The test results shown that the environment temperature and heat-transfer conditions were the important factors that influence the space application of Stirling cooler.
试验结果表明：温度环境和导热条件是影响斯特林制冷机空间应用的重要因素。
Its CCT curve was determined by test. The influence of quenching and tempering temperature on the mechanical properties was also studied.
试验测定了该钢的CCT曲线，探讨了淬火和回火加热温度对该钢力学性能的影响。
The influence of temperature on impact toughness increases with increase of impulse, and is quite smaller than the influence of impulse in the range of test temperature.
温度对冲击韧度的影响随冲量的增加而加大。在试验温度范围内温度的影响远远小于冲量对冲击韧度的影响。
Through discussion on influence factors of PC box girder temperature field and temperature field features, this paper suggests test method for box girder temperature field in practice.
通过对PC箱梁温度场的影响因素及温场特点的讨论，提出实际工程中箱梁温度场的测试方法。
This paper analyzed the influence of the sample's shape, breadth, thickness, temperature and extension speed on the result of the test when vulcanized rubber's extension performance was tested.
分析在硫化橡胶拉伸应力应变性能试验中试样的形状、宽度、厚度、试验温度以及拉伸速度对试验结果的影响。
The test results showed that the influence of drawing ratio, speed and temperature on the tension, tension fluctuation and irregularity of the fiber were obvious.
结果表明，拉伸比、拉伸速度和拉伸温度对纤维张力、张力波动和不匀率均存在着明显的影响。
Influence is described on engine performance of atmosphere temperature and air compressor characteristic by a serious of matching test between turbocharger and D6114 diesel engine.
通过对涡轮增压器与D6114柴油机的一系列匹配试验与分析，说明环境温度、涡轮增压器压气机性能对发动机整机性能的影响。
The mechanism of trimerization and experiments results are given. The influence of reaction temperature, concentration of reactants, and variation of raw materials on test results is discussed.
叙述了三聚法的原理及实验情况，并讨论了反应温度、物料浓度、原料变化对测试结果的影响。
The test results also indicate that test conditions (temperature, SR number) and the added quantity of catalysts will more or less influence the process of NO reduction.
实验结果还表明，实验工况（温度，SR数）和催化剂的添加量对NO的还原都具有不同程度的影响。
The influence of heat capacity of the electric heater on the transient temperature distribution in the test plate is discussed.
讨论了电加热器热容量对平板试材温度分布的影响。
Test tube bulb of mask lily ROCCO was used to investigate the influence of low temperature, plant hormone, sugar and illumination intensity on the proliferation of the bulb.
以麝香百合ROCCO品种的试管鳞茎为试材，研究低温、植物激素、糖以及培养期间的光照强度等因素对试管鳞茎增殖的影响。
Using the self-built test platform, the influence of the temperature on the transmission spectra of the Thin-Film-Transistor Liquid Crystal Display (TFT-LCD) in visible wavelength is investigated.
本文利用自行搭建的显微光谱测试平台研究了可见光波长范围内温度对薄膜晶体管液晶显示器(TFT - LCD)透射光谱的影响。
The test results show that the resin has advantages of rapid adsorption, little temperature influence and high adsorption capacity and is good for recovering cyanide.
实验结果表明，该树脂具有吸附速度快、受温度影响小、吸附容量大等优点，是一种回收氰化物的优良树脂。
It makes a test about the influence of outdoor dry-bulb temperature, making on split type room air-conditioning energy efficiency.
对室外干球温度对分体式房间空调器能效的影响做了实验测试。
We test the influence of metal temperature and components of the mold upon surface tension of metal.
测定了铁水温度和铸型成分等对铁水表面张力的影响。
A static uniaxial creep test is implemented to investigate the influence of the void ratio and the asphalt-aggregate ratio on the stability at high temperature of modified AC-20I asphalt mixture.
为探讨油石比和空隙率对沥青混合料高温性能的影响，对AC - 20改进型沥青混合料进行单轴静载蠕变试验研究。
Distribution of light intensity, transmittance of fabrics, speed of rotation, temperature and humidity have influence on the test precision.
光强分布、织物透光、旋转速度、温湿度等都会影响测试精度。
One laboratory simulation system test had designed and produced, which was used to study moisture transport mechanism of soil under the influence of temperature.
自制了一套用于研究温度作用下土体水分传输机制的室内试验模拟系统。
According to the test, the welding interlayer temperature of X60 pipeline in the normal and low temperature is analyzed in order to study the influence of its variable range on welding quality.
通过采取焊前预热、控制焊接线能量和层间温度、焊后保温缓冷等工艺措施，并采用相应的检测方法，保证了胺液吸收塔的低温焊接质量。
The influence of pre-heating temperature on organization and performance of X80 pipeline steel was investigated by weld thermal simulation technique and the instrumented Charpy impact toughness test.
采用焊接热模拟技术和显微分析方法，研究了回火焊道热处理对X80级管线钢焊接热影响区韧性的影响规律。
High temperature fatigue creep test of 316l stainless steel under 1-step and 2-step load was conducted, the influence of the load history on material behavior was investigated emphatically.
进行316L不锈钢在单级和两级载荷作用下的高温疲劳蠕变试验，研究了载荷历程效应对材料行为的影响。
The influence of pre-heating temperature on organization and performance of X80 pipeline steel was investigated by weld thermal simulation technique and the instrumented Charpy impact toughness test.
文章分析了自保护药芯焊丝的主要成分及作用，介绍了天津市金桥焊材集团有限公司研制的X80管道钢用自保护药芯焊丝的力学性能试验结果。
The influence of pre-heating temperature on organization and performance of X80 pipeline steel was investigated by weld thermal simulation technique and the instrumented Charpy impact toughness test.
文章分析了自保护药芯焊丝的主要成分及作用，介绍了天津市金桥焊材集团有限公司研制的X80管道钢用自保护药芯焊丝的力学性能试验结果。
应用推荐