Simulate and validate ignition process of some experimental motor.
模拟验证了某实验发动机点火试验。
The result is that the ignition process is faster, more homogeneous and more acoustically refined.
其结果是，点火过程更快，更均匀，更听觉完善。
The vacuum arc ignition process, the plasma diffusing and the axial magnetic field effect are also analyzed.
分析了真空电弧的引燃过程和起弧后等离子体的扩散过程以及纵向磁场对等离子体扩散的影响。
The electromagnetic filed influence the ignition process on that: pulverized coal particles as semiconductor;
交变电磁场是针对煤粉气流在着火过程中有关特征发生变化：煤粉颗粒的半导电性；
The results show that the internal hot EGR has remarkable effect on DME ignition process with HCCI combustion.
研究结果表明：内部热EGR对DME的HCCI着火过程有着显著影响。
This ignitor can be used for simulation of sinter ignition and after-heating, and some special ignition process.
可用于模拟烧结点火、保温过程和一些特殊的点火工艺过程。
The experiment shows that the system has realized the real time test of ignition process with high reliability and accuracy.
实验表明该系统能实现对点火性能参数的准确、可靠、高精度的实时测试。
It is much easier to detonate a mixture of air and fuel if it is highly compressed prior to (or during) the ignition process.
这是非常容易引爆的空气和燃料如果是高度压缩之前(或期间)点火过程的混合物。
The results show that: the ignition process is influenced both by the electromagnetic filed and the wall with high temperature;
研究表明：煤粉气流在感应式加热无油直接点火器中的着火过程，是交变电磁场与高温壁面加热协同作用的结果。
It is considered that the propagating process can be regarded as the ignition process occurring layer by layer inside the column sample;
认为燃烧合成的自动蔓延过程是样品中一层一层的逐层点火过程，因此，点火公式也可以用来解释自蔓延高温合成过程本身。
The paper analyzes the ignition process of the boiling furnace in toasting theory with sulfur and iron ore and introduces mended ignition way.
本文用硫铁矿焙烧理论分析了沸腾炉的点火过程并介绍了改进后的点火方法。
In arc ignition process, it has apparent effect and improves the stability of arc, so that power factor is advanced and current drain is reduced.
在引弧过程中，有明显的效果，提高了电弧的稳定性，从而使功率因数是先进的，漏电流减少。
A one-dimensional mathematical model for the ignition process in spark-ignition engines was proposed on the basis of the thermal theory of ignition.
本文以着火的热理论为基础，提出了一个火花点火式发动机点火过程的一维数学模型。
The H2O2 flow has decisive effect on ignition process, and the motor cann't be ignited when the oxidizer flow rate is less than the minimum ignition flow rate.
H2O2的流量对点火过程起决定性作用，当氧化剂流量低于最小点火流量时，发动机将无法点火。
Pulverized coal stream ignition process in a new type of no oil ignition aid burner, which using the method of electromagnetic induction, has been investigated.
详细研究了在感应式无油直接点火燃烧器点火室中，煤粉气流在着火过程中的机理。
This paper presents an analysis of the characteristics and laws of formation of pressure waves in guns, based on the ignition process and propellant bed structure.
本文根据点火过程和药床结构，分析膛内压力波形成的特征及其规律。
Thermal ignition temperature was defined, the thermal ignition process of electric hot wire initiating devices was divided as calefactive phase and explosion phase.
定义了热点火温度，将桥丝式电火工品的热点火过程分为升温阶段和爆炸阶段。
In this paper, is developed a physical model with the ignition process taken into account, for the internal ballistics calculation of solid propellant rocket motors.
本文根据提出的考虑点火过程的内弹道计算的物理模型，建立了数学方程。
The ignition process of combustible gas stream by a heated plate in the laminar boundary layer was analytically considered and the limits of ignition were determined.
以此分析了炽热平板层流边界层内可燃气流的引燃，给出了描述引燃的着火临界条件。
The high speed photography was applied to visualize the fuel spray and ignition process in main and prechamber in a swirl type diesel engine at cold starting condition.
本文对涡流室式柴油机在冷起动条件下主、副燃烧室内燃油喷雾和着火过程进行了高速摄影。
Optical computerized tomography and multimedia technique of computer were used to visualize and analyze the ignition process of energetic droplet LP1846 under atmospheric pressure.
应用光学层析和计算机多媒体技术研究了含能液滴l P 1846在大气压下的着火过程。
The discrete time mathematical model of a switched TIG welding power source is established. The arc ignition process, its property, current wave form and arc stability are analysed.
本文建立了开关式TIG焊电源的离散时域数学模型，分析了电弧引燃过程、引弧性能、电流波形特点和电弧稳定性。
One necessary step was the invention of a device that would be capable of assembling the fusion targets that will become the miniature SUNS on Earth during the fusion ignition process.
一个必要的步骤是将一个设备的组装融合的目标，将成为在地球上的聚变点火的过程能发明的微型太阳。
The design principle and circuit construction and program process of apparatus of the best ignition angle for motorcycle engine are introduced.
介绍了一种摩托车发动机最佳点火角试验仪的设计原理、电路结构和程序流程。
This dissertation integrates theoretical analysis and numerical simulation method to investigate the ignition transient process of large aspect ratio solid rocket motors.
本文采用理论分析和数值仿真方法对大长径比固体火箭发动机点火瞬态过程进行了系统研究。
Sintering process is started from ignition, and bad or good the ignition operation is, influences not only on output and quality of sintering, but also directly on energy consumption.
烧结过程是从点火开始的。 点火过程进行得如何，不仅影响烧结生产的产量与质量，而且对能源的消耗有直接影响。
Based on minimal fuel principle, the switching curve of ignition is confirmed by using optimization theory, and a braking scheme is designed for the process of the lunar probe vertical soft landing.
针对月球探测器垂直软着陆过程，基于耗燃最优的原则，利用最优化理论确定了点火切换曲线。设计出一种制动方案。
Through analyzing the process, this paper proposed a basic design method of the ignition coil (inductance coil). It also gave some ways for measuring the work-efficiency of the ignition coil.
本文通过分析这个过程，给出了适合这种工作的点火线圈(即电感线圈)的基本设计方法，同时还提供了测试点火线圈工作效率的方法和手段。
Through analyzing the process, this paper proposed a basic design method of the ignition coil (inductance coil). It also gave some ways for measuring the work-efficiency of the ignition coil.
本文通过分析这个过程，给出了适合这种工作的点火线圈(即电感线圈)的基本设计方法，同时还提供了测试点火线圈工作效率的方法和手段。
应用推荐