Nun gehen wir in die nächste Phase.
现在我们进入下一个阶段。
Must have 10 years experience in die casting.
必须有10年压铸方面的工作经验。
This article describes the application of high-speed milling in die machining.
本文阐述了高速铣削在模具加工中的应用。
The newly developed method of gating system design for zinc alloy in die casting is introduced.
介绍了锌合金压铸浇注系统设计的最新方法。
We should seek for an optimal combination of technical effect and economical profit in die design.
设计模具应追求技术效果和经济效益的最佳组合。
PU rubber is used as forming part in die. It makes die structure concise.
在模具中应用了聚氨酯橡胶作为成形零件,使得模具结构简单。
Three-axis machines are capable of simultaneous cutting movements in all three dimensional shapes in die and mold cavities.
三轴机床能以冲模和塑模型腔的三维形状同时进行切削加工。
From the view point of casting technology, the necessity of die temperature automatic control in die casting is emphasized.
从铸造工艺角度提出了压铸型温度自动控制的必要性。
In this paper, the techniques about decreasing rebound in die manufacturing are described from the point of structural design.
从弯曲模结构设计角度,阐述了生产中常用减小回弹的方法和技巧。
The results of calculation prove that the flow of coating in conical shaped die can create pressure gradient of coating in die.
通过计算证明,涂料在圆锥形模具中流动时,能够在模具内产生一定的压力梯度。
Recently, the widely applied taper runner in the world is favorable for manufacturing of zinc alloy with high quality in die casting.
目前已在世界上广泛采用的锥形流道有助于生产高品质的锌合金压铸件。
In terms of existing problems in die design, backward reasoning was proposed as solution by analyzing process technique of screw insert part.
通过对螺纹嵌件的工艺分析,针对模具设计中存在的问题,提出了反向推理的解决方法,并有针对性地设计出了弹性接触的模具结构。
High speed WEDM machining had been used widely in die manufacturing industry. Its machining quality directly impacted on die using performance.
快走丝线切割广泛用于冲模制造中,其加工质量直接影响了冲模的使用性能。
Die-flow modeling has also been used successfully to study the stresses occurring at the die exit and to evaluate changes in die-exit geometry.
口模-流动模拟也被成功用于研究口模出口处出现的应力,以及评价口模-出口几何的变化。
In high speed drawing process, the pressure gradient of coating in die determines the magnitude of centering force and the concentricity of coating layers.
高速拉丝过程中,模具中涂料的压力梯度决定了对中作用力和光纤涂层同心度的大小。
The charateristics and the heat treatment process of the steel bonded carbide, measures needing to adopt in die design and machining were briefly introduced.
简要介绍了钢结硬质合金的性能、热处理工艺及在模具设计、加工时采取的措施。
Analyzed factors affected springback in beam bending forming, elaborated how to springback compensation in die design process, introduced the die working process.
分析了横梁压弯成形过程中影响回弹的因素,阐述了在实际模具设计过程中如何进行回弹的补偿,介绍了模具的工作过程。
The structure relation among various components in die casting die assemble and basic working information of the component can be easily obtained using the system.
该系统能方便地得到压铸模装配体中各零部件之间的结构关系以及零部件的基本加工信息。
The state-of-the-art in RP&M and its applications to rapid tooling are described in this paper. RP&M technology has been widely used in die and mold manufacturing.
论述了快速原型技术的最新进展及其在快速模具中的应用,快速原型技术已经广泛应用于模具制造。
Stated the design method of drawing die for the lock catch of outside install door lock, introduced the drawing technology and problems appearing in die testing and solution.
叙述了外装式门锁锁扣拉伸模的设计,着重介绍了拉伸工艺及试模中出现的问题和解决方案。
As styling method of compound curved surface has been widely used in die surface styling, it possesses a very important position in surface styling of motor vehicle body cover panels.
由于混合曲面的造型方法在模具表面的造型中广泛采用,从而使混合曲面的造型方法在汽车覆盖件表面造型中占有很重要的地位。
Specific analysis of developing prospect and application of clutch type spiral press with heavy duty (25mn or more) has been done to promote application spread in die forging process.
针对大吨位离合器式螺旋压力机(主要指吨位在25MN以上的压力机)的开发前景及应用情况,作出了一些具体分析,以推动该类设备在模锻工艺上的广泛应用。
The roles of alloying and trace elements in die-casting al, Mg, Zn and Zn-Al alloy and its research progress were surveyed. The problems in further developing die-cast alloy were analyzed.
叙述了合金元素和微量元素在压铸铝合金、镁合金、锌和锌铝合金中的作用及近年来取得的研究进展,分析了压铸合金有待进一步研究开发的问题。
The third strength theory and optimization design theory were used to design cylinder body in die-shelf. Theoretical direction was offered about the optimization design parameters of cylinder body.
在该模架液压缸缸体设计中引入第三强度理论和优化设计理论,为缸体结构参数的优化选取提供理论指导。
The nanotechnology and the properties and application of nanomaterials were introduced. The application prospect of nanotechnology and nanomaterials in die and mould manufacturing was also described.
为了更好地推动纳米材料的应用,介绍了纳米技术及纳米材料的性能、用途,并就纳米技术、纳米材料在模具工业中的应用前景进行了展望。
The paper introduces how to make advantage of multi-media technology in die design course teaching thus to solve the problems in the teaching. It also explores the teaching method of the multi-media.
文章介绍了在“模具设计”课程中合理地利用多媒体技术,解决教学中存在的问题,并对多媒体教学方法进行了探讨。
In die design, the pressure center of stamping die is calculated generally using analytic method or schematic method.
在模具设计中,冲裁模压力中心通常采用解析法或图解法求解。
In die design, the blanking pressure center of stamping die is calculated generally using analytic method or schematic method.
在模具设计中,冲裁模压力中心通常采用解析法或图解法求解。
In die design, the blanking pressure center of stamping die is calculated generally using analytic method or schematic method.
在模具设计中,冲裁模压力中心通常采用解析法或图解法求解。
应用推荐