Grinding speed adjustable and wider grinding scope.
研磨速度可调，适用范围更广泛。
Additionally, grinding time and grinding speed have been found greatly affect the performances of the composite.
另外在研究过程中还发现研磨时间和研磨速度的变化，对材料的储氢性能也有一定的影响。
With the increase of grinding speed or the abrasive grain size of the grinding belt, the grinding rate increases.
提高砂带速度、工件转速以及增大砂带磨粒粒度可有效地提高花岗岩的磨削效率。
The results indicate that increasing the vertical pressure or grinding speed is beneficial to the grinding process of ceramic corundum abrasive belt.
试验结果表明，采用较大的法向压力或适当增大磨削速度等磨削参数，可以高效发挥陶瓷刚玉砂带的磨削性能。
Research results indicate that there is an optimum grinding speed range during grinding PCD in which the lowest cost and higher efficiency can be realized.
研究结果表明，磨削pcd材料时存在一个最佳磨削速度范围，在此范围内磨削成本最低、磨削效率较高。
Grinding head on, sliding imports of dual-use system linear guide, two-ball screw drive, to achieve the smooth running speed to eliminate mobile space (displacement).
磨头座、滑动系统采用进口的双直线导轨、双滚珠丝杆传动，以达到运行速度平稳、消除移动间隙(位移)。
High speed grinding and ultrahigh speed grinding is an advanced processing technique which can raise grinding efficiency, reduce work surface roughness and promote machining quality of the parts.
高速超高速磨削是提高磨削效率、降低工件表面粗糙度和提高零件加工质量的先进加工技术。
This test results have shown that the system is correct in principle, fast in balance speed, high in balance accuracy and can remarkably improve grinding quality.
实验结果表明：系统原理正确，平衡精度高，速度快，能显著地提高磨削质量。
To a great extent, the construction design and the dynamic performance of the electric spindle determines the precision and efficiency of high-speed grinding machining.
电主轴的结构设计、动态特性在很大程度上决定了高速磨削加工的精度和效率。
For this reason, the speed of a grinding wheel should not exceed the safe surface speed limit specified by the manufacturer.
基于此原因，砂轮的速度不应超过制造商规定的安全表面速度的限制。
It is found that the surface roughness influenced by wheel speed and grinding depth can be attributed to the changing of undeformed chip thickness.
研究发现：砂轮速度和磨削深度对表面粗糙度的影响都可归结为未变形切屑厚度的改变。
In this paper, an actual method is made to fulfil high - speed precision grinding of elliptic parts based on PMAC time - based control.
文章就实现椭圆形零件的高速高精密磨削的问题，提出了采用PMAC时基控制的实验方法。
The technology of grinding ball by centrifugal casting, the rotational speed, the method for calculation of ingate area and factors influencing technological process were introduced.
介绍了离心铸造磨球的工艺，以及转速、内浇口断面积计算方法和影响工艺过程的因素。
Reference data of sand belt speed for sand belt grinding of different materials workpieces are provided.
提供了不同材料工件用砂带磨光时砂带速度的参考数据。
Aiming at the special require of ultra-high speed grinding processing, the mechanisms and characteristics of grinding fluids in ultra-high speed grinding processing is investigated.
文中针对超高速磨削加工的特殊要求，分析研究了磨削液在高速加工中的作用机理及特性。
The structure of grinding wheels can realize high point grinding, and the good grinding equiprobability lies on a proper spinning speed and the random variation of the spinning axis.
砂轮本身的结构特点可保证高点磨削的实现，而磨削等概率性则依赖于：生坯球合适的自旋速度及自旋轴方向的随机变化。
The new material for medium speed grinding roll-MnMo compound high chromium cast iron has been developed successfully.
成功研制了中速磨磨辊新材料——锰钼复合高铬铸铁。
The influence of varying speed grinding on the chatter increasing rate has been studied experimentally.
进行了变速磨削对颤振增长率影响的试验研究。
For longitudinal grinding, dressing speed is the biggest influence factor on the depth and area of grinding blockage.
纵向磨削时，修整速度对砂轮堵塞深度和堵塞面积影响最大；
Metal grinding flatbed for speed skate blade and metal grinding rod for figure skate blade were designed and developed.
主要结果和结论：设计制造出速滑刀金属研磨平板、勾刃冰刀金属研磨棒。
The ultra high speed grinding mode may improve the cutting conditions of the grains and thus reduce the specific grinding energy.
采用超高速磨削，对改善磨粒的切削状态，降低比磨削能是非常有利的。
The ultra high speed grinding mode may improve the cutting condition of the grains and thus reduce the specific grinding energy.
采用超高速磨削，对改善磨粒的切削状态，降低比磨削能是非常有利的。
We adopt the ceramic bearing electric spindle to achieve high speed and precision grinding.
实验室采用陶瓷球轴承作支承的电主轴做高速精密磨削。
The most important grinding variables from the point of view of wear are feed size, grinding media size, mill speed, and mill diameter.
就磨损观点来看，橡胶衬板最重要的磨损因素是给矿粒度，磨矿介质尺寸，磨机转速和简体直径。
This paper introduces the Converter applied in high-speed grinding machine and the soft, hardware design of inverter.
本文简介了变频器在高速磨床上的应用及逆变器的软、硬件设计。
The key problems of design of internal grinding machine low noise high-speed bearing were discussed.
针对内圆磨床低噪声高速电主轴设计的诸多关键问题进行了探讨。
Based on the characteristics of ultrahigh speed grinding, the general selection principle of abrasives, binders, hard - ness, concentration and structure of ultrahigh speed CBN wheels is discussed.
结合超高速磨削的特点，论述超高速c BN砂轮中磨料、结合剂、硬度、浓度、组织的一般选用原则。
An acoustic emission (AE) test rig with signal acquisition virtual instrument system has been developed for engineering ceramics high speed deep grinding.
建立了工程陶瓷高速深磨中声发射的实验系统，自主开发了其中的声发射信号虚拟仪器采集系统。
An acoustic emission (AE) test rig with signal acquisition virtual instrument system has been developed for engineering ceramics high speed deep grinding.
建立了工程陶瓷高速深磨中声发射的实验系统，自主开发了其中的声发射信号虚拟仪器采集系统。
应用推荐