Conventional plasma torches employ such hot plasma to cut metal.
传统的等离子枪使用此热等离子体切割金属。
As the black hole devours nearby stars, some in-falling matter escapes as hot plasma.
当黑洞吞噬附近的行星时，一些落入其中的物质以热等离子的形式逃出生天。
My thesis is mainly related to the collective behavior of the relativistic electrons in the hot plasma.
本文主要在理论上研究了高温等离子体中相对论电子的集体行为。
If the black hole eats a star every 30,000 years, that hot plasma could provide enough energy to power the gamma-ray bubbles.
如果这个黑洞每隔30,000年吞掉一颗行星的话，那么这些热等离子就可能为驱动这两个伽马射线泡泡提供足够的能量。
If the black hole eats a star every 30, 000 years, that hot plasma could provide enough energy to power the gamma-ray bubbles.
如果这个黑洞每隔30,000年吞掉一颗行星的话，那么这些热等离子就可能为驱动这两个伽马射线泡泡提供足够的能量。
It will help to choose optimal construction materials for elements of the thermonuclear reactor that contacts with hot plasma.
这将有助于研究人员挑选出最适合热核反应堆的建筑材料，因为热核反应堆与高温等离子体会发生接触。
These plasma jets always appear at the boundary between the hot plasma and the cold target material, or between two plasmas with different Z-numbers.
这种类型的等离子体喷流总是出现在热等离子体与冷的固体靶物质的交界处，或者出现在不同原子序数的两种等离子体的交界处。
Cheng's model describes how, as the black hole continues to devour stars, shockwaves are created as hot plasma is repeatedly and periodically injected into the halo.
Cheng的模型描述了在黑洞持续吞食恒星时，热等离子体反复而周期性的被注入银河晕这样的震荡波是如何形成的。
Like the ozone layer, the magnetosphere is important to life on Earth because it protects us from most of the harmful radiation and hot plasma from the Sun, deflecting it into space.
与臭氧层类似，磁层对地球生物至关重要，绝大多数来自太阳的有害射线和热等离子体都被地球磁层折射回太空，从而使我们免受伤害。
Plasma — an ionized gas sometimes called the fourth state of matter — typically exists at thousands of degrees Celsius, and hot plasmas are regularly used to sterilizing surgical equipment.
等离子体——一种有时被称为物质第四状态的电离气体——通常存在于上千摄氏度中，而热等离子体常常被用于外科手术器械的消毒。
In this paper, the ICRF fast wave mode-conversion and correlative damping mechanism in an inhomogeneous hot plasma are investigated for the configuration of tokamak by using the kinetic theory.
本文对托卡马克位形，用动力理论研究了非均匀热等离子体的ICRF快波模转换及有关的阻尼机制。
As well as being very hot, the ionised gas of the corona (called plasma) has a superthin consistency. It is less than a billionth of the density of the hydrogen that makes up the main ball of the Sun.
日冕的电离气体（又叫等离子体）不仅非常炙热，而且异常稀薄，其密度还不到组成太阳主体的氢气密度的十亿分之一。
The super-hot 'quark-gluon plasma' is believed to have been the entire cosmos a fraction of a second after the Big Bang 13.7billion years ago.
人们相信，在137亿年以前的大爆炸几分之一秒后，这种超高温的“夸克-胶子等离子体”充满了整个宇宙。
High-speed plasma arc cutting technology plasma engineering hot metal cutting, and partial melting with high flow will also be the molten metal blow, form a narrow incision.
血浆高速等离子弧切割技术工程热金属削减部分熔融，并与高流量同样会被熔化的金属吹走，形成一个狭窄的切口。
Large current hot cathode glow discharge was used for plasma chemical vapor deposition of diamond films. It improved deposition rate and films quality efficiently.
大电流热阴极辉光放电用于等离子体化学气相沉积金刚石膜，有效地提高了沉积速率和膜品质。
Direct current hot cathode plasma glow discharge chemical vapor deposition (DC-HCPCVD) is a new method to deposit high quality diamond films with high growth rate.
