Applying the model in the simulation of Hydraulic turbine Governing system, the change rules of both the system and the turbine's internal parameters can be found rapidly and accurately.
将该模型应用于水轮机调节系统仿真，能快速准确地得到系统及机组内部各参数的变化规律。
In this paper four model following approaches are used to design Hydraulic Velocity Flight Simulation Table with One Axis.
本文讨论了将模型跟踪综合技术用于单轴液压速度转台综合设计的四种方法。
According to the feature of hydraulic servo system, the PDF control strategy is proposed, and simulation test is done based on the setup of control system model.
根据其液压伺服系统特点提出了P DF控制策略，并在建立控制系统模型的基础上进行了仿真试验。
Mathematical model and control law of the digital electro hydraulic proportion system are put forward. Furthermore, computing simulation and experimental verification are carried out.
提出了数字电液比例系统的数学模型及控制规律，并进行了计算机仿真及实验验证。
The whole ABS models are established for the simulation requirement, including tire-road model, vehicle dynamic model, brake disk model, hydraulic system model and the controller model.
针对ABS仿真计算的需要，对整个防抱系统进行了建模，包括轮胎模型、车辆模型、制动器模型、液压系统模型和控制器模型；
The hydraulic characteristics of the throttled surge chamber under various hydraulic transition processes are analyzed through combination of numerical simulation and model test.
通过带调压室水电站的模型试验和数值仿真计算，分析了阻抗式调压室在各种水力过渡过程下的水力工作特性。
The technology can be applied in creating components model base in the general simulation system of the mechanism, electron, hydraulic pressure, and has high friendliness.
该技术在机电液通用仿真系统的元件模型库创建中得到应用，友善性良好。
In this paper, the principle of variable speed pump control hydraulic differential cylinder is designed, and the simulation model of system is built, and the simulation research is carried out.
给出了采用变转速泵控闭式回路控制差动缸的原理，建立了该系统的数学模型，进行了计算机数字仿真研究。
On the basis of mathematical model of solid-fluid mass transfer coupling in the process of hydraulic fracture and solution of rock salt, the corresponding numerical simulation is carried out.
在建立岩盐水压致裂溶解过程的固流传质耦合数学模型的基础上，对该过程进行了数值模拟。
Calculation simulation is conducted with model LB46 hydraulic torque converter as a basic model and output characteristics of the partially filled converter are obtained.
采用LB46型液力变矩器为基型作计算仿真，得出了液力变矩器部分充液输出特性。
The results of simulation show that mathematical model of neural networks of electro-hydraulic servo control system has better precision and the algorithm has ability to approximate error of global.
仿真结果辨明：神经网络描述的电液伺服控制系统数学模型具有较高精度，算法全局逼近能力良好。
An introduction of a 16 channels electro-hydraulic servo control wave maker constructed in a ship model testing towing tunk. the sea wave simulation method and it's computer control.
介绍一个建于船模试验拖曳水池中的直推式16摇板电液伺服控制造波机和波浪模拟方法及其计算机控制。
The supply yield of groundwater resource system in Shijiazhuang has been calculated by the numerical simulation model and the hydraulic optimal model of the groundwater system.
利用地下水资源系统的数值模型和水力管理模型对石家庄市地下水资源系统的供水能力进行了评价；
The mathematical model is established for the multi-objective hydraulic optimizations of the diversion components of hydraulic turbines, and the computer simulation is carried out.
本文建立了水轮机引水部件多目标水力优化的数学模型，并进行了计算机数字仿真。
The simulation test results show that the three-parameter Weibull distribution model of front-wheel swerve shimmy damper hydraulic booster is more accurate than the two-parameter Weibull distribution.
仿真试验结果表明，前轮转弯减摆助力器的三参数威布尔分布模型比两参数威布尔分布模型更为精确。
By applying the hydraulic model, the self-simulation solution of the spherical charge blasting at the close zone has been obtained.
本文利用流体动力学模型，得到球对称装药爆破近区的自模拟解。
The FE model for the underground LHD machine's bodywork structure was built and the simulation methods for its joint, hydraulic actuator, tyre and boundary conditions were proposed.
建立了地下铲运机整机结构有限元模型，提出铰销、油缸、轮胎及边界条件的模拟方法。
The results of the study show that to use micro-computer is a very ideal and reliable method for dynamic test, model identification, digital simulation and aided debugging of the electro-hydraulic$…
实践表明，用微机对电液控制系统的动态测试、模型辨识、数字仿真以及辅助调试是一种理想、可靠的方法。
In the research of water hydraulic technology, flow field simulation is done by the method of Fluid-Solid coupling, leading to the pressure nephogram and velocity vector of the pump model.
在水压技术理论研究方面，应用流固耦合理论对水压齿轮泵进行了二维流场的仿真分析，得出了其流场压力云图和速度矢量图。
The leakage characteristic of the rebound valve can be established by building the simulation model in the process of designing this kind of hydraulic system, according tow…
通过建模、仿真分析，可以在设计这种保压系统过程中，较好地确定单向阀的泄漏特性，为选用元件提供依据。
The dynamic simulation model of hydraulic system for width control of rough rolling was established based on the Bao Steel 2050 rolling mill.
通过对国内某钢厂热连轧带钢粗轧过程设定计算控制系统的分析 ，阐明了系统设定计算模型的结构及控制原理。
The dynamic simulation model of hydraulic system for width control of rough rolling was established based on the Bao Steel 2050 rolling mill.
通过对国内某钢厂热连轧带钢粗轧过程设定计算控制系统的分析 ，阐明了系统设定计算模型的结构及控制原理。
应用推荐