It monitors the health of a particular service (or services) through either a serial line or Ethernet interface or both.
它通过串行线、以太网接口或者同时使用二者来监测特定服务(或多个服务)的健康状况。
MIDI controllers and synthesizers are connected using cables that allow the commands to be sent between devices using an asynchronous serial interface.
MIDI控制器与合成器通过电线相连接，利用异步串行接口可以在不同设备间传送命令。
By using this technology, you can create interconnections that are more flexible than the serial interface supported by the MIDI standard.
利用这种技术，用户可以创建互连网络，比MIDI标准支持的串行接口更具灵活性。
The most obvious issue is that the interface in Listing 6 requires a JNI call for each bit set or retrieved, as well as a JNI call to read a byte from, or write a byte to, the serial port.
最显著的一个问题就是，清单6中的接口在设置或检索每个位，以及从串行端口读取字节或者向串行端口写入字节都需要一个JNI调用。
ESATA External Serial ATA is a branch off of the Serial ATA interface that connects your hard drive to your computer if it was put together in the last couple of years.
eSATA外部串行ata是串行ata接口的一个分支，用来连接硬盘到电脑，如果是最近几年的推出的新硬盘的话。
The simplest way of getting the data from the Arduino is with the unit connected directly to a host computer Universal Serial Bus (USB) interface, reading the data as if it were a serial connection.
从Arduino获得数据最简单的方式是让此单元直接连接到主机计算机的UniversalSerialBus (USB)接口，像串行连接那样读取数据。
For example, if we want to provide an interface to a serial port using JNI, we could come up with two different interfaces. One version is in Listing 6.
举例来说，如果我们希望使用JNI为某个串行端口提供接口，则可以构造两种不同的接口。
Examples of devices at this layer include the SLIP driver over a serial interface or an Ethernet driver over an Ethernet device.
例如，包串口使用的SLIP驱动程序以及以太网设备使用的以太网驱动程序都是这一层的设备。
The whole idea behind it is that this one interface will connect everything (except the stuff it doesn't), killing off the old guard, like parallel and serial ports.
这个接口的思想是用一种接口连接所有的东西（除了不能的），淘汰旧的，比如并口和串口。
Additionally, since it is based on a serial interface, SAS allows for increased device support.
因为它基于串行接口，所以SAS允许增加设备支持。
If the instruments have a GPIB or serial interface, you can control them with a computer equipped with a similar interface.
如果设备具有通用接口总线或串行接口，你可以通过一个带有相似界面的计算机来控制。
This register defines the physical serial interface which will be used for data communications.
这个寄存器定义了将用于数据通信的物理串行接口。
The paper introduces the design of the fingerprint reader based on computer universal serial bus interface.
介绍了一种基于计算机通用串行总线接口的指纹采集器的设计。
For example, more device drivers, such as network interface card (NIC) drivers and parallel and serial port drivers, are available for Linux than for commercial operating systems.
例如，用于Linux的设备驱动程序要比用于商业操作系统的设备驱动程序多，如网络接口卡(NIC)驱动程序以及并口和串口驱动程序。
The system can be divided into three modular by function, sensing data acquisition part, wireless data transmitting part, and universal serial interface part.
该系统从功能上可以分为数据采集模块、无线数据传输模块、通用串行总线接口传输模块。
The microprocessor adopts 89c52, and serial interface has adopted RS - 485, can download and debug online, and connect with other equipments.
微处理器采用89c52，并且串行接口采用了RS- 485，可以进行在线下载和调试，以及与其它设备的连接。
A single microcontroller controls the entire stack of battery monitors via the SPI-compatible serial interface, and it also is the gateway to the main CAN bus.
单个微控制器通过spi兼容的串行接口控制整组电池监视器，该微控制器也是至主CAN总线的网关。
In apparatus having a standard serial communication RS-232C interface, can be realized with the computer or computer communication.
仪器具有标准串行通讯RS- 232c接口，可实现与电脑或计算机的通讯。
The AD7656 has both a high speed parallel and serial interface allowing the devices to interface with microprocessors or DSPs.
AD 7656同时具有一个高速并行接口和一个高速串行接口，为器件与微处理器或DSP进行接口创造了条件。
The serial communication interface chip design was realized by application of schematic diagram and VHDL language.
采用自顶向下的设计方法，用原理图和VHDL语言这两种输入对串行通信接口芯片进行设计。
The communication of the master computer and subordinative computer adopts RS232 serial interface, which adapt the long distance communication.
微机和下位机的通讯采用RS232串行接口，适用于远距离通讯。
When in Serial interface mode the AD7656 has a Daisy Chain feature allowing multiple ADCs to connect to a single serial interface.
在串行接口模式下，AD7656允许多个ADC以菊花链形式连接至单个串行接口。
If the serial interface is not able to generate an interrupt, set this value to any unused interrupt vector address.
如果串行接口是无法产生一个中断，将此值设置为任何未使用的中断向量地址。
The conversion process and data acquisition are controlled using CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs.
转换过程和数据采集过程通过CS和串行时钟信号进行控制，从而为器件与微处理器或DSP轻松接口创造了条件。
SPCE061A duplexing asynchronous serial interface of communication can realize many machine communication, make up step type control system all.
SPCE061A的全双工异步通讯的串行接口可实现多机通讯，组成了步式控制系统。
The hardware connection drawing of serial interface between MCU AT89C52 and LCD is illustrated.
给出了单片机AT89C52与液晶显示器件的串行接口硬件连接图。
The single chip processor accomplishes quantify control in real time, the coding system's controlling results is outputted through the serial interface port.
单片机实时完成量化控制。实验中通过串行通信接口输出编码系统的控制结果。
It is helpful to the designer of serial interface communication program of the real time clock device.
该方法对于实时时钟器件串行接口通信程序的设计具有一定的借鉴作用。
It is helpful to the designer of serial interface communication program of the real time clock device.
该方法对于实时时钟器件串行接口通信程序的设计具有一定的借鉴作用。
应用推荐