The surface plate consists of foam plastic, an ink layer and a compound flow-casting layer.
所 述表板包括有泡塑、油墨层、复合流延层。
Business card printing and membership card making ink layer fastness, ink also plays a decisive role.
在制卡和会员卡制作墨层牢度问题上，油墨也起着决定性的作用。
In the work, I apply lines layer upon layer and cover them by ink layer upon layer so that dense visual effect comes out.
在作品中作者运用层层的线条，并用黑墨再层层覆盖，形成浓重的视觉效果。
The base plate consists of foam plastic, an ink layer, an adhesive layer, a film layer and a compound flow-casting layer.
所述底板包括有泡塑、油墨层、粘合剂层、薄膜层、复合流延层。
The thermosensitive ink layer 102 becomes transparent by heating and the figure 104 on the substrate 101 is also visible.
而 且，能观察到加热时感热墨水层（102）变透明，基材（101）上的图 案（104）进一步重叠。
Add 10% of form a complete set, improve product increase adhesion stiffening agent the versatility and ink layer hardness.
添加10%的配套硬化剂增加附着力，提高产品的通用性和墨层硬度。
Screen printing, printing ink layer thickness of the graphic stereo sense is strong, is the other way is to compare the printing.
丝网印刷的墨层厚，印刷的图文立体感强，是其它印刷方式无可比较拟的。
It can make high speed printing for cloth, textile and rolling paper. The ink layer is thick and solid. The color duration is good.
可以对布质质、缎织、卷筒纸等作稳定高速印刷，墨层厚实，色牢度好。
It’s crafted from natural cotton and recycled paper layer and it doesn’t use any chemical ink or adhesives that are tough to recycle.
它是由天然棉和可循环的纸质层精制而成，它没有使用任何难以回收再利用的化学油墨或是制剂。
A pixel is built by sandwiching a layer of P-Ink, along with a small amount of electrolytic fluid, between two transparent electrodes.
如果将P -Ink的一个层面与小数量的电解流体相结合，那么两个透明的电极之间就形成一个像素。
Sunset will be the twilight of the hill on the island, fishing on homes over a layer of orange-red glow, like a rich color of the splash-ink painting.
落日的余晖将岛上的小山、渔舍笼罩上了一层橘红色的光晕，好似一幅色彩浓郁的泼墨国画。
This paper also presents a main introduction of components characteristics of the ink receiving layer.
同时重点介绍了墨水接受层的组成特点。
A composition for an ink acceptable layer has excellent light resistance and discoloration resistance while maintaining improved ink fixation properties and glossiness.
用于油墨接受层的组合物，其具有优异耐光性和耐褪色性，同时保持改进的油墨固定特性和光泽度。
Principles and experimental result of removal of photosensitive layer and ink film on used PS plate by plasma chemical method are reported.
报告了利用等离子化学方法除去旧PS版表面感光层和油墨的原理和实验结果。
Preferably the etch-resist ink is applied as a layer of from 1 to 50 microns thick.
最好是蚀刻，抗油墨的应用是作为一个从1到50微米厚的一层。
The ink ribbon is characterized in that an ink containing layer of the present printing ink ribbon is removed, and only a nylon based ribbon is reserved.
该打印带的特点是去掉现行打印色带的含墨层，仅保留尼龙基带。
This paper describes the development successfully of super thin and high multi layer board (MLB) using ink jet technology.
概述了应用喷墨技术成功地开发了超薄型和高多层的多层板。
It was discussed that the effect of size-stability, thickness, roughness of coating layer, and ink absorption and printability of special paper for stamp in this paper.
文章论述了特种邮票纸的平整性，松厚度，涂层表面粗糙度，油墨吸收性与印刷适性的关系。
This paper introduces some characters of coating layer of the Ink Jet photo grade paper in brief.
简单介绍了喷墨打印照片纸的涂层特点。
In step four, a layer of conductive ITO ink is applied to cover the layer of EL phosphor ink.
在第四步骤，涂一层导电ito油墨，以覆盖el磷光体油墨层。
The composition for forming an ink acceptable layer according to an exemplary embodiment includes a fixing agent, an inorganic filler, a binder and a solvent.
用于形成根据本发明的示例性实施方式的油墨接受层的组合物包括固定剂、无机填料、粘合剂和溶剂。
Thee file is then turned into instructions for the printing equipment, so that it can lay down tiny droplets made out of the cell-based "bio ink" one layer at a time.
然后这个文件就成为了打印器设备的指示，以便设备把基于细胞生物墨水的微小滴液一层一层地铺好。
The outer casing is pasted with a metallizing plastic film layer with various colors and patterns printed by ink to accomplish the decorative effect of the outer casing.
在外壳上用油墨印刷各种花色图案的金属化塑料薄膜层直接粘贴上，完成了外壳的装饰作用。
The object of the invention is to provide a method of processing a nozzle plate whereby portions around ink ejecting holes of an ink-repellent layer is removed.
本发明提供一种能通过简便方法有选择地除去喷墨口（喷 嘴开口）周围的防墨层的、喷嘴板的加工方法等。
The ink segments are dried on the base layer by UV curing to a height and a hardness sufficient to form a heat stable textured surface adhered to the base layer.
通过UV固化，油墨断片在基础层上干燥成足以形成粘合到基础层上的热稳定的织纹表面的高度与硬度。
An ink jet head is provided with a passage unit, an actuator unit, and a conductive adhesion layer.
一种喷墨头设有通道单元、促动器单元和导电粘性层。
The 'ink' used is a mixture of recycled construction waste, glass, steel and cement which is sprayed on layer by layer until a thick wall is created.
而打印这些房屋所使用的“油墨”主要是可回收建筑垃圾、玻璃、钢筋以及水泥等。
The external surface of the cup is printed with a second layer of heat sensitive ink that is revealed when hot water is poured into the cup.
在杯子的表层用上温变油墨（热敏油墨）。当热水倒入时，上面的图案慢慢发生变化。
The external surface of the cup is printed with a second layer of heat sensitive ink that is revealed when hot water is poured into the cup.
在杯子的表层用上温变油墨（热敏油墨）。当热水倒入时，上面的图案慢慢发生变化。
应用推荐