However, due to its strong nonlinearities, it is difficult for a pneumatic servo system to achieve higher control precision.
但是，由于气动伺服系统的强非线性，对其实现高精度的有效控制一直是个难题。
The application results show that the system is reliable and easy to operate and has a higher control precision, and the good economic benefits are gained.
现场应用结果表明，该厚控系统工作可靠、操作方便、控制精度高，取得了很好的经济效益。
The simulation experiment show that the speed control System's dynamical character is better, and has higher control precision. It is a new way to control diesel engine.
实验仿真表明，该调速系统动态特性较好，有较高的精度，不失为柴油机调速的一种新方法。
The simulation presents it has higher control precision than BP nervous network PID controller and conventional PID fuzzy controller, and meets the design control demand.
实验证明，变系数模糊pid参数自整定控制器比常规pid控制器和BP神经网络PID整定控制器有更高的控制精度，且达到了设计要求。
The measure department needs a temperature control system which should have higher precision, stability, dependability on founding a temperature entironment.
这就要求计量部门具有能建立具有更高的精度、稳定性和可靠性的恒定的温度场环境的温度控制系统。
It presents that the parallel operation control method with power balance controller can achieve higher power distribution precision.
指出采用功率平衡控制器并车控制方法可以达到较高的功率分配精度。
Although it is cheap, the time-relay, with the low control precision, stability, reliability and other performance, can't satisfy the demand for higher quality of Cu-Al pipe welding.
虽然时间继电器成本低，但若达到铜铝管焊接高质量，其时间控制精度、稳定性、可靠性等性能指标已不能满足要求。
To achieve the precision control of phase current or phase flux linkage in switched reluctance motor (SRM), the higher switching frequency of converter is required to increase dynamic response speed.
为了实现开关磁阻电机(SRM)绕组电流或磁链的精确控制，必须提高SR M功率变换器的工作频率以提高系统的动态响应速度。
Experimental results indicate that the movement control platform to achieve good network remote control, through a secondary interpolation algorithms achieve higher speed and precision of movement.
实验结果表明，本运动控制平台能很好的实现网络的远程控制，通过新型二次插补算法达到较高的运动速度和精度。
But the Magnetic bearing is a complicated nonlinear system. Linearization of the bearing makes it hard to express the behavior of the system and to control it in higher precision.
然而，磁悬浮轴承系统是一个复杂非线性的系统，将它抽象成为一个线性系统，无法体现实际系统本身的动态特性，也无法满足更高的控制精度的要求。
Anthropomorphic Fuzzy Control method is proposed according to the humane driving experience and the Fuzzy Control Theory, which can maintain higher guidance precision and acquire better robustness.
借鉴了人类驾驶车辆的经验知识，并应用模糊控制理论提出了一种拟人模糊控制方法，从而获得了较高的精度和较好的鲁棒性。
The experiment demonstrates that control system has a better adaptive ability to changes of sand component and production environment and has a higher controlling precision.
实验表明，该控制系统对型砂及环境条件的变化有较强的适应能力及较高控制精度。
Practical application shows that the system is reliable, stable and higher precision of control.
实际应用表明，该系统可靠、稳定、控制精度较高，目前已在很多工厂广泛应用。
In addition, as the complexity of its tasks increase, we need higher precision and larger scale of control.
另外，随着移动机械臂的任务不断趋向复杂化，对控制精度和运动控制范围提出更高的要求。
For higher accuracy and resolution, the calibration of high-precision digital thermometer has a higher requirement to its standard instrument, supporting equipment, environmental control and so on.
高精密数字测温仪因准确度和分辨力较高，对校准所用的标准器及其配套设备、环境控制等都有较高的要求。
Compared to cold drawing process, the cold rolling for high precision bars has certain distinct advantages: better surface finish obtained. superior dimension control and higher metal yield.
前言：冷轧法生产的高精度钢材较冷拔法具有更好的表面质量、尺寸精度和高的收得率。
The experiments shows that image registration method based on control point is effective in image registration, and it has higher registration precision.
实验结果表明在该软件系统中采用基于控制点的配准方法可有效解决图像配准问题，而且具有较高的配准精度。
This system has higher con-trolling precision and reliability, and is suitable for the control of gas, carburizing of the one or multiple pit furnaces.
该系统具有较高的控制精度和可靠性，适用于单台或多台井式炉气体渗碳的控制。
The main circuit consists of intelligent power module (IPM), TM320F240 is used as the control center of firepower-control servo system with higher precision.
系统以智能功率模块(IPM)构成主电路，以TM 320f 240为控制核心组成高精度火控仪伺服系统。
Simulation analysis proves that the fuzzy adaptive control system is able to realize intelligent control of NC machining with higher identification as well as control precision.
结果表明所建立的模糊自适应控制系统能够以较高的辨识与控制精度实现数控加工的智能自适应控制。
DAC310 and DAC360 control system is optional, which can meet demand for higher precision of cutting and control.
可选用DAC310、DAC360数控系统以满足更高精度要求的剪切和控制。
The test results show that the pulse signal generate and control device based on this type of trigger has characteristics of simple, easier operation, higher precision, lower cost and so on.
试验结果表明，以该触发器为控制核心的脉冲信号发生与控制装置具有结构简单、调节方便、性能可靠、造价低等特点。
Comparing with the traditional temperature control devices, this system has the character of more simple structure, higher precision and wider application.
与传统装置相比，具有结构简单，测温精度高、应用面广等特点。
In the control system of welded tube flying saw, it has higher controlling precision, stable running property and higher reliability.
介绍了新型焊管定尺飞锯计算机系统柔性控制、定尺精度的在线调整和可靠性设计。
Since running, the system runs steadily, its control precision is higher and the quality of steel tube is satisfactory. The expected effect is achieved.
投运以来，系统运行稳定可靠，控制精度高，钢管质量好，取得了预期效果。
Joined to the numerical control index head to be allowed to process the machine parts as the gear, the worm gear, and so on, also has the higher processing precision.
配上数控分度头可以加工齿轮、蜗轮等机械零件，且有较高的加工精度。
The method has features of higher reliability, higher precision, easy to automatic control and independent on platform direction.
该方法具有可靠性高、精确度高、便于自动控制、不依赖于机载平台运动方向等优点。
The method has features of higher reliability, higher precision, easy to automatic control and independent on platform direction.
该方法具有可靠性高、精确度高、便于自动控制、不依赖于机载平台运动方向等优点。
应用推荐