This paper analyze the influence of grinding wheel surface characteristics and dressing on grinding roughness of surface.
本文分析了砂轮表面特性和修整对磨削表面粗糙度的影响；
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means o...
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means of microcomputer and electronic microscope, the mechanism of...
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
Portable grinding tools need to be equipped with safety guards to protect workers not only from the moving wheel surface, but also from flying fragments in case of breakage.
便携式研磨工具应装有安全防护装置，这样不仅可防止工人接触运转的砂轮表面，而且他们也不会被破裂时飞溅的碎片击中。
Cylinders, straight cups, and flaring cups are used for surface grinding with the end face of the wheel.
用其端面进行表面磨削的圆柱、直杯及外展杯状砂轮。
Thus, working roller to perform uniform accurate grinding has not become true for roller surface rigidity and ORG grinding wheel rigidity fluctuating result in excessive or deficient roller grinding.
因此，当轧辊表面硬度波动及OR G砂轮硬度波动时常发生轧辊修磨过大或修磨不足等问题，还不能实现工作辊均匀精度修磨。
SHOULDER: Defect found on rib or outer diameter; a raised edge on rib face caused by grinding wheel; raised surface at either end of outer diameter raceway.
挡肩：外径或挡肩上发现的缺陷；挡肩上由于磨床砂轮所造成的突起；在外径滚道两端的突起。
As you can see, this method can be applied only when the surface to be ground is shorter than the width of the grinding wheel used.
正如料想的那样，这种方法只在要磨削表面比所用砂轮宽度短时才使用。
This article researched the relationship between balance precision of the grinding wheel and the ground surface roughness.
通过实验，对砂轮平衡精度与磨削加工工件表面粗糙度之间关系作了深入的研究。
For this reason, the speed of a grinding wheel should not exceed the safe surface speed limit specified by the manufacturer.
基于此原因，砂轮的速度不应超过制造商规定的安全表面速度的限制。
Introducing influence of grinding wheel on machining surface quality and grinding force when stainless steel gasket ground by combined grinding wheel.
介绍了组合砂轮磨削不锈钢垫片时砂轮对加工表面质量和磨削力的影响。
Grinding gear with the toroidal involute interior thread worm grind wheel is a new kind of process in hard surface gear finish machining.
渐开面包络环面内螺纹蜗杆砂轮磨齿，是一种硬齿面齿轮精加工的新型工艺。
Experimental results show that the grain size of diamond grinding wheel and grinding depth have important influence on micro-topography such as geometrical shape and surface topography etc.
实验结果表明，金刚石砂轮磨粒尺寸和磨削深度对磨削表面的微观形貌如几何形态和表面纹理具有重要影响。
It found that this kind of wheel has high efficient for sharpening tools. Using this wheel can avoid the tool surface crack due to grinding and reduced the dust in shop.
通过研究发现，浸渗砂轮在刀具刃磨方面是一种非常有效的工具，对于防止刀具表面磨削烧伤和减少车间粉尘污染有其特殊的使用价值。
Grinding gear with the toroidal involute interior thread worm grind wheel is a new kind of process in hard surface gear finish machining.
针对面齿轮硬齿面磨削加工中存在的困难，提出用蜗杆砂轮磨削的双参数法来磨削面齿轮。
It is found that the surface roughness influenced by wheel speed and grinding depth can be attributed to the changing of undeformed chip thickness.
研究发现：砂轮速度和磨削深度对表面粗糙度的影响都可归结为未变形切屑厚度的改变。
With spiral grooved grinding wheel, one can get better surface finish and roundness than with conventional grinding wheel, especially when applied in grinding hard material such as carbide.
采用这种新型砂轮可以比使用无螺旋沟槽砂轮降低表面粗糙度和提高圆柱度。对于加工难加工材料，如硬质合金效果特别显著。
Cast iron bond diamond wheel and ELID grinding technology are used on a surface grinder to research the high efficiency grinding technique.
本文在平面磨床上应用铸铁结合剂金刚石砂轮与ELID磨削技术进行高教磨削研究。
The surface topography of grinding wheel has great influence on the quality of workpiece and the grinding efficiency.
砂轮表面形貌对磨削表面质量及磨削效率有很大的影响。
The force and temperature of polycrystalline diamond grinding with diamond wheel are tested and analyzed, the machined surface is investigated with scanning electron microscope.
首先对金刚石砂轮磨削加工聚晶金刚石的磨削力和磨削温度进行了测试和分析，利用扫描电镜对工件加工表面进行了微观分析研究。
Such grinding wheel has advantages as high grinding ability and high grinding efficiency, but they are easy to induce scratches on the ground surfaces and hence make bad surface machining quality.
这种高刚度的砂轮具有高的磨削能力和磨削效率，缺点是被磨工件表面易产生划痕，难以获得高的表面加工质量。
It has been proved that increasing the speed of the grinding wheel can lead to a reduction in grinding forces, grinding wheel wear, and in workpiece surface roughness, or an increase in productivity.
研究表明增加砂轮线速度可以降低磨削力、工件的表面粗糙度和砂轮的磨损，或者可以提高生产效率。
This paper introduces the grinding machine used on the processing of mirror surface of optical parts and the superfine diamond grinding wheel and its dressing technique.
本文主要阐述了光学零件镜面磨削加工的机床、超微粒金刚石砂轮及其修整技术。
In this paper, the CBN grinding wheel of high efficiency, accuracy and surface quality was studied by means of low pressure abrasive water jet.
采用低压磨料水射流对高效率、高精度、高表面质量的CBN(立方氮化硼)砂轮进行了研究。
Grinding performance of the brazed wheel in the surface grinding of cemented carbide is studied.
以硬质合金为加工对象，研究了该砂轮的磨削性能。
The results show that higher heat flux causes higher temperature on external circular surface of the grinding wheel.
在冷端条件一定的情况下，提高砂轮转速能降低砂轮外圆面温度。
In the grinding process of ceramic material, the surface quality is directly affected by the property of diamond grinding wheel and the grinding parameters.
在陶瓷材料的磨削加工过程中，金刚石砂轮特性和磨削用量直接影响磨削表现质量。
In the grinding process of ceramic material, the surface quality is directly affected by the property of diamond grinding wheel and the grinding parameters.
在陶瓷材料的磨削加工过程中，金刚石砂轮特性和磨削用量直接影响磨削表现质量。
应用推荐