The results show that after post-weld heat treatment(PWHT), the welds of X80 steel seriously embrittle, and the fracture morphology of impact specimens is cleavage.
结果表明，经过焊后热处理后焊缝出现严重的低温脆化，其冲击试样的断口为解理状形貌；
The impact test of the pendulum is used to strike the notched specimens of the cantilever beam with a prescribed height, and the test of impact absorbing power when the specimen is broken.
艾氏冲击试验：用规定高度的摆锤对处于悬臂梁状态的缺口试样进行一次性打击，测量试样折断时冲击吸收功的试验。
Charpy impact test (V gap) : the specified height of pendulum of the one-time blow to V notched specimens in beam state, test specimen is broken by the impact absorbing energy.
夏比(V型缺口)冲击试验：用规定高度的摆锤对处于简支梁状态的V型缺口试样进行一次性打击，测量试样折断时冲击吸收功的试验。
This test piece shall be welded using the identical welding parameters as the original test and only weld metal impact test specimens shall be tested.
此试件应使用与原始试验相同的焊接参数进行焊接，并且仅对焊接金属冲击试样进行试验。
Gravel multi-function impact test enginery main standard components are: shot gun components, collision chamber and specimens grippers.
砂砾多功能冲击试验机主要的标准组件有：射枪组件、碰撞室和试件夹持器。
The deformation behavior and shear localization in truncated conic specimens of tungsten heavy alloys under impact loading are simulated by the finite element code ABAQUS.
采用有限元计算编码abaqus模拟了钨合金圆台试件在冲击载荷下的变形和剪切局部化行为。
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
比较两种材料试样在一定时间内的失重变化情况，表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
Gravel multi-function impact test function of rapid specimens of loading and unloading and equipped with external extended grit boxes, convenient and practical.
砂砾多功能冲击试验机能快速进行试件的装卸并配有外置式的砂砾收集箱，方便实用。
Environmental testing for electric and electronic products. Part 2: test method. Mounting of specimens for vibration, impact and similar dynamic tests.
电工电子产品环境试验。第2部分：试验方法。振动、冲击和类似动力学试验样品的安装。
The falling-ball impact wear tester designed by ourselves was used to investigate the microstructural changes in specimens tested under the condition similar to that of ball mills.
利用自行研制的落球冲击磨损实验装置，在模拟球磨机的工矿条件下，研究了冲击磨损后样品的组织结构变化。
The specimens with Widmanstatten structure have higher impact strength and lower ductile-brittle transition temperature than those with equiaxial granular ferrite structure.
有魏氏组织的试样较呈等轴铁素体的试样有更高的冲击韧性和更低的韧脆转变温度。
When biological cells or tissue thick specimens are imaged by bio-optical microscopy, image resolution decreased significantly due to the impact of diffraction and defocus.
生物光学显微镜对生物细胞(组织)厚样本成像时，由于受衍射和散焦成份的共同影响，成像分辨率明显下降。
By changing the nolch local ion of Charpy impact test specimens studied the effect of nolch location on toughness and cracking process in multi-layer welds.
通过改变焊缝夏比冲击试样的缺口取向，研究了缺口位向对多层焊缝金属韧性及断裂过程的影响。
The tensile and impact properties of the specimens were measured at room temperature.
室温下测量了试样的拉伸和冲击性能。
All studies show that weak plane inclination, thickness and whether be run through or not have a significant impact on longitudinal wave velocity, average modulus and strength of specimens.
研究结果表明：弱面的倾角、厚度及是否贯通等对试样的纵波速度、平均模量和强度具有显著的影响。
All data is from injection molded specimens with the exception of Drop Weight Impact.
所有数据是从注射成型用的落锤冲击异常标本。
The CEAST 9000 Series is designed for measuring the impact performance of raw material specimens and finished components.
摆锤冲击试验机可以进行夏比，伊佐德冲击，用于研发，金属，聚合物，复合材料和成品的检测。
The CEAST 9000 Series is designed for measuring the impact performance of raw material specimens and finished components.
摆锤冲击试验机可以进行夏比，伊佐德冲击，用于研发，金属，聚合物，复合材料和成品的检测。
应用推荐