic of disturbance and reference input for system.
根据内模控制原理及光电跟踪系统参考输入及扰动输入特性，设计了一种新型位置控制器。
The accuracy of the rotor speed estimation in speed sensorless vector control system of induction motor under load is sensitive to parameter errors of the internal machine model.
在感应电动机无速传感器矢量控制系统中，在负载条件下转子速度估计的精确度对电机内部模型参数误差非常敏感。
The simulation model of air defense fire oppugning effect was based on simulation design theory, simulation control mechanism, model internal structure and model algorithm.
从仿真设计原理、仿真控制机制、模型内部结构和模型算法三方面研究防空火力抗击效果的仿真模型。
A novel internal model control structure with multiple output error feedbacks is proposed in this paper, by means of multi model decomposition technique.
通过对受控对象模型的并行结构分解，引入多重输出误差反馈，构成了一种新的内模控制结构。
In view of strong coupling system, a kind of simple internal model decoupling control designing method is presented.
针对多变量强耦合的被控系统，提出了一种简化的内模解耦控制设计方法。
The algorithm makes use of discrete model given by plant identification directly, deduces discrete internal model controller, and is used in computer control of industry manufacture directly.
该算法直接利用对象辨识给出的离散模型，导出离散的内模控制器，直接用于工业生产的计算机控制。
This paper proposes a new vector control system based on an model reference adaptive system(MRAS) of internal model current control.
本文提出一种新型的基于模型参考自适应的内模电流控制的矢量控制系统。
Separate designs of a dual PID controller were presented based on the large time-varying robust digital PID control combining with two degrees of freedom internal model control structure.
在大时变鲁棒数字PID控制方法的基础上，结合二自由度的内模控制结构，实现了控制器参数的数字双PID分离设计。
For the fact given above, a digital internal model control (DIMC) algorithm based on discrete model is developed.
该文针对这种情况，提出一种基于离散对象模型的数字内模控制(DIMC)算法。
For an industrial plant with high great lag, the current control strategy is Smith predictive control, or internal model control, both of them are using continuous models.
对于带有严重纯滞后的工业对象，目前的控制策略是史密斯预估控制，或者是内模控制，他们都要使用连续域的数学模型。
An internal model control strategy is proposed to a class of open loop stable nonlinear systems described by fuzzy neural networks.
针对一类开环稳定的非线性系统，提出了一种基于模糊神经网络的非线性内模控制方案。
Aiming at the strong nonlinear multiple variable coupling system, a new multivariable internal model control based on T-S fuzzy model was proposed.
针对强非线性、多变量耦合系统，提出了一种基于动态t - S模糊模型的约束内模控制策略。
In the internal model control design for nonlinear systems, the precise forward and inverse models of plant are required, but it is impossible in the majority of practical plants.
非线性动态系统的内模控制要求建立精确的对象正模型和逆模型，这对于大多数实际对象是难以做到。
This paper discusses waveform correction technique of the CVCF-SPWM inverter based on internal model control theory.
本文的研究内容是基于内模控制理论的CVCF - SPWM逆变器波形控制技术。
An internal model controller design for industrial process with dominant delay is proposed, it makes internal model control combine with double-port control and is a proved technique.
针对具有此种情况的大纯滞后工业过程，提出了一种将内模控制与双口控制相结合的改进的内模控制器设计方法。
The normal internal model control can get over the time delay of industrial process, but it cannot achieve a satisfactory performance during great mismatch of internal model with object model.
常规内模控制器具有克服时滞的优点，但是当被控对象与模型严重失配情况下，常规内模控制器的控制往往难以达到满意的效果。
The paper considers the designation of corporate internal control is to construct a functional model on the basis of the analysis of internal control style.
通过对企业内部控制方式的分析，认为企业内控制度的设计是建立一个功能模型。
This paper proposes an internal model control system based on recurrent neural network, and considers jigger layer loose condition as research object.
该文提出一种基于对角递归神经网络的内模控制系统，并以跳汰生产过程床层松散状况为对象进行了研究。
Combining a new parameter identification algorithm capable of online time varying delay prediction with internal model control, an adaptive IMC algorithm for time varying delay systems is proposed.
把一种新的能在线估计时变时滞系统参数的辨识算法与内模控制相结合，提出了时变时滞系统自适应内模控制算法。
So an active noise cancellation (anc) system for helicopter cabin noise based on adaptive internal model control technique, is developed in laboratory.
从而在实验室构造了一套基于自适应内模控制技术的主动消声系统(anc)。
Based on MATLAB, simulation results show that internal model control has simple structure and is easy to be designed and readjusted, so it has certain application value.
并基于MATLAB仿真研究表明，线性时滞过程的内模控制具有较好的鲁棒性，有一定的应用价值。
In view of large delay and uncertainty of the main steam temperature object in a power plant, combining with internal model controller, a control system based on adaptive PSD has been designed.
针对火电厂主汽温对象大迟延、不确定性的特点，结合内模控制器设计了基于自适应PS D控制器的控制系统。
We create Predictive Model by analyzing system of Semi-Active control. We design the controller of Semi-Active control system, research stability of system with Internal Model control (IMC) theory.
通过对建筑结构的分析研究建立了预测模型，结合内模控制的理论设计了半主动控制系统的控制器、并分析了系统的稳定性。
The relay feedback self-tuning PID based on internal model control (IMC) was adopted for self-tuning PID controller for long time-delay process.
大时滞过程的自整定pid控制器，采用基于内模控制策略的继电型PID自整定。
The approach is based on combining the concept of non-linear internal model control, strong acid equivalent(SAE) and self-adaptive mechanism.
该方案结合了非线性内模控制、自适应机制和强酸当量（SAE）的概念。
The approach is based on combining the concept of non-linear internal model control, strong acid equivalent(SAE) and self-adaptive mechanism.
该方案结合了非线性内模控制、自适应机制和强酸当量（SAE）的概念。
应用推荐