Heat analysis-the chemical analysis determined by the steel producer as being representative of a specific heat of steel.
炉次分析-是炼钢厂决定对钢特定炉次样本所做的化学分析。
Finally the melting temperature ranges of different components in the sample are tested by a differential heat analysis scanner (DSC).
最后通过差热分析扫描仪(dsc)测试样品各成分的熔融温度范围。
And then, we confirm the external conditions of finite element heat analysis after analyzing the cooling ways of multiple magnetic circuit transformers.
分析多磁路变压器的冷却方式，确定有限元热分析的外部条件。
It's influence on the properties of anhydride cured epoxy resin was studied by scanning electron microscope, heat analysis, limiting oxygen index determination and other methods.
并用扫描电镜、热分析、氧指数和机械性能测定等方法研究了HB—1对酸酐固化的环氧树脂性能的影响。
This paper discusses the influence of the design mode on insulation system including solid insulation and insulation liquid, and carries out the heat analysis of winding and oil duct.
文章讨论了这些设计方式对绝缘系统包括固体绝缘和绝缘液体的影响，并且对绕组和油道进行了热分析。
The heat analysis of binary current leads which consist of copper current lead and high temperature super conducting was made on condition that the lead was cooled by two-stage refrigerator.
对在两级制冷机传导冷却下由高温超导和铜组成的二元电流引线进行热分析。
Nonetheless, it is there, and decades of analysis have failed to find a straightforward reason, such as a heat leak from the probes.
虽然如此，但他确实存在，分析了几十年，也未能发现任何简明易懂的理由，如：探测器有热泄漏。
The analysis also tracked weather changes that contributed to massive floods in Pakistan and a heat wave in Russia, saying an "unusually strong jet stream" from June to August was to blame.
该数据还分析了天气变化对巴基斯坦大洪水和俄罗斯热浪的推动作用，认为六月到八月的一场“异常强烈的（对流层顶的）射流”是最终原因。
The thermal reliability research have two main aspects : testing the distributed heat by multi-temperature measure instrument and the thermal analysis in the assistance of CAE software.
采用多点温度测试仪器进行热分布测试，借助CAE软件进行热分析是热可靠性研究的两个重要方面。
In this paper the effect of using direct heater on heat economy of sugar factories is discussed, also the quantity analysis method and calculation equations for vapor consumption are introduced.
本文讨论了直接加热器在糖厂使用对糖厂热力经济的影响，介绍了直接加热过程蒸汽消耗的数量分析方法和计算公式。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
Modeling the heat transfer capacity of cleanly heating surfaces based on statistical analysis.
建立了基于统计分析的锅炉清洁受热面传热量的计算模型。
By heat balance analysis of the whole regenerative system, which is regarded as a closed thermodynamic system, the calculation model on the influence of HPs removal on heat economy of unit is derived.
以汽轮机功率方程和锅炉吸热量方程为基础，并将机组的整个回热系统视为一闭口热力系统，通过对其的热平衡分析，得到了高加切除对机组热经济性影响的计算模型。
A simple iteration method is proposed for the complex nonlinear (regression) analysis of heat transfer data.
在对复杂的非线性方程进行回归分析时，提出了一种简单的迭代分析方法。
The heat storage principle and material of electric heat solid heat storage device is introduced, and heat transfer analysis is made on the heating and discharging.
介绍了电热固体蓄热装置的蓄热原理和蓄热用材料，对加热过程和放热过程进行了传热分析。
Through environmental quality analysis, health effect evaluation and economic efficiency assessment, initially proved interfering effects of centralized heat suPPly measures on the environment.
通过对环境质量分析、健康效应评价和经济效益估算，初步论证了集中供热措施的环境干预作用。
As the key parameter in heat transfer analysis of double skin facade system, the convective heat transfer coefficient is very important in considering energy-efficient and economical performance.
该对流换热系数作为双层换气幕墙传热分析的一个关键参数，对考察双层幕墙热工性能、经济性能有着重要作用。
The electron heat transport is studied by analysis of observed cold pulse propagation during gas modulation in HL-2A ohmic discharge.
利用调制送气过程中观察到的冷脉冲传播，研究了在HL-2A装置欧姆放电条件下的电子热输运。
In the heat transfer analysis, combining temperature on tire side tested by drum test, a numerical inverse method is described for determining the heat convection boundary on tire side.
热传导分析中，依据实测的轮胎胎侧温度场，提出了一种基于实验的数值反演方法来确定胎侧的对流热边界条件。
Applies the method of surface heat transfer analysis to calculating the convective heat transfer coefficient in order to solute the wall temperature.
建立了室内表面对流辐射耦合换热方程，着重讨论了采用表面换热分析法求解表面传热系数以求解壁温的方法。
Some thermotechnical problems are revealed through systematic analysis of temperature, air flow as well as heat flux in cellar.
通过系统地分析窖温、风温以及热流，发现了沟窖几个重要的热工问题。
The heat economic analysis model is set up for analyzing the performance of heat exchanger overall.
建立了热经济分析模型，对热交换器作出全面的性能分析。
The author proposed a plant heating program based on the MDF plant production waste estimate and a heat value analysis, taking into the consideration of all features of different heating systems.
通过对中密度纤维板厂生产废料量计算及其热值分析，结合各种热能系统的运行特点，提出了一套节能供热方案。
A formula of combined heat transfer coefficient was obtained based on the analysis of heat transfer of copper staves.
通过对铜冷却壁的传热过程分析，得到热面复合传热系数的计算公式。
During the early stages of field development, simpler methods of assessment such as stored heat calculation decline curve analysis or lumped parameter models are useful.
在热田开发早期，较简单的评价方法是有用的如：热储计算法、衰减曲线分析法或集中参数模型等。
Mehods For 153 pediatric patients with clinical characteristics of heat convulsions eeg recording and analysis.
方法对153例小儿高热惊厥患儿的临床特点和脑电图进行记录分析。
Finally based on the analysis of heat effect during tests, the mechanism of spontaneous combustion of coal is discussed.
最后，通过煤炭低温吸氧过程的热效应分析，对煤炭自燃机理进行了探讨。
Finally based on the analysis of heat effect during tests, the mechanism of spontaneous combustion of coal is discussed.
最后，通过煤炭低温吸氧过程的热效应分析，对煤炭自燃机理进行了探讨。
应用推荐