The layer has higher hardness.
渗层具有较高的硬度。
Ni-P coating layer has higher hardness and good wear resistance.
镀层具有较高的硬度及耐磨性。
A higher hardness does not increase the lifetime in rolling contact.
较高的硬度，在不增加滚动接触的一生。
Oat flour noodles with 15% egg albumin had significantly higher hardness than other blends.
与其他配方的面条相比，含15%蛋清蛋白的燕麦面条有最大的硬度。
The dry film has excellent properties, such as higher hardness, fast dry and other good properties.
漆膜具有高硬度、快干性及其他良好性能。
The experimental results show that, the composite coatings have higher hardness and wear resistance.
实验结果表明，复合镀层具有较高的硬度和耐磨性。
The molybdenum sintered at lower temperature by SPS having higher hardness is due to fine grain strengthening.
SPS在较低温度下烧结的钼的硬度较高，原因是其晶粒较细。
Comparing with the manual coating, the auto coating had smoother surface, denser structure and higher hardness.
相对于手动电刷镀镀层，自动化镀层表面形貌更加均匀细化，组织更加致密，显微硬度更高。
The front surface of the outer casing has higher hardness, and is uneasy to generate scratches and lose the color.
而且外壳的正表面硬度很高，不易刮花和掉色。
But owing to its coarser grain, denser structure, smoother surface, higher hardness and melt point, so its proportioning rate was limited.
但海砂的粒度比较粗，颗粒形状比较规则、结构比较致密、表面比较光滑、硬度和熔点都比较高，使它的用量受到一定限制。
The results indicated that the newly designed alloy has higher hardness of about 58 HRC and good wear resistance, which is improved 4.7 times.
结果表明：制备的合金涂层具有较高的硬度，达到58HRC，其相对耐磨性提高了4.7倍。
It has been shown that there are the complex structures, higher hardness, good connecting strength, excellent oxidation resistance on the layers.
结果表明：喷熔层具有复杂的组织结构、较高的硬度，优良的结合强度和抗氧化性。
Where required, some of the alloys also offer post form, heat treatment (age hardening) capabilities for even higher hardness and strength levels.
如果需要，一些合金还可以提供成形后热处理(老化硬化)至更高硬度和强度的能力。
Bainite has higher abrasive wear resistance than tempered martensite with equal or higher hardness in hard abrasion, but in reverse in soft abrasion.
下贝氏体组织在高应力磨料磨损下比相同硬度，或稍高硬度的回火马氏体组织具有较高的耐磨性，但在低应力磨损下表现为不利的作用。
The results show that a more uniform microstructure and higher hardness were obtained in the ceramal layer, and there are no porosities and cracks in it.
结果表明，金属陶瓷涂层具有更均匀的显微组织和高的硬度，没有孔洞及裂纹产生。
The results show that the H13 steel treated by new process has higher hardness and heat-fatigue property. The service life of hot-forge die is prolonged.
结果表明：h13热锻模具钢经此工艺处理后，具有较高的硬度和热疲劳性能，延长了模具的使用寿命。
With the higher hardness and other advantages, diamond tools are more and more widely used for processing hard and brittle non-metallic materials nowadays.
目前，由于金刚石工具具有硬度高等优点，在硬脆非金属材料的加工中被越来越广泛的使用。
A kind of low-alloyed wear resistant cast steel used for exit grill plates of ball mill is developed. It has good toughness, higher hardness and wear resistance.
研制用于球磨机栅格板的低合金耐磨钢，它的韧性好，硬度和耐磨性较高。
The problem that is the higher hardness and wear-resistance of cutter materials the lower strength and toughness of them is solved efficiently by the coated cutter.
涂层刀具有效地解决了刀具材料的硬度和耐磨性越高而强度和韧性越低的矛盾。
Compared with conventional metallic materials, advanced ceramics have higher melting point, higher hardness, lower density, better anticorrosion property and wear resistance, etc.
陶瓷材料具有熔点高、硬度高、密度小、耐腐蚀、抗氧化等诸多优点，在冶金、化工、机械、宇航等领域已得到较多应用。
The results indicate that microcrystalline deposit with low phosphorus content has higher hardness, modulus and fatigue resistance than the amorphous deposit with high phosphorus content.
结果表明，低磷微晶镀层较高磷非晶镀层具有更高的硬度、弹性模量和疲劳抗力；
Compared with the existing coating material, the film of the coating material simultaneously has the advantages of smaller surface roughness, higher hardness and better wearing resistance.
与现有的镀膜材料相比，本发明提供的镀膜材料的薄膜同时具有较小的表面粗糙度、较高的硬度和较好的耐磨性。
This article hes briefly described the principle of preparation of solvent-free and higher hardness aqueous polyurethane resin, and discussed the influence of various factors on the resin properties.
简述了低溶剂型高硬度水性聚氨酯的研制原理，讨论了各项因素对树脂性能的影响。
Very high tensile material. Very good when differential hardness is required due to its resistance to galling. Higher corrosion resistance than high straight chrome alloy steels.
具有很高抗拉强度的材料。由于具有抗磨损性能，因此特别适用于要求微分硬度的应用场合。与高纯度铬合金钢相比，具有更好的耐腐蚀性能。
Ungula and ring fracture are due to higher surface hardness. The rational suggestions to settle fracture are put forward.
爪形和环形断裂由表面硬度偏高造成，并提出解决断裂问题的合理化建议。
Generally speaking, the higher the hardness, the better the quality.
一般来讲的话，硬度越高，质量越好。
Nitriding develops extreme hardness in the surface of steel. This hardness ranges from 900 to 1,100 Brinell, which is considerably higher than that obtained by ordinary case hardening.
渗氮在钢表面获得远远超出正常标准的硬度。其硬度范围为900到1,100布氏硬度，这远高于普通表面硬化所获得的硬度。
Thus, these rolls require a higher surface hardness and must be hardened to a greater depth.
因此，辊子需要较高的表面硬度和较深的硬化层深度。
General Stamping elbow in a high carbon content is greater hardness, higher strength, but low plasticity.
一般冲压弯头中含碳量较高则硬度越大，强度也越高，但塑性较低。
This hardness ranges from 900 to 1,100 Brinell, which is considerably higher than that obtained by ordinary case hardening.
其硬度范围为900到1，100 布氏硬度，这远高于普通表面硬化所获得的硬度。
应用推荐