In injection molding, plastic material gets loaded into a hopper and proceeds into a heated injection unit.
注塑成型，塑料材料被装入一个漏斗和收益进入了激烈的注射单元。
The electric machine impels the injection unit to move forward with spring and touches the spout and the model.
电动机通过弹簧使注射单元前进，使喷嘴与模具抵接。
As for disadvantages, it requires a special nozzle and check ring to accommodate material coming back into the injection unit.
至于缺点，它需要一个特别的喷嘴和挡圈来容纳材料的回退。
The balance calculations were carried out of energy and momentum of reactant flows in an impingement mixing unit used for reaction injection molding.
对反应注射成型机所采用的碰撞混合器进行分析，并就其进料喷嘴及混合室中的物料流动进行了能量及动量衡算。
The analyser or sensing unit contains the sample - injection valve.
分析和传感单元内有注样阀。
As a result, Kuhuang Injection can vastly promote bile secretion of anesthetic rat and markedly increase bilirubin content in bile in unit time.
实验结果，苦黄注射液能显著促进麻醉大鼠的胆汁分泌，并能明显增加单位时间内胆汁中胆红素的含量。
The gas lifting system is a narrow system extraordinary, including compressor unit, injection channel, lift valve and lifting passage.
气举系统是一个非常严密的系统，包括压缩机组、注入通道、气举阀和举升通道几个部分。
It is composed of a signal injection device, wireless nodes, a wireless process unit at the switch station and an intelligent fault detection system.
该系统由信号注入装置、无线节点、开关站无线处理单元和智能故障信息处理系统构成。
In operation, the control unit selectively actuates the fluid delivery system to operate in a fluid injection mode or in a balloon inflation mode.
在工作时，控制单元选择地致动流体输送系统以流体注射模式或球囊充胀模式运行。
There are 6 injection Wells in this unit, 5 Wells were selected to be carried out profile control by means of the decision factor.
从该单元的6口注水井中，根据决策因子优选了5口井进行调剖。
Test unit made by oneself was adopted, the data of injection mould cavity average pressure were first got from checkout in home. In addition, they can be dynamically shown and automatically recorded.
本文采用自行研制的测试装置，在国内首次测得注塑模具模腔平均压力的数据，并能达到动态显示、自动记录。
A combined fluid injection and inflation system is disclosed and includes a fluid delivery system including at least one pressurizing device, a fluid path, and a control unit.
本发明揭示了一种流体注射和充胀联合系统，该系统包括设有至少一个加压装置的流体输送系统、流体路径和控制单元。
The basic unit structure of the SI is introduced in this paper. It also discusses the main factors which affects the precision of fault diagnosis and analyzes the charge injection error in detail.
介绍了开关电流电路的基本单元结构，讨论了影响故障诊断精度的主要因素，重点分析了电荷注入误差。
The mould then will be closed again, the ejectors will return, the unit will advance and the sprue tube will come again in contact with the tools to carry out a new injection.
然后模具再次闭合，顶针复位，进胶部分前行，料桶再次与相关部位相连以实现下一次新的注塑。
Clamping force is an important attribute of the clamping unit of a PIMM. It is the maximum force the machine is capable of to keep the mould closed against the cavity pressure during injection.
锁模力是注塑机一个非常重要的参数，它是注塑机在注射过程中保持模具闭合状态以抵御型腔压力所提供的最大压力。
An analysis of motional and mechanical characteristics for double toggle clamping unit with straight five points of injection molding machine is made by the structural method.
利用机构学的方法对注射成型机五孔直排式双曲肘合模机构进行运动和力学特性分析。
By using the modern design theroy methods the double toggle clamping system of injection machine is discussed in defail mathematical models for clamp unit design in particular.
采用现代设计理论和方法对注塑机双曲肘五支铰合模机构进行设计研究，建立了符合工程实际应用的双曲肘五支铰合模机构理论模型，并应用复合形法原理。
With tubular polysulfone ultrafiltration membrane separation unit treating the produced sewage on the spot, the treated sewage can meet the water injection standard in low permeability oil field.
用管式聚砜超滤膜分离装置现场处理采油污水，经过处理的污水达到了低渗透油田注水标准。
The total heat loss per unit time decreases gradually as the injection pressure, injection flow rate and injection time increase, but the decrease extent reduces gradually.
随着注入压力、注入流量以及注入时长的增加单位时间的总热损逐渐减小，但是降低幅度变缓。
Dependency injection bolsters unit testing by enabling a mock implementation of a service to be world of warcraft gold injected into the service being tested.
依赖注入工作台通过实现一个模拟实现服务成为服务注入到魔兽世界黄金被测试单元测试。
The application status of the power unit in electro-hydraulic injection moulding machine is introduced, and the merits of electro-hydraulic injection moulding machine are pointed out.
对本课题系统在电液混合驱动注塑机中的应用情况进行了介绍，指出了电液混合驱动注塑机的优点。
The new Discovery ACTS as the launch platform for the Td5 engine, a five-cylinder, 2.5-litre direct injection diesel engine featuring high pressure electronic unit injectors.
新款发现成为了Td5发动机发布的平台，这是一款5缸2.5升直排式柴油发动机与高压电子装置。
The characteristics of electronic unit pump(EUP) fuel injection system were studied when matching tangent cam profile.
研究了电控单体泵燃油系统特性在匹配切线凸轮型线下的燃油特性。
Piston-cylinder is the fuel measurement unit of the injection flow meter and plays a crucial role in the system measurement accuracy.
活塞测量缸作为测量仪的油量测量单元，其结构设计好坏直接影响到系统的测量精度。
An electronic control unit has been developed for dualfuel automobiles. It can be used in an electronic injection engine, and it can also be used to upgrade dualfuel autos engines with carburetors.
介绍了一种双燃料发动机电子控制单元开发，该控制单元不仅可以用于电喷发动机，而且可以用于化油器发动机的双燃料汽车改造。
An electronic control unit has been developed for dualfuel automobiles. It can be used in an electronic injection engine, and it can also be used to upgrade dualfuel autos engines with carburetors.
介绍了一种双燃料发动机电子控制单元开发，该控制单元不仅可以用于电喷发动机，而且可以用于化油器发动机的双燃料汽车改造。
应用推荐