直流热阴极辉光放电等离子体化学气相沉积法是我们建立的快速沉积高品质金刚石膜的新方法。
Plasma forms when gas becomes so hot that electrons are stripped from atomic nuclei, leaving behind a soup of charged particles.
当气体变得异常炽热，电子脱离了原子核，留下一团带电荷的粒子，等离子体就形成了。
The relation between characteristics of hot cathode glow discharge and diamond film deposition techniques in hot cathode glow discharge plasma chemical vapor deposition process was discussed.
研究了在热阴极辉光放电等离子体化学气相沉积金刚石膜过程中，热阴极辉光放电特性与金刚石膜沉积工艺的关系。
The spraying technology of plasma is a widely used hot spraying technology, accounting for more than 40% of the spraying craft.
等离子喷涂技术是一项应用极广的热喷涂技术，占喷涂工艺的40％以上。
The diagnostic methods, experiment results and some discussion in MM-2 ECRH experiment for heating plasma and building a hot electron ring have been presented in this paper.
主要叙述了MM-2装置通过ECRH加热等离子体并形成热电子环的实验诊断方法，原理、结果和讨论。
The key, it turns out, are called spicules, which vent hot gases, called plasma, from the sun's surface into the corona.
观测证明，（解决这个谜团的）关键是一种叫做针状体的东西，它从太阳的表面向日冕层释放出称为等离子体的高温气体。
In this paper, the effect of dust size distribution for the dust acoustic solitary wave (DASW) in the cold dusty plasma, the hot dusty plasma, the magnetized dusty plasmas and the dusty pl.
本文运用约化摄动法分别研究了冷尘埃等离子体、热尘埃等离子体、磁化尘埃等离子体和尘埃等离子体晶体中的尘埃声孤波现象，着重考虑尘埃颗粒大小分布对尘埃声波的影响。
The universe evolves from hot and dense plasma to thecooled-off universe which we observe today.
宇宙的演进是从炎热和浓密的等离子到现在的冷却。
The theoretical analyses predict that the drift wave is the most dangerois low frequency instability in the hot electron plasma.
理论上预示了在热电子等离子体中，等离子体漂移波是最重要的低频不稳定性。
The plasma source ion implantation device consists of pulsed negative high voltage power, hot cathode arc discharge system, vacuum chamber and target stage, vacuum system and monitor system.
等离子体源离子注入装置由脉冲负高压源系统、热阴极弧放电系统、真空室及样品台、真空系统和监测系统等五部分组成。
Welded pipe that bended by hot bending method with a set of specific die and welded by plasma arc welding method was used as tubular blank of SPF.
采用焊管作为管坯 ，焊管弯曲采用专用模具热弯 ，焊接采用等离子弧焊。超塑成形采用多层模结构 ，用模具来控制波形。
The sintering treatment includes protective atmosphere sintering, vacuum sintering, hot pressing, hot isostatic pressing and spark plasma sintering.
所述烧结包括保护气氛烧结、真空烧结、热压、热等静压、放电等离子体烧结。
The hot electrons can reduce the growth rate of the interchange mode and drift wave driven by the plasma, and suppress the anomalous plasma transport caused by the drift wave.
热电子能降低等离子体交换模和漂移波的增长率，减少漂移波引起的等离子体反常输运损失。
And also, the difference of combination intensity of diamond and its binding body made by hot-pressing sintering or by plasma-spray forming was analyzed and compared in the same way.
分析比较被熔射金属包镶的金刚石与被热压烧结的金属粉末包镶的金刚石，以及与其包镶体之间的结合强度的差异。
And also, the difference of combination intensity of diamond and its binding body made by hot-pressing sintering or by plasma-spray forming was analyzed and compared in the same way.
分析比较被熔射金属包镶的金刚石与被热压烧结的金属粉末包镶的金刚石，以及与其包镶体之间的结合强度的差异。
应用推荐