In the fluid injection mode the pressurizing device delivers fluid to the fluid path for a fluid injection procedure.
在流体注射模式中，加压装置将流体输送到流体路径以进行流体注射程序。
Then the multi-pulse injection mode modulation technique is presented and a serial of modulated injection modes are designed.
进而提出了多脉冲喷油模式的调制技术，并设计了一系列调制喷油模式。
For the injection mode, the invention provides a reciprocating single-screw type structure and an extrusion one-line type injection structure.
在注射方式上，本发明提供了两种形式，一是往复单螺杆式，二是挤压一线式注射结构。
The ratio of producers'productivity to injectors'injectivity for areal well pattern can greatly affect the choice of reasonable injection mode.
面积注水井网生产井的产出能力与注水井的注入能力之比，对合理注水方式的选择有着重要的影响。
In operation, the control unit selectively actuates the fluid delivery system to operate in a fluid injection mode or in a balloon inflation mode.
在工作时，控制单元选择地致动流体输送系统以流体注射模式或球囊充胀模式运行。
The later includes well spacing, injection mode (gas injection or gas alternating water injection), solvent cumulative injection amount and the alternating frequency, etc.
工程因素包括井距、注入方式(注气或气水交替)、溶剂注入量、气水交替频率、射孔位置等。
Depending on the type of LC, check whether you have a no-waste injection mode or partial loop fill. Obviously the firse option is preferred as this prevents using more sample than actually injected.
根据液相色谱仪的型号，确认配备的是“不浪费样品进样方式”或“部分充满定量环进样方式”。
Some experimented results gained in a 5-valve engine prove that this new injection mode can reduce fuel consumption by 17% than that of the conventional one, and improve exhaust emission performance.
在一台五气门汽油机上实验证实这种新喷油方式能够节油17%左右，并明显改善排放性能。
Objective: To discuss the clinic effect on the treatment of hemiparalysis patients in a mode of the carotid artery pressure injection of Tankangling (TKL).
目的：探讨颈动脉加压注射瘫康灵治疗偏瘫患者的临床疗效。
In view of local measurements on implication and control of UPFC, the control mode of reactive currents control and voltage injection should be used.
提出在基于本地测量参数的UPFC的应用级控制中采用“无功电流控制”和“电压注入控制”的模式。
The mode locking means is adapted to be in the first extreme position during dose setting and the second extreme position during injection of a set dose.
该模式锁定装置适合在设定剂量过程中处于第一极限位置，且在注射设定剂量过程中处于第二极限位置。
The article discusses the differences in physical mechanism of mode locking by laser pulse injection between the dispersion region at positive group velocity and that at negative group velocity.
本文阐述工作于正、负群速色散区中的光脉冲注入锁模的物理机制的区别。
In the system, composite application in dosing mode for an anaesthesia machine can be realized through the connecting seat on the dosing port of the injection seat.
在本发明中，通过在注液座的加药口上设置连接座，可以实现麻醉机加药方式的复合应用。
The study shows that cyclic steam injection rate, soaking time, flowing bottom hole pressure and blowdown mode are important factors influencing the effectiveness of single well steam stimulation.
分析认为，周期注气量、注气速度、浸泡时间和生产过程中的井底流压及降压方式都是影响单井吞吐效果的重要因素。
The failure mode and consequence that the low pressure safety injection system may occur, and the measure to improve the reliability of the system is analysed in this paper.
本文分析了低压安全注射系统可能发生故障的原因与后果，以及提高其安全可靠性所采取的措施。
Conclusion: the gray theories can be used for establishing the fleetness intravenous injection pharmacokinetics mode...
结论：灰色理论可用于建立静脉注射药物动力学模型。
The effect of different diesel parameters such as spray impingement mode and fuel supply advanced Angle and injection opening pressure on the performance and emissions is compared and analyzed.
比较分析了柴油机不同参数，包括喷雾碰撞形式、供油提前角、启喷压力等对第三代伞喷燃烧性能和排放的影响。
That the optimum fuel injection timing corresponding to one operating mode of engine is determined by adjusting the solenoid valve can improve economy and power, and lower the emissions of engine.
这样通过调节电磁阀就可以实现发动机在不同工况下有最佳的供油提前角与之匹配，从而达到改善发动机经济性和动力性并降低废气排放之目的。
A dual-mode scramjet model engine with a rear-faced step is experimentally investigated with different hydrogen fuel injection manners.
在一个有突扩台阶的氢燃料高超声速冲压发动机模型内研究了氢燃料喷注方式对点火与燃烧效果的影响。
Abstract: Designed a one-mode two-cavity injection mold through the analysis of the handle of washing machine.
摘要：通过对塑料洗衣机把手工艺的分析，设计了一副一模两腔的注塑模具。
There are three advantages to produce edible vaccines using strawberry: 1) It changes the inoculation mode from injection to eating strawberry or drinking the juice;
用草莓为载体生产乙肝疫苗有如下特点：（1）改变了传统人类疫苗的接种方式，以口服草莓或草莓汁的途径来接种疫苗；
When the network parameters are kept constant, the results show that the variation of reflection efficiency for PWM mode according to injection power is much less than the am mode's.
研究了匹配网络参数不变时，射频电源不同调制模式对反射率的影响。实验研究表明，脉冲宽度调制模式的稳定度要明显高于振幅调制模式。
It also includes offsetting and switching the position of the chemical injection nozzles (68) for allowing improved deposition in both directions, when operated in a horizontal mode.
它还包括偏离并交换化学物质喷嘴(68)的位置，以便在水平模式中工作时能够实现两个方向上的改进的沉积。
It also includes offsetting and switching the position of the chemical injection nozzles (68) for allowing improved deposition in both directions, when operated in a horizontal mode.
它还包括偏离并交换化学物质喷嘴(68)的位置，以便在水平模式中工作时能够实现两个方向上的改进的沉积。
应用推荐