Conclusion: Bluetooth based wireless communication system has the advantages of high reliability and simple interface.
结论：基于蓝牙的无线通讯系统有接口简单、传输可靠的优点。
A system structure was designed as five tiers of communication tier, interface tier, model tier, feature description tier, and router description tier.
同时，设计了通信层、接口层、模型层、特征描述层和路由描述层的体系结构，解决了特征级感知和感知通信的问题。
The topology of control network, system management, communication between control equipment and CPU, human machine interface (HMI) were clarified.
阐述了控制网络的结构，系统的管理，所控制设备与控制器间的通讯及人机界面。
In the section of hardware design, selection of the CAN bus communication interface card, design of CAN nodes and the signal acquisition system are introduced.
在其硬件设计中，着重介绍了CAN总线通讯接口卡的选择、CAN节点设计与信号采集系统设计。
The data communication through computer's serial interface is often involved in the design of distributing control system.
在集散控制系统设计中，经常会涉及到利用计算机串行接口进行数据通信。
Data communication system, method, apparatus and digital interface.
数据通信系统，方法，装置和数字接口。
The paper discussed the hardware, software and the pretreated circuitry of the system, expatiated the interface circuit and communication mode between AD and DSP.
论述了该系统的软硬件设计以及预处理电路，详细阐述了AD和DSP的接口电路以及通信方式。
AIS system is composed with communication processing module, base band processing module, radio module and interface module.
AIS系统由通信处理模块、基带处理模块、射频模块和接口模块组成。
In the view of the control system, the paper discuss hardware architecture, software architecture, interface architecture, data communication, and servo control system.
文章从系统角度讨论了卷簧机数控系统的硬、软件构成，界面结构，数据通讯及伺服控制。
This paper is based on developing the PCI communication card of MSCIS interface system and Device Driver of the communication card.
论文是在研制MSCIS接口系统的PCI通信卡和开发通信卡设备驱动程序的基础上完成的。
Making use of USB technology, adopting USB module CH375, realizing communication between USB interface of many detection channels and computer in accelerator nuclear radiation monitoring system.
利用USB接口技术，采用US B模块CH375，在加速器核辐射监测系统中实现了多个探测通道usb接口与计算机通信。
The friendly communication interface and intelligent study function of expert system are provided, which is convenient for the experiment operator to study the knowledge and accumulate experience.
通信界面人性化，配有专家系统等智能学习功能，便于实验操作人员对实验知识的掌握和经验积累。
Finally, the system interface operation, plotting accuracy and communication functions are tested comprehensively.
最后，对系统界面操作、标绘精度和通讯功能进行了全面的测试。
The system structure and interface as well as communication protocol were introduced in details in the article.
详细的介绍了系统的总体结构、系统的接口和通信协议的设计。
SPCE061A duplexing asynchronous serial interface of communication can realize many machine communication, make up step type control system all.
SPCE061A的全双工异步通讯的串行接口可实现多机通讯，组成了步式控制系统。
Second, according to the whole scheme, the paper explains particularly the hardware design of data storage and display system and the communication interface design of data acquisition system.
其次以总体方案为背景，就系统中的数据存储及显示系统的硬件设计，和数据采集系统的通信接口硬件设计进行了详细的介绍。
Through balancing the excellences and disadvantages between USB and IEEE1394, we selected the USB2.0 interface to perform the communication between embedded system and computer.
通过对比USB与IEEE1394的优缺点，本课题选择了USB2.0协议作为嵌入式应用系统与计算机的通信接口方案。
USB interface applied to wireless Laser communication system is formulated in this paper. Two Computers can communicate through this interface.
提出一种计算机通讯系统的USB接口电路，通过其可完成两台计算机之间远距离激光无线通信任务。
It is both simple and practical by adopting usual computer and making it connect with NC system through interface of RS232 for communication.
如果采用普通计算机，通过RS232接口，实现与NC系统的通讯，就简单实用得多。
Through the communication between PC and RS-232 interface, a small testing system for industrial field can be directly formed controlled by computer.
通过RS- 232接口与PC通讯，可直接构成由计算机控制的小型工业现场测试系统。
The system has RS-485 communication interface, and is up to the standard of ACPI.
该系统留有RS-485通信端口，符合先进电源接口（ACPI）规范。
An embedded system also contains memory device, IO and other communication interface.
同时，嵌入式系统还包括存储设备以及其他IO和通讯设备接口等。
The ARINC429, MIL-STD-1553B and CAN avionics bus interface communication system based on Field Programmable Gate Array (FPGA) are designed, which links different bus instruments.
采用现场可编程门列阵设计arinc 429,MIL-STD - 1553B航空总线接口通信系统，实现总线设备之间的互联。
An idea of dual network SCADA system is proposed and the function design, implementation method and programming interface of dual network communication software are introduced.
提出了采用双网络结构的思想，并详细介绍了双网络通信软件的功能设计、实现方法及编程接口。
Based on industry's Ethernet, the paper introduced the systematic hardware composition and designed the data communication interface between the system and the production control computer.
以工业以太网为基础，介绍了系统的硬件组成，设计了与生产控制计算机之间的数据通信接口。
The software part of the interface includes basic information management system of nc tool and multiple serial port communication etc.
该接口软件部分主要包括串口通讯、数控机床基础信息管理等功能模块。
This, combined with the flexible interface and powerful communication capability of TMS320C40 , made the system be easily configured as SIMD, MIMD parallel and pipeline structures.
电路采用可变结构帧存形式，与两片TMS320C40灵活的外部接口及强大的通信能力相结合，使系统可方便地组织成SIMD、MIMD等并行处理结构及流水处理结构；
The problems of hardware configuration and computer communication interface existed in original system are pointed out.
提出了原来系统中硬件结构及计算机通信接口的不合理方面的问题。
Based on the USB bus interface chip CH375, we design the locomotive signals data recording system, and detail the design of communication interface of CH375 and TMS320F2812.
基于USB总线接口芯片CH375，设计了机车信号记录仪数据记录系统，并详细阐述了CH375与TMS320F 2812之间的接口设计。
Based on the USB bus interface chip CH375, we design the locomotive signals data recording system, and detail the design of communication interface of CH375 and TMS320F2812.
基于USB总线接口芯片CH375，设计了机车信号记录仪数据记录系统，并详细阐述了CH375与TMS320F 2812之间的接口设计。
应用推荐