From the laying style of the gas electrode point of view, the method on how to improve the zinc-air batteries discharge performance was researched.
从改变空气电极的摆放方式的角度研究了改善锌空气电池放电性能的方法。
The paper proposes the vertical style of the gas electrode should be taken in the battery in order to improve the battery's performance and efficiency.
提出采用立式的电极摆放方式，以改善电极和电池性能及效率。
When electricity, whether from photovoltaic cell, wind turbine or other sources, runs through the electrode, the cobalt and phosphate form a thin film on the electrode and oxygen gas is produced.
当电流——无论是来自光伏电池、风轮机还是其它来源——穿过电极时，钴和磷酸盐会在电极上形成一层薄膜，氧气就生成了。
The key component in the process is a catalyst -- cobalt metal, phosphate and an electrode, placed in water -- that produces oxygen gas from water, while another catalyst produces hydrogen gas.
研究人员解释说，这个流程的关键组成成分是一个催化剂-放置在水中的钴金属、磷和电极-这个催化剂从水中产生氧气，另一个催化剂产生氢气。
By using graphite as electrode, the laser can be operated up to 50hz without gas flowing.
采用石墨作为激光器电极使激光器能在体不流动情况下以每秒50次运转。
PP-H welding method is commonly used in thermal contact welding and the use of hot gas welding electrode .
H 的焊接常用的方法是热接触焊接和使用焊条进行热气焊。
The working principle, structure design and critical fabricating technology of a new type of SO2 gas sensor with three-electrode structure are introduced.
介绍一种新型三电极结构SO 2气体传感器的工作原理、结构设计及其关键制作技术。
Hydrogen gas bubbles form on the electrode, and the negatively charged OH - ions migrate away from the negatively charged electrode.
氢气气泡的形式对电极，和带负电荷的哦-离子迁移脱离带负电荷的电极。
In this paper, a gas diffusion electrode was made by hot pressure method and character by XRD.
本文采用热压法制备了一种多孔气体扩散电极并对其进行了XRD表征。
All these and other developments show that welding is no longer what it was in time past, the simple matter of running a bead with a gas flame or a stick electrode.
所有这些和其他的新技术都显示焊接不再是过去那样，只用气体火焰或一根焊条焊一道焊缝的简单问题了。
ZnO can be used to fabricate transparency electrode, piezoresistor, cell battery window, surface acoustic wave device, gas sensor and light-emitting diode etc.
它可以被用来制作透明电极、压敏电阻、太阳能电池窗口、表面声波器件、气体传感器、发光二极管等。
The dependence of etching rate and profile on the vacuum pressure, RF pow-er, gas composition and flow rate, and electrode temperature is analyzed.
分析了真空压力、射频功率、气体组合及其流量和电极温度对刻蚀速率、刻蚀剖面的影响；
Besides the above factors, the thickness of the metal crust and the insulated gas width between the crust and metal electrode will also affect the temperature distribution to some extent.
腔体厚度以及腔体和金属电极之间的绝缘气体层厚度的变化，对放电区的温度分布也会产生一定的影响。
The method and the course of verification of electrochemical electrode gas oxygen analyzer was briefly described.
简述电化学电极气体氧分析器的计量检定方法及过程。
ZnO thin films can be used to fabricate transparency electrode, piezoresistor, cell battery window, surface acoustic wave device, gas sensor and light-emitting diode etc.
它可以被用来制作透明电极、压敏电阻、太阳能电池窗口、表面声波器件、气体传感器、发光二极管等。
Match with the ignite electrode, detect electrode and gas solenoid valve to realize the burner auto. ignition and flame-out protection.
配合点火探测电极和燃气电磁阀用来完成烧嘴的自动点火和熄火保护。
These experimental results indicated that several factors such as gas velocity, electrode erosion, insulator envelope pollution and so on limited the repetitive operating capability of the switches.
通过实验我们发现气流流速、电极烧蚀、绝缘筒污染等因素制约了高能、大电荷量气体开关的重复工作性能。
The basic physical mechanisms of the electrode erosion process of high power gas switches were also studied.
研究了高功率气体火花开关电极烧蚀的基本物理过程。
The uncertainty of measurement for the standard of measurement of electrochemical electrode gas oxygen analyzer is less than 5%.
电化学电极气体氧分析器计量标准的扩展不确定度小于5%。
In addition, the feature of low electrode wear ratio of the electrical discharge machining in gas (dry EDM) is helpful to implement the tool electrode wear compensation in dry ED-Milling.
此外，气体介质中电火花加工工具电极损耗低的特点有利于实现气中电火花削加工工具电极损耗的补偿。
A new biosensor for L-alanine was designed, using cactus tissue as biocatalytic material and potentiometric carbon dioxide gas sensing electrode as basic electrode.
选择仙人球组织作为生物催化材料，同二氧化碳电极组合，研制成了L-丙氨酸生物组织传感器。
The cause that induces low catalytic activity of gas-sensitive electrode of electrochemical CO sensors and its improvement measures have been presented in this paper.
本文介绍了电化学co传感器气敏电极催化活性降低的原因及其改善措施。
Under the best operating mode condition, flue gas desulphurization efficiency can be up 80%, which proves that the three-dimensional electrode system has better desulphurization performance.
在最佳条件下，烟气脱硫效率能达到80%以上，说明三维电极体系有较好的脱硫性能。
Take gas diffusion electrode of zinc-air battery for example and add catalyst by layers, we studied the effect of changing catalyst layer location on the performance of gas diffusion electrode.
以锌空气电池气体扩散电极为研究对象，采用分层添加催化剂的方式研究了改变催化层位置对气体扩散电极放电性能的影响。
We determined L-lysine with chicken tissue based electrode, which employed chicken kidney slice as the source of L-lysine oxidase and an oxygen gas sensitive electrode as the base electrode.
本文首次使用鸡肾组织切片作为L -赖氨酸氧化酶的来源并与氧电极偶合制作成测定l -赖氨酸的组织电极。
Tool electrode ultrasonic vibration aided gas medium EDM technology was proposed and correspondingexperiment system was designed.
提出了工具电极超声振动辅助气体介质电火花加工方法。
In this paper, design principle on gun of automatic CO2 gas shielded welding with thick electrode is discussed.
论述了粗丝co2自动焊焊枪的设计原理，并对气流在焊炬中的流动情况和对熔池保护效果作了简要介绍。
The growth of gas bubbles on liquid-liquid interface is studied experimentally when gas forms through chemical reaction in sulphuric acid solution-zinc amalgam (or mercury electrode) system.
以硫酸水溶液-锌汞齐(汞电极)体系，实验研究了液-液界面上化学反应形成气体产物时气泡的生长规律。
This paper studies the flue gas desulphurization utilizing electrochemical oxidizing reaction in the three-dimensional electrode system.
试验研究了在三维电极体系下，利用电化学氧化反应进行烟气脱硫的技术。
This paper studies the flue gas desulphurization utilizing electrochemical oxidizing reaction in the three-dimensional electrode system.
试验研究了在三维电极体系下，利用电化学氧化反应进行烟气脱硫的技术。
应用推荐