We also scheme out the signal conversion circuit and the new system anti-interference circuit.
并设计了信号转换电路和系统抗干扰电路。
Or you could sit at a bench with other technicians placing completed cell-phone circuit boards into lead-lined boxes resembling small kilns, testing each piece for electromagnetic interference.
又或者你得和其他技术员们一起坐在凳子上，将完工的手机电路板放到类似于小炉子的衬铅盒子里，以检测每块部件的电磁干涉。
If there is an ac potential difference between the shield and the measuring instrument, there may be capacitive currents flowing through the measuring circuit that will add interference.
如果屏蔽和测量仪器之间存在一个交流电势差，则可能有电容性电流通过测量电路，增大干扰。
Electrostatic coupling or interference occurs when an electrically charged object approaches the input circuit under test.
带电物体接近被测电路的输入端时，就会发生静电耦合和干扰。
In the application of above 24V fort current voltage grade control circuit, Voltage Alternating and resonant wave interference of input model for Programmable Logic Controllers must be resolved.
可编程控制器在高于24V的直流电压等级控制回路中应用时需解决输入模块的电压变换和谐波干扰等问题。
In so doing, that which is from the outside in origin is pushed from the field and prevented from interference as one has created a whole and complete circuit of energy flow.
这么做，当你创造了一条整体而完全的能量流回路后，来自外在起源的力量将被从场中推开而阻止干涉。
The circuit involves high impedance, so it's susceptible to electrostatic interference.
电路涉及高阻抗，所以容易受到静电干扰。
It is chiefly characterized by increasing the amplitude and the duty cycle of the signal, and reducing the interference of the daylight with a special circuit.
其主要特点是通过特殊电路提高信号的幅度和占空比，同时抑制日光干扰。
Interference from one telegraph circuit to another telegraph circuit or into telephone circuits.
一条电报线路或电话线路对另一条电报线路或电话线路的干扰。
These sources include thermoelectric EMFs, offsets generated by rectification of RFI (radio frequency interference), and offsets in the voltmeter input circuit.
这些误差源包括热电动势、由射频干扰(RFI)经过整流而产生的偏置量以及电压表输入电路中的偏置量。
The model's analog audio circuit board is isolated from the video board to avoid interference.
该模型的模拟音频电路板是分离的视频板，以避免干扰。
The circuit noise and digital pulse interference have been restrained effectively through the system analysis.
通过对系统的细致分析，有效地抑制了电路噪声和数字脉冲干扰。
The signal processing circuit has strong ability to suppress noise interference.
信号处理电路具有较强的抑制噪声干扰能力。
The hardware circuit is simple, and it has strong reliance and anti-interference ability, which is a kind of ideal SCR trigger.
硬件电路简单，可靠性高，抗干扰能力强，是一种比较理想的晶闸管触发装置。
A transformer-ratio arm bridge with three terminals is adopted as its measuring circuit to eliminate the influence of electrode edges and exterior interference.
相应地，它的测量电路采用具有三个输入端的变压器电桥，从而免除了电极边缘和外界干扰的影响。
The strong electromagnetic interference generated in high power TEA CO2 laser system mainly comes from the main discharge circuit, pulse spark switch and power supply.
大功率TEACO2激光器系统产生的强电磁干扰主要来源于激光器主放电回路、脉冲火花开关和电源。
The method can effectively reduce noise interference of the detecting circuit and increase signal noise ratio of the output signal.
该方法可有效地降低检测电路的噪声干扰，提高输出信号的信噪比。
The signal processing circuit has high ability to suppress noise interference.
信号处理电路具有较强的抑制噪声干扰能力。
Electromagnetic interference (EMI) in high-speed digital circuit is mainly generated by Common-mode (CM) noise, and the CM inductance is responsible for CM noise magnitude.
共模噪声是高速数字电路产生电磁干扰的主要原因，而共模电感又是共模噪声大小的决定因素。
Weak pulse signal, sensitive, vulnerable to interference, in order to eliminate the noise pulse test, the isolation circuits and multiple filter circuit design.
脉搏信号微弱、敏感、易受干扰，因此为了消除脉搏测试中的各种噪声，设计了隔离电路和多重滤波电路。
In the paper, the calculating method of signal extraction filter pass-band according to the paper-counting speed and the utility circuit of separating strong interference in pass-band are given.
并针对点钞速度给出了信号提取滤波器通频带的计算方法，以及在带内分离强干扰的实用电路。
The essential characteristics of transducer zero-excursion caused by common-mode interference are approached by means of a transducer equivalent circuit.
利用传感器等效电路，分析了共模干扰造成传感器零点变化的实质。
This paper analyses the common types of interferences in the electronic circuit and equipment, that is, internal interference, external interference, circuit interference and field interference.
分析了在电子电路、电子设备中常见的干扰类型，即内部干扰、外部干扰、路的干扰、场的干扰。
Discusses the joining recorded optical circuit and the selecting conditions of the distance between objects and between slits to rid of interference from either of two images.
讨论了合成的记录光路和为避免二物体的再现象之间互相干扰，二物体的间距和缝间距的选择所应满足的条件。
The idea of modularized design in hardware circuit of nodes can reduce the complexity of the design and reduce the interference of wireless circuit.
节点的硬件电路采用模块化设计思想，可以减少设计的复杂度，减小无线电路的干扰。
Also interference with telephone circuit is reduced because of the absence of zero-sequence currents.
由于无零序电流，对电话线路干扰的影响也降低。
Testing results show that the optimized circuit is superior to the original prototype in reading, writing distance, circuit size, and interference.
测试表明，优化后的电路在读写距离、电路尺寸、抗干扰性等方面都优于原样机。
Besides, simplify the circuit, improve dependability of the stabilizer and interference-free ability.
同时，简化电路，提高减摇鳍的可靠性和抗干扰能力。
Introduction to the problem of EMC in the operation of universal circuit breaker was made, that is the problem of interference and anti-jamming of universal circuit breaker.
介绍了万能式断路器在实际运行中的电磁兼容问题，即万能式断路器的干扰与抗干扰问题。
Experiments showed that the drive circuit had characteristics of reliable performance, powerful drive energy, strong anti-interference ability.
试验表明该驱动控制电路具有性能稳定、驱动能力大、抗干扰能力强等特点。
应用推荐