A significant part of the development of a feedback and control system is the identification of the measures and metrics that need to be identified and collected.
反馈及控制系统的一个重要开发部分是，确定需要识别并收集的测量及量度。
By means of gear profile statistics to conduct the identification of gear manufacturing process system, a scientific and easy-operation method to assess and control gear quality is provided.
采用齿廓统计分析方法对加工工艺系统进行识别，可为齿轮质量的评定与控制提供更科学且易于操作的手段。
The results can be used to control the motion of magnetic suspended system directly on some occasion, and provide the precondition for more accurate identification on line also.
辨识的结果可直接用于某些场合下磁悬浮系统的运动控制，也可以在此基础上进行更为精确的在线辨识。
The building of discrete state-space models including system noise provides a basis for the exact identification and effective control.
这种包含系统噪声的离散状态空间模型的建立，为网络化控制系统的准确辨识和有效控制奠定了基础。
Detection, identification, and selection of moving target through image sequence are very important to Air Traffic Control System and Air Defense System.
利用图象序列来检测、识别和选择运动飞机目标，对于诸如航空管制和防空系统有着十分重要的意义。
A method for fault detection and identification in control system under external disturbance and variations of plant parameters is presented.
提出了一种在模型参数变动和存在外部扰动条件下的控制系统故障检测与识别方法。
Simulation results show that this identification method has excellent approximation ability, and system of adaptive inverse control has good robustness and performance.
仿真结果表明，该辨识方法具有良好的逼近能力且自适应逆控制系统具有良好的鲁棒性。
Traditional PI controllers do not have PI on-line parameter identification function, which makes the system can not reach the best control.
传统的PI控制器不具备参数在线辨识功能，这使得系统的性能达不到最优的控制。
Important function is played by identification of engine no-load mode in simulation of power transmission system, starting and automatic shifting control of motor vehicle.
发动机空载工况的辨识在车辆动力传动系统仿真和车辆的起步、换档自动控制中起着重要的作用。
The research of fuzzy system identification is very important for achieving satisfactory performance of fuzzy control in both theory and application aspects.
为了实现理想的模糊控制，基于对象的模糊系统辨识研究具有非常重要的理论与实际应用价值。
This article introduced emphatically the control strategy, position detection and identification, drive technique as well as main circuit of permanent magnet Ac servo system.
重点介绍了永磁交流伺服系统的控制策略，位置检测和辨识、主电路和驱动技术等关键技术。
From the linearization procedure, a new approach of system identification that is on-line real time modeling and real time feedback control correction can be found.
但研究发现，在这种线性化过程中，包含了一种新的系统辨识思想，那就是在线实时建模一实时反馈控制校正的思想。
The identification of transfer function can facilitate the design of a digital compensator to get rid of manual debugging and provide complex digital compensator for a high performance control system.
传递函数辨识方法摆脱了数字补偿器设计依赖手工调试的状况，并可以提供复杂的数字补偿器以得到高性能的控制系统。
A synthesis method based on inverse dynamics and online parameter identification was developed and was directly used to design the attitude controller in the integrated control system.
提出了一种基于逆动力学和在线参数辨识的方法，用于直接设计综合控制系统中的姿态控制器。
This model, as a part of the overall design of control system, shall be the base of on-line identification and process optimization in the future.
该模型为控制系统总体设计的一个部分，是下一步进行模型在线识别、寻优的基础。
Based on the sensitivity of neural network of system identification, a method of descending neural network sensitivity in control systems is proposed in this paper.
基于系统辨识的神经网络灵敏度，提出了降低用于控制系统中神经网络灵敏度的一种方法。
The control system consists of a TMS320C30 data signal processing board, which is to calculate the identification and control algorithm, and a multi channel data acquisition board.
控制系统由TMS320C 30数字信号处理器和多通道数据采集卡构成，辨识与控制方法由TMS320C 30数字信号处理器实现。
Synchronization and parameters identification of uncertain different-structural chaotic system via active control is researched.
研究了基于主动控制的不确定异构系统之间的同步和参数辨识问题。
System identification is an important branch of control theory study, and it is also the foundation of control system design.
系统辨识是控制理论研究的一个重要分支，它是控制系统设计的基础。
In addition, the identification of the important parameter and switch mode techniques are effectively used in the HIFU control system.
另外，重要参量辨识和开关模式控制技术是十分有效的控制方法。
Aiming at the problem of difficult system identification modeling for control system, an identification modeling system was designed for control system by using support vector regression (SVR).
针对非线性控制系统辨识建模较为困难的问题，利用回归型支持向量机(SVR)设计了一例控制系统的辨识建模系统。
In this paper, one kind of music fountain intelligent control system based on music characteristic identification is introduced.
介绍一种基于音乐特征识别的音乐喷泉智能控制系统。
Use is made of a quasi-randon coherence function computer to carry out on-line identification for a typical chydroelectric servo position control system.
利用伪随机相关仪对电液系统进行在线辨识已有成功先例。
Fuzzy system identification and control is an important branch of the identification and control of general nonlinear system that is a complex research field.
非线性系统辨识和控制是一个复杂而又非常重要的研究领域，其中模糊系统辨识及其控制研究是一个重要的分枝。
A study on the control strategy for vehicle impact identification of occupant restraint system is conducted.
对乘员约束系统进行碰撞工况识别的控制策略研究。
Dialock identification and locking system is a electronic control system which uses transponder technology as its core.
对话锁识别系统和锁系统是以发射机应答器技术为核心内容的电子控制系统。
An online adaptive fuzzy neural network identification and robust control approach were proposed for the adaptive control problem of SISO nonlinear system.
针对单输入单输出非线性系统的自适应控制问题，提出了一种在线自适应模糊神经网络辨识与鲁棒控制的方法。
This method is a control-relevant identification method, and it could get better results as compared with the existing system identification methods.
这种方法是与控制相关的一种辨识方法，能获得比普通的系统辨识方法更好的结果。
This method is a control-relevant identification method, and it could get better results as compared with the existing system identification methods.
这种方法是与控制相关的一种辨识方法，能获得比普通的系统辨识方法更好的结果。
应用推荐