The experimental results of bench scale research and the process scheme and design parameters of full scale facility to treat wastewater of dyestuff black G production by iron filings are reported.
本文介绍了废铁屑处理黑G染料废水的小试结果、工艺流程、工程设计参数和运行结果。
The design method of C/G composite tail boom of an unmanned air vehical is detailed in this paper. The result of strength test of the tail boom is also introduced.
本文较详细地介绍了小型无人机C／G复台材料尾撑杆的结构设计和工程计算方法，并给出了静力强度试验结果。
It's very important for some petroleum machinery(e. g. drilling rig and pumping unit) to carry on reliability analysis and design of the system of the narrow V type belt drive.
开展窄V带传动系统可靠性分析与设计对于提高钻机、抽油机等石油钻采机械的质量和效益具有重要意义。
Proven experience in OOP (e. g. C + +) design techniques and implementation.
必须具备基于C++的面向对象设计技术与经验。
With the commonly used serial bus as design basis, the kernel technologies, e. g., architecture and communication protocol of USB are analyzed and discussed.
本文以通用串行总线为设计基础，分析并讨论了USB的体系结构、通信协议等核心技术。
And I am also in charge of scheming, preparing and designing part of the products related to the activity, e. g. Booth design and layout, activity related manuals, clothing and marks designing.
并负责活动部分相关产品的策划准备以及设计工作，如：展台设计及布置，活动相关手册，服装，标志等设计工作。
The 3rd chapter discussion on functional programming: location, position of general functions, service module design, general layout design, and the current situation of P. G. Logistics Shunde Base.
第三章结合宝供顺德物流基地的实际，分别从项目选址、总体功能定位、服务功能模块设计、总平面规划四个方面对其功能规划进行探讨。
The separate bean tanks have an elegant, semi-transparent design and hold 650 g each.
两个精致的豆槽为磨砂透明设计，每个容量650克。
The design of engineering works requires the application of design theory from many fields (e. g., hydraulics, thermodynamics, nuclear physics).
工程设计的工作需要应用许多方面的设计理论(如水力学、热力学和核物理等)。
Previous interface information between CNC system and design systems is the ISO6983 standard, that is, using g, m code of the NC program.
以往数控系统与设计系统的接口信息采用的是ISO 6983标准，即采用G、M代码的数控程序。
The connotation and characteristic of constraint in collaborative design of machine tool are analyzed. Conformation model of constraint network is demonstrated using EXPRESS-G.
分析了机床产品协同设计中约束的内涵和特点，并用EXPRESS - G图描绘了约束网络的结构模型。
Building waterproof; total quality management; materials quality control; quality control of the design; construction quality control; G-TQM model.
建筑防水；全面质量管理；材料质量控制；设计质量控制；施工质量控制；g - TQM模式。
This kinetic model can be used in ballistic calculation of projectile with large angle of attack and also in the design of some smart munitions(e. g. target sensitivity projectile).
此动力学模型可用于弹丸大攻角飞行时的弹道计算及某些灵巧弹药（如末敏弹）的设计。
The traditional optical design is mostly done by manual modification to a certain degree, based on an initial model (e. g. patent).
传统的镜头光学设计多半是在一初始模型（如专利）的基础上作一定程度的人工修改。
G-protein Coupled Receptors (GPCRs) belong to one of the largest superfamilies of membrane proteins and are important targets for drug design.
蛋白偶联受体属于跨膜蛋白的大家族，在药物设计中起着很重要的作用。
Provide engineering and detail support in the design and application of panel system, e. g. shop drawings preparation, creation of cutting list, etc.
在合同签订后提供项目的设计和详图支持，如准备安装图纸、下料单等；
Molecule design, construction and high level expression in E. coli. of bimolecular G-CSF with longer half life and higher bioactivities than single molecular G-CSF.
研究目的是分子设计并构建较G-CSF单体分子具有半衰期更长、生物活性更高的新型重组人G-CSF/G-CSF双体分子（简称G-G），并在原核系统进行高效表达。
The design service life is based on the precondition of G-L Layer failure not occur, on the normal condition of balanced operation and routine maintenance.
设计使用寿命是指在正常平稳操作及正常维护条件下，基于搪瓷层没有产生失效的这一前提下所确定的容器使用寿命。
An assembly joint chain model is built up combining the assembly process information such as joint types, assembly sequences and design constraints e. g. ke...
所生成的尺寸链综合考虑了设计要求、装配工艺(顺序)、接头形式等因素，为设计方案的优化评价提供了误差分析手段。
NIU Y, DAI G, MU D, et al. Design and implementation of selfadaptation scheduling algorithm for open realtime system[J]. Computer Science, 2008,35(9):59-61.
（牛云，戴冠中， 慕德俊，等。基于反馈控制的开放式实时系统自适调度算法设计与实现[J]。计算机科学，2008，35（9）：59-61。
Initial design work should focus on components whose dimensions may affect the required designs for other components e. g. eye nuts and rigid strut connecting parts.
初步设计工作应集中在关键元件上，这些关键元件的尺寸将影响其他元件的设计，例如有眼螺母和刚性支柱连接部件。
In one design, a first (e. g., lower power) mode may be selected for the SPS receiver if the transmitter output power level is below a switch point.
在一种设计中，如果发射机输出功率电平低于切换点则可为SPS接收机选择第一(例如，低功率)模式。
Design products process flow, e. g. for winding, soldering, assembly.
设计产品生产工艺流程，例如：绕线，焊接，装配。
It does not provide drawing (CAD - Computer Aided Design) or G-code generation from the drawing (CAM - Computer Automated Manufacturing) functions.
它并不提供绘图(CAD-计算机辅助设计)或生成G代码(CAM -计算机辅助制造)的功能。
Series G vibratory screening machines for general applications are of enclosed, easy to clean design with 1 to 3 stacked screening decks.
系列的振动筛为通用型。封闭式，结构易于清洁，上下安装1-3层筛板。
Therefore the decryption quality of key design from IAFC is better than that of key designed from G-S and SR algorithms.
采用模糊控制迭代算法生成的密钥解密质量优于G - S算法和平滑修正法。
F&G based in Houston, Texas, USA, is the world leader in design of Mobile Offshore Drilling Units.
弗莱德•高德曼有限公司（F&G）位于美国德克萨斯州休斯顿市，在移动海洋钻井平台技术领域处于世界前沿。
Kernel-based Support Vector Machine (SVM) is widely used in many fields (e. g. image classification) for its good generalization, in which the key factor is to design effective kernel functions.
基于核方法的支持向量机(SVM)以其良好的推广性在图像分类等领域已经得到广泛应用，运用支持向量机的关键是设计有效的核函数。
Kernel-based Support Vector Machine (SVM) is widely used in many fields (e. g. image classification) for its good generalization, in which the key factor is to design effective kernel functions.
基于核方法的支持向量机(SVM)以其良好的推广性在图像分类等领域已经得到广泛应用，运用支持向量机的关键是设计有效的核函数。
应用推荐