If a server has multiple network interfaces, ensure that the HADR host name or IP address maps to the intended interface.
如果服务器有多个网络接口，那么一定要把hadr主机名或IP地址映射到适当的接口。
An IP address serves two principal functions: host or network interface identification and location addressing.
IP地址用于两个主要功能：主机或网络接口标识和位置寻址。
That's actually optional; the bridge doesn't need to have its own IP address, since it will transparently forward packets from one interface to the other.
这实际上是可选的；网桥并不需要有自己的IP地址，因为它将透明地把数据包从一个接口转发到另一个接口。
So, although you can change the media speed and duplex on the physical interface, you set up the IP address and subnet on the logical interface.
因此，尽管可以在物理接口上修改介质速度和双工模式，但是要在逻辑接口上设置IP地址和子网。
Once you configure the new IP address, set up the routes for the new interface, as shown in Listing 2.
配置了新的IP地址之后，要为新的接口设置路由，如清单2所示。
The REST API is available on the same IP address or hostname that you use to access the appliance GUI and command line interface (CLI).
RESTAPI在同一个IP地址或者主机(您用来访问设备GUI和命令行接口(CLI)的)上可用。
Set the IP address and physical network card interface ID for the zone created as shown in Figure 7.
为创建的专区设置IP地址和物理网卡接口id，如图7所示。
Any interface added to the bridge br0 will respond to that IP address.
任何添加到桥br0的接口都将对那个IP地址作出响应。
start. After heartbeat starts successfully, you will see a new interface with the IP address that you configured in the ha.cf file.
heartbeat成功启动后，您将看到一个新的接口，其IP地址是您在 ha.cf 文件中配置的那个。
Interface en2 is configured on top of ent2 and a valid IP address is assigned to en2.
在ent2上配置接口en2，给en2分配一个有效的IP地址。
On the AIX partition, an interface (not shown in the figure above) en0 can be created on top of the Virtual Ethernet adapter ent0 and a valid IP address can be assigned to it.
在AIX分区上，可以在虚拟以太网适配器ent0 上创建接口en0（上图中没有显示），可以给它分配一个有效的IP地址。
For future reference, once the network can access the switch, you can change the IP address of the SAN switch using the Admin interface from the network Config TAB.
还有一点可供参考，网络一旦可以访问此交换机，您就可以使用admin界面的Network config选项卡更改此SAN交换机的IP地址。
The Ethernet adapters being used were bonded into one interface with one IP address; each remote instance of netperf on the drivers sent messages to the IP address of the bonded interface.
使用的以太网适配器被绑定到一个接口，共用一个IP地址；驱动程序中的每个远程netperf实例都向这个绑定式接口的IP地址发送消息。
Then, at least one logical interface will be linked to this physical device, such as en0 or et0, on which the IP address will be configured.
至少有一个逻辑接口与这个物理设备链接，比如en0或et0，在逻辑接口上配置IP地址。
As for the Samba server, remember to do the tests with the icb-nfs IP address that corresponds to the management network defined in Tivoli Service Automation Manager administrative user interface.
对于Samba服务器，请记住使用TivoliServiceAutomationManager用户管理界面中定义的与管理网络对应的icb - nfsIP地址来执行测试。
We use static IP addresses for both interfaces: the public network interface eth0 has the IP address 192.168.17.201; the cluster network interface eth1 has the IP address 192.168.112.1.
我们为两种接口均使用了静态IP地址：公共网络接口eth0的IP地址为192.168.17.201；集群网络接口eth1的IP地址为192.168.112.1。
Change the IP address on the backup server to match that of the original server or add a network interface card with the IP address of the original server.
修改备份服务器上的IP地址以匹配原始服务器的IP地址，或者添加一个网络接口卡，使用原始服务器的IP地址。
If you want to add another IP address from the same subnet to an interface, it's simple and can be done with IP aliasing.
如果希望给接口添加同一子网中的另一个IP地址，可以用ip别名轻松地实现。
After heartbeat starts successfully, you should see a new interface with the IP address that you configured in the ha.cf file.
当heartbeat成功启动后，您应该看到一个新的接口，其地址是您在ha . cf文件中配置的地址。
After heartbeat starts successfully, you should see a new network interface with the IP address that you configured in the ha.cf file.
heartbeat成功启动后，您应该看到一个新的网络接口，其IP地址是您在ha. cf文件中配置的那个IP地址。
With your favorite editor, change the interfaces parameters to meet your configuration requirements. The following is an example of an interface, ifcfg-eth0, with a static IP address
使用您喜欢的编辑器，根据配置需求修改接口参数。
In order to address issues of standardization of IP video surveillance, the Open Network video Interface Forum (ONVIF) industry group has been established in 2008.
为了解决IP视频监控的标准化问题，打开网络视频接口论坛(ONVIF)工业集团成立于2008年。
Every interface on an Internet must have a unique Internet address (also called an IP address).
网络上每个接口都需要有一个唯一的地址(也叫做IP地址)。
Occurs when the IP address of a network interface changes.
在网络接口的IP地址更改时发生。
What would happen if, when you manually added an entry, you entered the correct IP address, but the wrong Ethernet address for that remote interface? 2.
假如你为一个近程接口使用这条命令，输入了正确的IP地址，但是输入了错误的物理地址，会发作什么？
What would happen if, when you manually added an entry, you entered the correct IP address, but the wrong Ethernet address for that remote interface? 2.
假如你为一个近程接口使用这条命令，输入了正确的IP地址，但是输入了错误的物理地址，会发作什么？
应用推荐