Tenet chosen and method determined of technical parameter has been explained. Its reliability and its superiority is verified with grinding test.
说明了主要技术参数的选择原则和确定方法，并通过砂光试验验证了该产品的可靠性和优越性。
The compensation grinding test on M131 cylindrical grinder showed that the designed measuring & compensating systems have improved the roundness of machined workpiece up to 30%.
在M131外圆磨床上的补偿磨削试验结果表明，所设计的测量补偿系统能够达到改善被加工工件圆度的目的，补偿后工件圆度误差减少近30％。
The effects of grinding parameters on surface roughness of Marine propeller blade were studied by using orthogonal test.
通过正交试验研究了磨削参数对船用螺旋桨叶片表面粗糙度的影响。
The grindability test has a moderate range of degree of fineness and departure from the range would result in excessive consumption of grinding work.
易磨性试验存在一个适宜的细度范围，偏离这一范围就有可能导致粉磨功的大量消耗。
The properties of the composite cement were studied by orthogonal test, which was prepared by the clinker, slag and fly ash with different fineness and mixed after separately grinding.
采用分别粉磨再混合的方式，利用正交试验方法，研究了熟料、矿渣及粉煤灰的不同细度组合对复合硅酸盐水泥物理性能的影响。
Compared with single sensor, the virtue and necessity of multi-sensor integration technology are introduced based on the analysis of the way used to test abrasive belt grinding parameters.
在分析目前砂带磨削参数测试过程中所用方法的基础上，指出了多传感器融合的优点及必要性，并与单传感器的测试进行了比较。
The relationship between parameters of ball mill and quantity of fine powder was obtained by cross test. The concept of grinding zone and equation about grinding efficiency were proposed.
通过正交试验得出了球磨参数与细粉量的关系，并提出研磨破碎区概念，给出了球磨效率关系式。
Three different test methods for grinding performance evaluation of grinding fluids were used to investigate the influence of three kind grinding fluids on grinding process.
针对磨削液的使用性能，按四球试验法、攻丝扭矩模拟评定试验法、磨削加工试验法对三种磨削液进行了性能试验研究。
An iron oxide sludge smash characteristic was discussed by grinding experiment and the test of methods about increasing comminution efficiency was taken.
针对一种氧化铁渣进行研磨试验，分析讨论了它的研磨特性，并对提高研磨效率的途径进行了探索试验。
On the basis of test, some measures to avoid grinding cracks are established.
在实验研究的基础上确定了防止磨削裂纹的措施。
Use these technical parameters, carry the semisolid extrusion shaping to the slurry, then test the impact ductility, rigidity and impacting grinding abrasion.
采用上述工艺参数对浆料进行半固态挤压成形，并对挤压件进行冲击韧性、硬度和冲击磨料磨损测试。
Therefore, based on the laboratory test, an industrial test on the stage grinding and stage separation process was carried out.
为此，在实验室试验的基础上进行了阶段磨选工业试验。
This paper gives the results obtained in the industrial test of vertical grinding mills at Rushan Gold Mine, Shandong Province.
本文介绍了立式磨矿机在山东省乳山金矿的工业试验结果。
An acoustic emission (AE) test rig with signal acquisition virtual instrument system has been developed for engineering ceramics high speed deep grinding.
建立了工程陶瓷高速深磨中声发射的实验系统，自主开发了其中的声发射信号虚拟仪器采集系统。
In order to find out the optimum economic crushing particle size, the work index of crushing and grinding have been obtain by through the test work.
为了确定最佳破碎产品粒度，进行了碎磨功指数的测定工作，获得球磨给矿粒度与碎磨综合能耗的关系。
This test results have shown that the system is correct in principle, fast in balance speed, high in balance accuracy and can remarkably improve grinding quality.
实验结果表明：系统原理正确，平衡精度高，速度快，能显著地提高磨削质量。
According to the test results of grinding chatter and bluntness of emery wheel, the condition identification ability of different distance functions is compared and analysed.
结合对磨削颤振与砂轮钝化的试验结果，比较并分析了不同距函数的状态识别能力。
The mechanism of profile grinding burn and its influencing factors are analysed through the simulated test of profile grinding racks, and the improvements of grinding burn are proposed simultaneously.
采用金相分析法，分析齿轮烧伤试件的齿面温度分布状态，结合成形磨削齿条的模拟试验，研究成形磨削烧伤形成机理及影响因素，提出了避免成形磨削烧伤的工艺措施。
According to the characteristic of the ELID grinding, test bench was designed in study of ELID (electrolytic in-process dressing) grinding.
根据ELID磨削的特点，设计了专门用于研究ELID磨削的试验台。
In this test, the grinding, flotation and reagent consumption are discussed, and some progresses are made.
试验对铜渣的磨矿、浮选、药剂用量进行探讨，取得一定成效。
Wed o field test experiment on surface grinding machine of series M7180 (70), and analyze the spectrums characteristics of the testing signal.
对m 7180(70)系列平面磨床进行了现场实验测试，并对测试信号进行幅频特征分析。
Test was made on separating iron from a low grade Vanadiferous titanomagnetite ore by a process of tailing discarding at a coarser size, staged grinding and staged low intensity magnetic separation.
采用粗粒抛尾—阶段磨矿、阶段弱磁选工艺对某低品位钒钛磁铁矿进行了选铁试验研究。
The test shows that the mills are characterized by high grinding efficiency, low power consumption, high steel-saving and low noise.
试验表明，立式磨矿机具有磨矿效率高、节能、节钢幅度大，噪音低等特点。
Through laboratory test and commercial test, the processing technology of ultrafine grinding of natural zeolite is investigated.
通过实验室型和工业型试验，研究了湿式搅拌磨细磨天然沸石的工艺技术。
Valve with the valve sealing surface through precision grinding, assembly, after 100% completion of pressure test, all to achieve zero leakage.
阀瓣与阀体密封面经过精密研磨，组装完毕经过100%试压，全部达到零泄漏。
The structure, mechanics models and optimum design method of milling grinding pans for cutting refractory ceramics are introduced. The good performances of the pan are validated by a cutting test.
介绍了加工硬脆陶瓷用铣磨盘的结构特点、加工时的力学模型及铣磨盘的优化设计方法，并通过铣磨试验验证了铣磨盘的优良性能。
Experiments on the grinding wheel and the rotor test rig are carried out, which have validated the procedure.
实验表明，本文所建立的方法是有成效的，可用于转子现场动平衡。
Test research of discarding coarse tailings in new technological flowsheet consisting of two stage continuous grinding-gravity separation-magnetic separation-reverse flotation is described.
介绍了东鞍山矿石两段连续磨矿、重选-磁选-反浮选新工艺流程中粗粒部分抛尾试验研究。
Test research of discarding coarse tailings in new technological flowsheet consisting of two stage continuous grinding-gravity separation-magnetic separation-reverse flotation is described.
介绍了东鞍山矿石两段连续磨矿、重选-磁选-反浮选新工艺流程中粗粒部分抛尾试验研究。
应用推荐