The method of file compression this app uses is many times referred to as the “Black Hole” by developers because of its extremely high compression ratios and mega-fast decompression.
这个程序使用的压缩算法通常被开发者们称作“黑洞”，这是因为它有着极高的压缩率和超快的解压速度。
Gun drilling is a high efficient and high precision hole processing method extensively adopted in foreign countries.
枪钻技术是一种高效率、高精度的孔加工方法，国外已广泛采用。
The paper introduced shallow hole shrinkage stoping method that has been used in Baoziwan Gold Mine for many years.
叙述了堡子湾金矿多年来应用浅孔留矿采矿法的生产实践以及对采切工程的改进。
This paper introduces a method of working thread hole on aluminum part.
介绍一种在铝件上加工螺纹孔的方法。
The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.
采用智能产品建模的方法，建立了气动潜孔冲击器的概念模型、装配模型和零件模型。
The principle and construction technique of horizontal frozen hole by pneumatic tamping pipe method were introduced in this paper.
介绍了气动夯管法施工水平冻结孔的工艺原理及施工工艺。
This article introduces mainly calculation of a slanting Angle of crankshaft clamping with the analysis method in machining crankshaft oblique oil hole.
主要介绍在加工发动机曲轴斜油孔时，用解析法计算曲轴装夹时所倾斜的角度。
Practices demonstrate that blocking balance hole is a effective method to resolve the axial negative thrust of rotor.
实践证明，堵平衡孔是解决转子轴向负推力问题的一种行之有效的方法。
Local optimal method is used in the design of hole connection to reduce pressure loss of the system.
在孔道连通设计中，还采用了局部优化的方法以减少系统的压力损失。
Taking a stadium as an example, the paper introduces a method to calculate hole coordinates in complex curves.
本文根据工程实例介绍了某个体育场施工中复合曲线上钻孔坐标的计算及测设方法。
Aimed at the problems in processing deep hole and narrow deep slot during die manufacture, electrolyzed processing method and experience of deep hole are introduced.
针对模具加工中，经常遇到的深孔及窄深槽的加工问题，介绍了深孔的电解加工方法、经验。
The treatment of collapse body by deep hole grouting was described in detail. The construction method and the treatment measures were introduced.
本文就深孔注浆处理隧道塌方体进行了详细阐述，并对该项施工方法和处理措施作了介绍。
As an example, we calculate the conducting plate with a circular hole, and compare the calculating results with those of analytical method.
对于一个中间有圆孔的导体板进行了计算举例，并与解析法的分析结果进行了比较。
The extrusion process for hole is a simple and reliable method fors mall sized and exact holes in batches.
孔的挤压加工是成批加工较小尺寸精密孔的一种简单和可靠的方法。
Millisecond delay technology of high step and deep hole is the first application in China, it offers a realistic method for high step exploitation of middle and small scale limestone mine.
高台段深孔孔内微差爆破技术在我国的首次应用，为中小型石灰石矿山高台段开采提供了切实可行的方法。
The scope of the residual stresses determined by the hole drilling method should not exceed one half of the material's yield strength.
钻孔法测量残余应力的范围是应力不超过材料屈服极限的一半。
The blank design principle and method for rolling ring with stepped hole is developed based on the volume flow law and the comparison to the ring rolling experiment is done.
基于阶梯孔环件轧制体积流动规律，提出了阶梯孔环件轧制用毛坯设计原理和方法，并进行了轧制实验验证。
Objective: to evaluate the value of three-hole method in laparoscopic cholecystectomy.
目的：探讨三孔法腹腔镜胆囊切除术的应用条件及价值。
Combining with a tunnel construction case, an ordinary method of ascertaining Optimum hole depths in small exploration tunnel drivage is discussed.
结合一坑道施工实例，论述了小型探矿坑道确定最优炮眼深度的一般方法。
The quick repairing method for the milling coal hole in the mining area is introduced.
简要介绍了在用的阶段溜煤眼的快速修复方法。
The optimum design method and basic principles of main reducer of rotary blast hole drill are discussed, The main reducer is taken as a whole and is optimized by discrete Complex method.
论述了牙轮钻机主机构减速器的优化设计方法和基本原理，以主机构减速器作为整体进行优化，采用离散复合形算法。
Objective:To explore the effects of out-cavity single-slip-knot technique in non-titanium clip two-hole method laparoscopic cholecystectomy(LC).
目的：探讨腔外单滑结技术在无钛夹二孔法腹腔镜胆囊切除术（LC）中的效果。
Measurement results and precision analysis indicate that workpiece hole heart distance can be fast and accurately obtained with the method.
实验表明，测量系统可快速、精确地测量工件孔心距。
Irrigation on film hole is a water saving method in both agronomic and irrigating aspects, but it is still imperfect in the technical factors.
膜孔灌溉技术是一种集农业节水与灌溉节水于一体的节水灌溉技术，但该灌水技术的技术要素研究还不甚完善。
A novel model for light propagation in elliptical hole photonic crystal fibers (PCF) is developed with localized orthogonal function method.
采用正交函数算法，提出了一种新型椭圆孔光子晶体光纤的本地正交函数模型。
The small blind hole method is used for the measurement of residual stress inside T joint.
采用盲孔法测定了丁字焊缝的残余应力。
The relieved coefficients during the measurement of the residual stresses in the fiber reinforced composites by the hole drilling method were given with conversion of the two coordinate systems.
针对纤维增强复合材料的属性特点，应用坐标系转换原理推导出通孔法测量复合材料残余应力时的应力释放系数公式。
The test results show that the technology of vertical deep hole presplitting blast is a feasible method in Shi Rengou Iron Mine.
在石人沟铁矿的试验结果表明采用垂直深孔预裂爆破技术在该矿是一种可行方案。
Strain gage hole drilling method is one of the most popular residual stress measurement methods.
应变片钻孔法是工程中应用最广的残余应力测量方法之一。
Strain gage hole drilling method is one of the most popular residual stress measurement methods.
应变片钻孔法是工程中应用最广的残余应力测量方法之一。
应用推荐