An optimized hash table algorithm-move-to-head (MTH) is introduced to improve the state inspection speed.
提出了一种哈希表优化算法(MTH)以提高状态检测的速度。
The quality inspection instrument has the advantages of novel structure, lower cost, higher inspection speed and reliable performance.
该质检仪具有结构新颖、成本较低、检 测速度较快、性能可靠的优点。
How to improve the precision, speed, and reliability of vision inspection system is its important research aspect.
如何提高视觉检测技术的测量精度、速度及可靠性是其主要研究内容。
The structure of inspection system on VCM based on machine vision is designed to meet the problems of dimensional inspection methods on VCM at present such as low speed, low grade precision and so on.
针对目前VCM磁钢片轮廓尺寸的检测方法存在检测速度慢、精度低等问题，设计了基于机器视觉的VCM磁钢检测系统的总体结构。
Under the premise of the sufficiently low misjudgment ratio, inspecting speed is the key factor for the application of vision inspection system.
在检测误判率足够低的前提下，检测速度通常是制约视觉检测系统在线应用的关键因素。
The result shows that inspection at site and feedback can effectively improve the control ability of speed perception in sliding phase.
结果表明，现场监测与反馈训练能有效提高运动员助滑速度知觉的控制能力；
In order to improve the speed and precision of image Mosaic for IC vision inspection, a fast and accurate image Mosaic technique based on precision grating measurement system was presented.
为了提高IC芯片视觉检测中图像拼接的速度和精度，提出一种基于精密光栅运动系统的快速精确图像拼接技术。
The use of a water softener may increase the speed of anode consumption. More frequent inspection of the anode is needed when using softened (or phosphate treated) water.
水的软化装置可能加速阳极棒的损耗。如果使用软化（或经过磷酸盐处理）的水，应该更加经常检查阳极棒。
According to inertia principle, rail undulatory wear inspection system adopts analog digital composite filtering method to process data and eliminates the speed influence on measurement results.
钢轨波磨检测系统根据惯性测量原理，采用模拟—数字混合滤波的数据处理方法，消除了速度对检测结果的影响。
For the magnetic leakage flux system for steel tube flaw online inspection, normally multi-sensor technique is used to ensure the detecting speed and sensibility.
钢管在线漏磁检测中为保证检测的速度及灵敏度，一般采用多路传感器检测技术。
The authors introduce the troubles inspection methods of the manual control switch, speed control switch, gas-pressure control switch and relay box of electromagnetic retarders used in Yutong coaches.
介绍宇通客车电涡流缓速器手控开关、速度控制开关、气压控制开关、继电器盒等故障的检测方法。
Geotechnical radar can be used widely in the inspection of hidden objects in civil engineering with great advantages in speed, efficiency, precision and resolution.
将地质雷达技术应用于土木工程检测，具有速度快、效率高、准确性及分辨率高的特点。
To increase the speed of ultrasonic inspection for large thin plate, the ultrasonic guided waves and their applications to the defect inspection of large thin aluminum plate are studied.
为了提高大型薄板超声检测的速度，研究了超声导波及其在大型薄铝板缺陷检测中的应用。
Double apron web take-off device allowing visual inspection of the web ensures sliver delivering constantly at high speed.
可视棉网的双皮圈导棉装置，保证棉条高速稳定输出。
Special requirement in high speed guide way inspection including inspection frequency up to 200~1000HZ, synchronization in 32 channels and 16 bits A/D conversion are considered in this paper.
轨道梁检测要求检测频率达到200~1000HZ，同时要求所有32路通道同步采集数据，并且要达到16位的A/D转换精度。
By cleaning molten steel, controlling casting temperature and withdrawal speed, the compliance ration in ultrasonic inspection of plate was enhanced from 82.5% to 92%.
采取提高钢质纯净度、控制浇注温度和拉速等改进措施，检测合格率由82.5%提高到92%。
The non-destructive laser inspection is mainly used to detect the seperation and blister in airplane tire and high speed tire.
轮胎激光无损检测技术主要用于航空轮胎和高速度级轮胎内部脱层和气泡的检测。
High-speed digital video acquisition is important for the image inspection in ballistic trajectory.
在弹道测量中，高速数字图像数据的获取有重要意义。
This system is excellent in speed, real-time and stability. Consequently, the competitive forces of the appearance inspection equipment are enhanced greatly.
本控制系统速度快、实时性强和稳定性高，大大提高了外观检测机的市场竞争力。
The experiments demonstrated that this method is of high accuracy and high speed, satisfying the elementary requirements of automatic cloth inspection.
试验证明，这种方法的准确性较高，速度快，基本接近自动验布系统的要求。
The optical inspection technology of surface defect, as for defects of hot continuous casting slabs, has advantages of high speed, contactless and high resolution.
光学缺陷检测技术，对热连铸坯表面缺陷而言，具有高速、非接触、高分辨率等优点。
A high speed on-line image recognition and width measurement method for edge defect is put forward. Inspection result is given last.
提出一种高速在线边缘缺陷图象识别和宽度测量算法，并给出了检测结果。
By making full use of the outstanding merits of the laser optical fiber sensing technology, a non contact, high speed inspection for the precision products is realized.
测试系统充分发挥了激光光纤传感测量方法的突出优点，实现对精密产品的非接触、快速地检测。
The method based on workpiece surface images either cannot be used for online inspection because of the difficulty to obtain images in high speed circumrotating of workpieces.
基于工件表面图像的视觉监测方法，由于工件的高速旋转时，难以获取工件表面的清晰图像，也不宜用于切削过程监测。
A new algorithm of nondestructive, automatic and high-speed inspection is proposed for dark-field image to be used to inspect online optic component damage on high power laser system.
基于强激光系统光学元件损伤的在线暗场成像检测，提出了一种无损、自动、快速检测的新算法。
The flow patterns were observed by a high speed video system and also by visual inspection. Their void fractions were measured.
流型的确定采用了高速录相机系统，也同时进行肉眼观察，并测量了不同流型的空隙度。
The Industrial Computed Tomography(ICT) inspection need deal with large processing data and requests high resolution of reconstruction image, thus demanding high-speed of reconstruction algorithm.
工业CT检测扫描数据量大，重建图像分辨率要求高，并且要求重建算法有很高的重建速度。
As compared with same international detectors used for railway ultrasonic inspection, this new one has 5 new designs that have the highest speed.
通过五项新型设计，该探轮的技术水平应为目前国际同类产品最高速度水平。
Because of human factors and the impact of outside interference, the traditional test of the quality is low-speed, low efficiency, high rate of missing inspection.
由于存在人为因素和外界干扰的影响，传统的人工质量检测存在速度低、效率低、漏检率高等问题。
Because of human factors and the impact of outside interference, the traditional test of the quality is low-speed, low efficiency, high rate of missing inspection.
由于存在人为因素和外界干扰的影响，传统的人工质量检测存在速度低、效率低、漏检率高等问题。
应用推荐