The horizontal threads that cross the warp in weaving; weft.
（织品的）纬纱在纺织品中穿过纵向线的水平纱线；
With her work in weaving, she and her sisters managed to make out better.
靠着她织布，她们几个姊妹的境况才有所好转。
Opening should be cleaning in weaving process to reduce weaving broken ends.
织造工序要保持开口清晰，降低织造断头。
Uses: Used in weaving mesh, construction and ACTS as materials in other fields.
用途：用于丝网，建筑行业及民用。
In weaving, lengthwise yarns are called warp and crosswise yarns are called weft, or filling.
纵长方向的纱线叫经纱，横向的叫纬纱。
The weaving performance of yarn is generally expressed in terms of warp breakage rate in weaving.
经纱可织性一般用织造时的经纱断头率来表示。
Feactures of slub stretch denim and its key points in weaving production are introduced in this paper.
介绍竹节弹力牛仔布的风格特征、织造生产实践和技术要点。
Technology points of Richcel Shengma Chitcel mini-jacquard decorative cloth in weaving were discussed.
探讨丽赛棉圣麻康特丝小提花装饰布的织部生产技术要点。
If, however, the yarn is to be used in weaving, it generally must undergo one further operation, slashing.
如果纱线用于机织工艺，一般要进行另一项工作，即浆纱。
Time for a moment, I become old every minute in weaving this relationship has been footprints, unable to go on.
时间片刻变得陈旧，我分分秒秒在编织脚印，这段感情已经无力前行。
Meanwhile, through academic analyse, we explore the realization of the elaborate structure of pattern draft in weaving.
同时，通过织造的理论分析，探索生产实践中如何尽可能的完善分形纹样的精细结构特征问题。
Causes of the four defects in weaving of rapier loom were analyzed and the corresponding prevention measures summed up.
分析了剑杆织机织造坯布时常见的百脚、三跳、纬缩、稀密路四大织疵成因，对此归纳总结出了相应的防治措施。
My father continued in weaving and textile design in NY. My mother focused on secretarial work and raising a large family.
来到纽约后，我父亲继续从事纺织和纺织品设计，母亲改行做了秘书来供养一家人。
Results show that unreasonable designed stitch loops of two fibers of the greige in weaving is the main cause for the formation of holes.
经试验分析发现，织造时坯布的两种纱线线圈长度设计不合理，是造成破洞的主要原因。
The reason and of weft bar existed in weaving cloth on shuttle loom is analysed. The ways and measures to take in practice to reduce weft bar are discussed.
文章论述了有梭织机产生横档的原因、减少横档的方法，以及在实际生产中采取的相应措施。
It is mainly introduced the production technology and appropriate measure in various procedure taken in weaving fine count and high density jacquard fabric.
主要介绍细号高密大提花织物的生产工艺及各工序采取的措施。
There are many methods of drawing-in of lease rods and droppers in weaving plain and twill fabrics on Sakamoto looms. Each method has its own characteristics.
阪本自动织机在制织平纹斜纹织物时，穿绞杆和穿仃经片的方法是很多的，在各种穿法中亦各有自己的特性。
Describes the configuration of various processes in weaving the fabric with interlaced yarn by rapier looms, with discussions made on how to improve the product quality.
介绍了网络丝在剑杆织机上织造各工序工艺配制，并就如何提高产品质量进行了分析。
Based on the features of pure cotton of extra high count fabric, this paper analyses the difficulties in weaving process and puts forward some technical measures in practice.
根据纯棉特高支织物的特点，分析了织造工艺的难点，提出了在生产实践中应采取的技术措施。
In this paper, the composition of the substation expert system, and its application in weaving operation ticket, fault diagnosis, VQC and training online have been introduced.
本文介绍了变电站专家系统的组成以及目前在编制操作票、故障诊断、电压无功控制、在线培训等方面的应用。
In loom design and in weaving production many experts have paid much attention to the shape of warp shed and the distribution of warp line so as to make looms more productive.
在织机设计和织造生产中，人们对梭口形状和经位置线的配置都很重视，意在使织机能很好地完成生产任务。
This paper introduces the processes and technological parameters in weaving high count and high density cotton figured fabric with main technical measures in processing analyzed.
介绍了精梳高支高密纯棉经起花织物的织造工艺流程、各工序的工艺参数配置，并对加工过程中主要技术问题进行了分析。
Machines used in weaving the soft copper wire, aluminum-magnesium alloy wire, stainless steel wire, cotton yarn, fiber coaxial cable, high-speed networks and control of cable knitting.
机器使用于编织软铜丝、铝镁合金丝、不锈钢丝、棉纱、纤维等的同轴电缆、高速网络及控制线缆的编织。
Early opening and later weft insertion were adopted in weaving, adjusting of leno selvage and waste selvage yarn can reduce weaving defects and make weaving efficiency reach above 82%.
织造过程中采用早开口，迟引纬，调整绞边及废边纱穿法，有效解决了织造疵点，使织造效率达到82%以上。
Advanced pure cotton knitting yarn is different from other weaving yarns in weaving process, fabric structure, and fabric styles. The requirements of yarn quality have its own specialty.
由于高档纯棉针织纱在织造工艺、织物结构及织物风格等方面有别于其他机织类用纱，所以对纱线的质量要求有其特殊性。
Arranging opening time, back beam height, tension, opening Angle, drafting, reed-in reasonably were adopted in weaving process. These practice ensures no loop and enhance weaving efficiency.
织造工序要合理设置开口时间、后梁高度、上机张力、开口角度，并合理安排穿综及穿筘工艺，保证了经纱不起圈，且织造效率提高。
This paper analyses the problems in weaving process of pure ramie yarn, discusses the sizing process and brings forward a new one, which improves the sizing quality and the weaving efficiency.
本文分析了纯苎麻纱在织造加工中存在的问题，并针对这些问题提出了改进措施，制定了新的浆纱工艺路线。
The researchful aim of this paper is to establish an effective and practicable forecast model in weaving processing based on BP neural network and the data sets collected from a wool worsted mill.
为了建立毛精纺织造过程的实际预报模型，采用BP神经网络模型和企业所提供的数据，并给出了实验验证。
The researchful aim of this paper is to establish an effective and practicable forecast model in weaving processing based on BP neural network and the data sets collected from a wool worsted mill.
为了建立毛精纺织造过程的实际预报模型，采用BP神经网络模型和企业所提供的数据，并给出了实验验证。
应用推荐