High temperature sensor for the gas turbine special purpose is designed to measure and control the temperature of the gas turbine.
基于燃气轮机高温温度测量与控制，研制了一种燃气轮机专用高温温度传感器。
The system applied two sensor elements: NTC type high precision temperature sensor and a resistor type relative humidity sensor from Japan.
改系统适用于两个传感器要素：ntc型高精度温度传感器和电阻式相对湿度传感器来自日本。
In this paper, a practical technique to measure heat of combustion is given by way of applying high sensitive bridge temperature sensor linked microcomputer and automatic data acquisition system.
本文给出通过高灵敏度桥式温度传感器与微机联机，采用自动数据采集技术测定燃烧热的方法与实用技术。
A high accuracy temperature sensor is designed by applying the temperature characteristics of a substrate bipolar transistor in CMOS technology.
利用CMOS工艺下衬底型双极晶体管的温度特性，设计了一种精度较高的温度传感器。
A high sensitivity semiconductor thermoelectric module is used in a optical radiation detector to detect temperature changes of the sensor.
在光辐射探测器中，采用了一种高灵敏度的半导体热电组件探测灵敏元的温度变化。
Comparing with the other sensors, the digital temperature sensor DS1621 and the insertion sensor for measuring moisture content of cereals are of easy use, high precision of measuring and so on.
与其它的温度、水分传感器相比，数字温度传感器ds1621及插杆式水分传感器具有使用方便、测量精度高等优点。
The problems of influences of edge displacement disturbance, tack weld disturbance and high arc temperature on the sensor have been solved.
在传感器方面解决了错边干扰、定位焊点干扰及电弧高温的影响。
On the other hand, the attenuation of high temperature fiber used for temperature sensor is still too high for communication purpose.
主要用于传感的耐高温光纤的衰减太大，也不能用于通信。
Different metal and the nonmetallic oxide compound material which insistent to high temperature are analyzed, then the mix oxide compound of high emissivity is chose to make temperature sensor tip.
对不同耐高温的金属和非金属氧化物材料进行分析，选择高发射率的混合氧化物作为温度传感探头的材料；
How to elect the solid image sensor in accord with the requirement of high temperature measurement is an important problem.
如何选择能符合温度测量要求的固体摄像器件是值得重视的问题。
The main advantages of porous silicon gas sensor are higher sensitivity and selectivity without heating in the room temperature, high measure precision and low price.
多孔硅乙醇气体传感器的主要优点：在室温下不用加热就具有很高的灵敏度、选择性好、测量精度高、价格低等。
A high sensitive fiber Bragg grating (FBG) strain sensor with automatic temperature compensation is demonstrated.
证明了一种自动温度补偿高灵敏光纤光栅应变传感器。
The serial digital temperature sensor MC74 is the high precision IC. It has many characteristics, such as low cost, high precision, serial linear output etc.
MC74型串行数字温度传感器具有价格低、精度高、串行线性输出等优点。
System USES sing high sensitivity of the temperature sensor LM94022 and smoke sensor NIS - 09c as detectors.
采用高灵敏度的温度传感器LM 94022与烟雾传感器NIS-09c作为探测器。
By the fiber grating as temperature sensor, the on-line monitoring system of temperature for the contact inside the high voltage switchgear was put forward.
采用光纤光栅作为温度传感器，提出了测量高压开关柜内接头温度的在线监测系统。
Sensor adopts electric thermocouple and platinum resistance, in allusion to high and low temperature measurement.
传感器分别针对高温和低温测量，采用热电偶和铂热电阻并完成电路设计。
The high temperature materials, phased array sensor, and low current requirements stabilize the output signals over a wide range of input voltage, ambient temperature, or output frequencies.
高温材料，相控阵传感器，低电流的要求较稳定的输入电压，环境温度，或输出频率范围的输出信号。
Temperature sensor will be used to measure the temperature signal and build temperature for PID adjusting to realize the automatic output high frequency power.
利用温度传感器测到被控对象的温度信号与设定温度值进行PID调节，从而控制高频输出功率的大小。
High temperature SOI Monocrystal silicon pressure sensor is a new type high temperature pressure sensor with high performances.
单晶硅soi高温压力传感器是一种新型高性能高温压力传感器。
Using the IC temperature sensor AD590 and the A/D convertor 7107 etc. , a high precision digital-displayed temperature controller is designed.
用集成电路温度传感器AD590及A/D转换器7107等器件，制作了高精度数显温控计。
Based on the principle of infrared radiation, a non contacted digital sensor which can be used on temperature measurement of high voltage power equipment is designed.
基于红外辐射原理，研制了用于高压电力设备的非接触数字式测温传感器。
According to the result of simulation and characteristic of monocrystalline silicon SOI structure, a novel high temperature SOI pressure sensor with a rectangle diaphragm was designed.
根据模拟结果并结合单晶硅材料和SOI结构的特点，设计出了矩形应力膜单晶硅soi高温压力传感器芯片。
A kind of pressure sensor applied to high-temperature, high-pressure and corrosive environment was designed to meet the demand of research on extreme environment.
设计一种可应用于高温高压、强腐蚀性环境的压力检测传感器，以满足极端环境科学研究的需求。
The design method and the prodution technology of the high temperature electric vortex leakage sensor is proposed.
给出了高温型电涡流间隙传感器的设计方法和产品生产工艺。
The Temperature sensor has the advantages of high stability and reliability, and it has great anti interfere capacity and high measuring precision.
该传感器具有工作稳定、可靠、抗干扰能力强、测量精度高等优点。
AIN ceramic material with high thermal conductivity, it can be used as the enclosure material for sea temperature sensor.
可用于海洋敏感器件封装的氮化铝陶瓷材料具有高的热导率特性，本文对它的热导率进行了实验研究。
Temperature sensor and automatic fan control technique integrated circuit is the development tends in cooling high-speed chips. It can not only subtract costs, but also reduce the pollution of noise.
采用风扇自动控制技术与温度传感器集成电路，不仅可以节约成本，而且减少噪音污染，是高速芯片冷却技术的发展趋势。
ATC, temperature sensor failure cutoff and alarm, high-temperature cutoff and low temperature alarm, blocked pump motor, auto-restart after power failure and run-dry protection.
数显温度校正，传感器异常保护和报警，高温保护和低温报警，泵马达堵转，停电恢复，防干烧。
For the calibration in high temperature, the K which is re-lated to the reciprocal of sensitivity C of the sensor is adopted as charat-eristic factor, which brings convenience to users.
在高温标定时，采用与传感器灵敏度C有倒数关系的K 值作为传感器的特征系数，给使用者带来方便。
SHT10 sensors probe by the high level of integration of temperature and humidity sensor chip, offering a full range of digital output calibration, the determination of temperature and humidity values.
传感器探头由SHT10 高度集成的温湿度传感器芯片，提供全量程标定的数字输出，测定温、湿度数值。
应用推荐