• In the hydraulic drive machines, the key to good power, acceleration and economy is the proper and rational matching of power source with the hydraulic torque converter.

    在液力传动机械中,将动力源与液力变矩器进行正确而合理的匹配,是使其获得良好的动力性、加速性和经济性的关键。

    youdao

  • Testing equipment: hydraulic torque tester, speed device, spin Boom.

    检测设备:油压扭力测试仪、转速仪、旋臂架。

    youdao

  • The structure, working principle and features of the hydraulic torque converter are introduced.

    阐述了该液力变矩器的结构、工作原理及特点。

    youdao

  • The theoretic foundation is offered to the design of executing mechanism of hydraulic torque wrench.

    为液压扭矩扳手执行机构的设计提供了理论依据。

    youdao

  • In this dissertation we will study the interval flow of hydraulic torque converter with UG and ANSYS software.

    本文在UG和ANSYS软件的基础上对液力变矩器的内部流场进行研究。

    youdao

  • The obtained results were verified by their comparison with the baseline, W305 type hydraulic torque conveter.

    同时,通过与作为基型的W305型液力变矩器的比较,证明了研究结论的可靠性。

    youdao

  • The magnitude of deformation affects the performance of hydraulic torque converter and its connection with adjacent parts.

    其变形的大小将直接影响到液力变矩器的性能和在工作中与相邻零部件间的位置关系。

    youdao

  • This method has been for many times used for date-processing in tests of hydraulic torque converter and proved to be useful and effective.

    这一方法曾多次应用于液力变矩器试验数据的处理过程,证明是可行而有效的。

    youdao

  • The results show that the algorithm is simple and reliable, it can be used to study the internal properties of hydraulic torque converters.

    结果说明,本文提出的算法简单可靠,可供研究液力变矩器内特性时应用。

    youdao

  • In view of saving energy and enhancing transmission efficiency, a new PLC and HMI based shift control to 4d180 hydraulic torque converter is proposed.

    从提高传动效率和节能的角度出发,提出用PLC(可编程序控制器)和HMI(人机界面)控制电液自动变速器(4d180型)的全新控制方案。

    youdao

  • The characteristics and match relations of diesel and hydraulic torque converter are analyzed. Various factors on common working points are introduced.

    分析了工程机械液力变矩器与柴油机的工作特性、匹配关系,对影响其共同工作点的各种因素进行了详细介绍。

    youdao

  • Calculation simulation is conducted with model LB46 hydraulic torque converter as a basic model and output characteristics of the partially filled converter are obtained.

    采用LB46型液力变矩器为基型作计算仿真,得出了液力变矩器部分充液输出特性。

    youdao

  • A photoelectric non-contact 3d scanner was used when measuring the turbine wheels and blades in hydraulic torque converter. 3d models of turbine wheels and blades are set up.

    采用光电非接触三坐标扫描测量仪测量了液力变矩器叶轮和叶片,并建立了叶轮和叶片的三维模型。

    youdao

  • In the three-dimensional numerical calculations based on sheet metal hydraulic torque converter of the axial force, deformation theory, reliability and fatigue life were studied.

    在三维流场数值计算的基础上对钣金型液力变矩器的轴向力、变形理论、疲劳寿命进行了研究。

    youdao

  • This paper introduces the transmission characteristic of a hydraulic torque converter, analyses the basic performance parameters for describing a converter and their mutual relationship.

    本文介绍了液力变矩器的传动特点,分析了评价变矩器的基本性能参数及参数间的相互关系。

    youdao

  • In the light of the problem of excessive fuel consumption in hydraulic torque converter drive of mechanical drilling RIGS, experiments on the hydraulic coupling transmission are conducted.

    针对机械驱动钻机液力变矩器传动消耗燃油多的问题,开展了液力偶合器传动的试验。

    youdao

  • This paper describes the design features of a test bed for diesel engine combined with hydraulic torque converter and represents the test specifications and the processing of measured data.

    本文介绍一种柴油机-液力变矩器联合试车装置的结构特点、试车规范及测试数据的计算。

    youdao

  • This paper Outlines the features and application of hydraulic torque converters, describes in detail its daily maintenance, and lists the common faults' causes and handling methods in a table.

    简述液力变矩器的特点及应用,详细介绍其日常保养维护,并列表给出常见故障原因及排除方法。

    youdao

  • Under the operation load, the hydraulic torque converter could be regarded as a rotating pressure vessel. It will dilate like a balloon as a result of the centrifugal force and fluid pressure.

    液力变矩器在工作载荷下,同时受到油压的面力和旋转所产生的离心力作用而发生变形。

    youdao

  • Based on the practical situations of current construction equipment maintenance, the fault of master clutch, hydraulic torque converter, driving bridge, steering clutch and brake are discussed.

    结合当前工程机械维修工作的实际情况,对主离合器、液力变矩器、驱动桥、转向离合器和转向制动器等部位的故障现象进行了深入的探讨。

    youdao

  • Hydraulic torque and energy terms associated with rotation, including heating and shaft power effects appropriate for higher rotation speeds.

    与旋转有关的水力矩和能量项模拟,包括高转速下应考虑的加热效应和叶片功效应。

    youdao

  • This paper introduced the design of a TIG welding machine, which is used for six PTP(point to point) assembling welding of the Hydraulic Torque Converter.

    介绍了一种用于液力变矩器总成焊接的六点TIG焊专机控制系统。

    youdao

  • The author works out in this article a repair process for the mechanical seals on CHC-750 Hydraulic Torque Converter through failure analysis of the seals.

    本文分析了CHC—750型液力变矩器机械密封装置的失效原因,制订了修理工艺。

    youdao

  • The author works out in this article a repair process for the mechanical seals on CHC-750 Hydraulic Torque Converter through failure analysis of the seals.

    本文分析了CHC—750型液力变矩器机械密封装置的失效原因,制订了修理工艺。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定