The influence of the material parameters on the void formation and growth is considered by numerical computation and the results are compared with those for static analysis.
通过数值计算，分析了材料参数和球体的半径比对孔穴生成和增长的影响，并与相应的静态结果进行了比较。
In this paper, based on a series of experimental comparison and analysis, the influence of three dimensional braiding technology parameters on the tensile properties of composites is evaluated.
通过一系列的实验比较和分析研究，客观地评价了三维编织工艺参数对复合材料拉伸性能的影响。
Based on the analysis of self-adaptive fuzzy control and the influence of PID control parameter changes, the rules of fuzzy adjustment of PID parameters in a dynamic process is put forward.
在分析自适应模糊控制及PID参数变化对系统性能影响的基础上，提出在动态过程中对PID参数进行整定。
Based on the analysis of self-adaptive fuzzy control and the influence of PID control parameter changes, the rules of fuzzy adjustment of PID parameters in a dynamic process are put forward.
在分析自适应模糊控制及PID参数变化对系统性能影响的基础上，提出在动态过程中对PID参数进行整定。
A sensitivity analysis for finding the influence of system parameters upon the system production is then offered.
对于系统参数对系统产量的影响做了敏度分析。
The influence of the parameters of the valve on responding speed and flow - dividing accuracy is researched by frequency characteristic analysis method.
采用频率特性分析方法研究了元件参数对分流阀的响应速度和分流精度影响。
Based on the analysis of the characteristic of machined surface profile, the necessity to eliminate errors' influence on the measurement of surface profile parameters was explained.
通过对机械加工表面轮廓特征的分析，说明了在表面轮廓参数测量中，消除各种误差影响的必要性。
From analysis of variance to check the influence that supply parameters of the desk TAC system impress to the task area, the supply air volume is the most significant factor.
通过方差分析送风参数对桌面工位空调送风系统工作区热舒适性的影响，发现送风量是影响工作区热舒适的最显著的因素。
On the basis of analysis of the forming characteristics of rectangular cup, the influence of material parameters on formability under certain forming mode has been studied.
在对模拟成形件进行成形特征分析的基础上，研究了特定成形方式下材料参数对冲压成形性的影响规律。
The article has made in-depth analysis in theory and decided main parameters which influence hops separating quality, such as wind quantity of fans, obliquity and velocity of convey belts and so on.
结合本清选机的清选方式，从理论上进行深入的分析，确定影响酒花分选质量的主要参数：如风机的风量、输送带倾角以及带速的大小等。
By comparison of the influence of some technical parameters on the thickness, along with the executive feasibility analysis, the optimum project for changing the film thickness was obtained.
通过对比几种工艺参数对膜厚的影响及实施的可行性分析，最终得出改变漆膜厚度的最佳方案。
We describe in detail the influence of the main parameters on all the performances in the system through the analysis and calculation of main design parameters of the pump.
这里通过对该泵的一些主要设计参数的分析及计算，详细地阐述了各参数在系统中对各项性能的影响。
The influence of microwave drying parameters on the quality of dried spinach and energy consumption have been analyzed by analysis of range and variance of orthogonal experiment.
采用正交试验的极差分析和方差分析方法，分析了不同干燥参数对干制菠菜品质和能耗的影响。
This paper, by means of theoretical analysis and system simulation, studies the influence of various system parameters on its performanco. and compares it with other ring networks.
与其他环形网相比，其有效传输率较低。本文从理论分析和系统仿真两种方法入手，研究了各种参数对系统性能的影响，并与同类网络进行了对比。
From an analysis of the cycle influencing main parameters it is ascertained that the condensing temperature of secondary cooling medium exercises a very great influence on the cycle efficiency.
对影响循环的主要参数分析表明，二次冷媒的冷凝温度及膨胀机进口压力对循环的效率影响很大。
At the same time, it conducts a sensitivity analysis to the main parameters of GA and model to post their influence to the best solution.
同时也对遗传算法和模型的主要参数进行了灵敏度分析，以进一步揭示它们对最优解的影响。
The influence of arc spraying parameters on the adhesive strength and wear-resistance of JCW-B coating was studied by orthogonal design test and extreme analysis.
采用正交设计方法和通过极差分析研究了电弧喷涂工艺参数对J CW - b涂层结合强度和耐磨性的影响。
Conclusion Multi-slice spiral ct can provide quantitative analysis to renal blood perfusion, but injection flow rate influence the perfusion parameters.
结论多层螺旋CT可对肾脏组织血流灌注进行定量分析，但注射流率影响灌注数值。
The influence of the temperature and material parameters of the composed sphere on the void formation and growth are considered and compared with that for static analysis.
考察了参数对孔穴生成与增长的影响，并与相应的静态结果进行了比较。
The parameter analysis shows that the factors of semi-active control algorithm have great influence on control effect. Obviously, the reasonable parameters are necessary for excellent control effects.
参数分析表明，半主动控制策略的参数对减振效果有显著的影响，合理的参数选择是智能阻尼器取得良好减振效果所必需的。
Through analysis and testified by experiment, this paper shows how the various machining parameters influence the ice-desk polishing precision.
通过分析与实验验证，得出了不同加工参数对冰盘抛光精度带来不同影响的规律。
In this paper, the influence of material parameters on the crashworthiness of thin-walled energy - absorbing components of vehicle body is studied based on numerical analysis.
基于数值分析方法研究了材料参数对车身薄壁吸能构件抗撞性的影响。
This paper constructs several 2d and 3d finite element analysis models with ANSYS, studies the influence of the structure and parameters of BLDCM on vibration mode and natural frequency.
采用有限元分析软件ANSYS建立了BLDCM的二维和三维定子振动的有限元分析模型，研究了BLDCM定子结构和参数对其振动模态和固有频率的影响。
Orthogonal experiment was used to analysis the influence of electrospinning process parameters on PVA/PEO compound nanofibers morphology.
采用正交实验法分析研究了静电纺丝的工艺参数对PVA/PEO共混纳米纤维形态的影响。
This paper, by means of theoretical analysis and system simulation, studies the influence of various system parameters on its performanco. and compares it with other ring net…
本文从理论分析和系统仿真两种方法入手，研究了各种参数对系统性能的影响，并与同类网络进行了对比。
The structural design mainly is from the view of reduce the wave run-up to reduce the roadbed top elevation, analysis the influence of slop cross section structure parameters to wave run-up;
结构设计主要是从减小波浪爬高降低路堤顶面标高的角度出发，分析斜坡断面结构参数对波浪爬高的影响；
Consequently, the analysis of relationship between dynamic parameters and anchor-bar aixal force are performed, and the influence of dynamic parameters on anchor-bar aixal force are concluded.
然后，对锚杆岩土体系统进行了参数影响分析，归纳了模型主要参数对锚杆岩土体系统轴力峰值响应的影响情况。
Consequently, the analysis of relationship between dynamic parameters and anchor-bar aixal force are performed, and the influence of dynamic parameters on anchor-bar aixal force are concluded.
然后，对锚杆岩土体系统进行了参数影响分析，归纳了模型主要参数对锚杆岩土体系统轴力峰值响应的影响情况。
应用推荐