Colloquialism fOR recORder OR printout device in control system.
在控制系统中记录器或打印输出设备的统称。
PLC is applicable in control system to improve the control accuracy and automation.
控制系统采用PLC控制，提高了控制精度和整体的自动化程度；
The application of repetitive control technology in control system of linear DC servomotor is presented.
介绍了重复控制技术在直流直线伺服电机控制系统中的应用。
In this paper, an optimal reduction technique and its applications in control system design are described.
本文给出一种新的控制系统最优降阶技术并介绍其在控制系统设计中的应用。
Mathematical model of soft cut-in control system was analyzed, and the optimum control model also is established.
分析软并网控制系统的数学模型，建立软并网控制器最优控制数学模型。
In control system, system identification and control are calculated by high speed digital signal processing board.
实时控制中，辨识和控制的计算都由高速数字信号处理器完成。
Fieldbus technology is used in control system, the communication protocol and control flow is discussed in detail.
控制系统采用现场总线技术，文章详细阐述了系统的通讯协议和控制流程。
As a new type of mechanical and electrical products, magnetic particle clutch (MPC) is used widely in control system.
磁粉离合器作为一种新型机电产品，在控制系统中的应用越来越广泛。
This paper introduces method of shield earth, and discusses shield earths application and selection in control system.
介绍了控制系统中屏蔽接地的方式，并对屏蔽接地方式在控制系统中的应用和选用进行了讨论。
A design and application of industrial control PC computer in control system for an automation green house is introduced.
论述了采用工业PC计算机实现自动化温室控制系统的设计与应用。
This paper introduces the application study of touching screen and PLC in control system of the pulsant vacuum sterilizer.
介绍触摸屏和PLC在脉动真空灭菌器控制系统中的应用研究。
With DSP increasing of operating speed and falling of price, its application is more and more widespread in control system.
随着DSP运算速度的提高和价格的下降，DSP在控制系统中应用越来越广泛。
EMS is a critical technology of fuel economy improvement for HEVs. It is essential in control system of the hybrid powertrain.
能量管理策略是混合动力汽车节能技术的关键，它是混合动力控制系统的核心。
Because of large numbers of acquisition points and short time period in control system, the amount of historical data is very large.
但由于控制现场的采集点多，采集时间周期短，因而要保存的历史数据量非常大。
Hard real-time tasks of control systems are analyzed, and all kinds of hard real-time tasks that include in control system are pointed out.
文章通过对控制系统中强实时任务进行分析，指出系统存在的各类强实时任务。
A method for fault detection and identification in control system under external disturbance and variations of plant parameters is presented.
提出了一种在模型参数变动和存在外部扰动条件下的控制系统故障检测与识别方法。
The application of CAN bus in control system of the hydraulic pressure colligation test-bed to measure and control the parameters was studied.
将CAN总线应用于液压综合试验台控制系统中各参数量的检测与控制。
Another, Off-line Simulation is supplement of self_learning and adaptive in control system, it is propitious to optimization of control system.
另外一个方面，离线仿真也是对控制系统的自适应和自学习的一个有益的补充，有利于控制系统的优化。
FWM researched in this thesis is the primary equipment that manufactures fiber production, and the controller is core in control system of this equipment.
本课题所研究的纤维缠绕机就是生产纤维缠绕制品的主要设备，控制器便是该设备控制系统的核心。
A new method of optimisation design for the correction element in control system is stated by combining the conjugate gradient method and using MATLAB software.
结合共轭梯度法，借助于MATLAB软件，提出一种控制系统校正环节优化设计的新方法。
The new method of optimisation design for the regulator in control system is stated on the optimum seeking technology of parameters by using the simplex method.
利用单纯形法的参数寻优技术，提出一种控制系统调节器优化设计的新方法。
Purpose, application and skill in control system transformed from conventional banked relay to PLC control system on Model Z8640 hot box core shooter have been introduced.
介绍Z8640双工位四开模热芯盒射芯机常规继电器线路控制系统整改为可编程序控制器（PLC）控制系统的目的、应用和技巧。
In this paper, the features of MC68HC11G5 microcontroller and the use in control system of automatic door are introduced, described emphatically the design of its hardware.
文中介绍MC 68hc11 G 5单片机的特性及其在自动门控制系统中的应用，重点阐述系统的硬件设计。
This paper introduces the development of testing system used for automobile electrical parts, application of PLC and offers a sub-programming design plan in control system.
介绍了汽车电器件试验系统的研制开发思路，以及PLC在汽车电器件试验系统中的应用，并给出了控制系统子程序的设计方案。
Brought forward some material measure about energy saving in control system and diffused aeration system combining the characteristic of MSBR technics in wastewater treatment.
结合MSBR的工艺特点，提出了污水处理过程在控制系统和曝气系统中的一些具体节能措施。
Results showed that the reliability of system was strengthened after reformation, and operation condition is good. And the practical Problems in control system could be solved.
结果表明：系统的可靠性增强，运行状况很好，解决了原生产操作中的问题。
As a synthesis method in control system, the sliding mode of variable structure control is invariable, and which is its most excellent advantage in the missile attitude control system.
变结构控制作为控制系统的一种综合方法，它的滑动模态具有不变性，这是变结构控制在导弹姿态控制中最突出的优点。
Optical fiber technology is used in missile control system, which can resolve the electromagnetic interfere, the electric isolation, anti-jamming and so on in control system effectively.
光纤技术用于导弹控制系统中，有效解决了控制系统的电磁兼容、电气隔离、抗干扰等问题，大大提高了导弹控制系统的性能与可靠性。
Since the real time task sets in control system consist of hard real time periodic tasks and soft real time period tasks, the dual priority algorithm is adopted for scheduling these tasks.
根据控制系统中存在强实时周期任务和软实时周期任务的特点，采用双优先级算法进行任务调度。
For the sake of high performance technique index sign and multi-function from examining the trouble, it adopts double - CPU in control system and double-pole type PWM in the power circuit.
为了达到系统高性能的技术指标和多功能的自诊断目的，在控制系统中采用了双cpu，主电路采用了双极式可逆pwm变换器。
应用推荐