• According to the fuzzy control rule and the input, the output connection request carries on the design to the software.

    根据模糊控制规则输入输出接口要求软件进行设计

    youdao

  • A fuzzy controller for capacitor voltage at DC side is designed by using fuzzy control rule with self-adjusting factors.

    采用带有自调整因子的模糊控制规则设计了有源滤波器直流电压的模糊控制器

    youdao

  • An adjustable fuzzy controller of which the fuzzy control rule table can be obtained by numerical calculation is designed.

    设计了一种在线可调整模糊控制器模糊控制规则可以解析的方法进行计算

    youdao

  • The control quantity was gained by looking up the table of fuzzy control rule, and formed PWM to control Wire-feeder device.

    控制通过查询模糊控制规则得到,并生成pwm控制送丝电机。

    youdao

  • In this method the self-adjusting integrator is adopted together with basic fuzzy control, according to the fuzzy control rule and practical experience.

    方法根据模糊控制规则实际工程经验,基本模糊控制的基础上增加了一个系数整定积分器。

    youdao

  • Then with an industrial furnace as controlled object, fuzzy control rule is obtained and fuzzy self adaptive control is realized by on line identifying fuzzy model.

    工业电炉控制对象通过在线辨识模糊模型获得模糊控制规则实现了模糊适应控制。

    youdao

  • A fuzzy controller of nuclear power plant pressurizer is researched and designed tentatively by defining fuzzy set, membership function and fuzzy control rule properly.

    通过合理地确定模糊隶属度函数模糊控制规则等,初步研究设计了核电站稳压器模糊控制器

    youdao

  • Methods Using the fuzzy control rule of accurate estimated intersection delay to control intersection signal lamp will reduce the time vehicle delay on intersection effectively.

    方法通过车辆交叉口延误时间估算,制订模糊控制规则控制交叉口的信号灯有效地减少车辆在交叉口延误时间。

    youdao

  • To improve the riding comfort and handling safety of a vehicle, an adjustable fuzzy control algorithm, whose fuzzy control rule table can be obtained with the numerical calculation.

    车辆操纵稳定性行驶平顺性为控制目标,提出一种在线可调整模糊控制算法模糊控制规则可以解析方法得到

    youdao

  • Based on the conventional direct torque control system, the adjusting of magnetic linkage and torque both adopt fuzzy control strategy and fuzzy control rule is generated in an analytic way.

    传统直接系统基础转矩的调节采用模糊控制策略,且模糊控制规则解析生成

    youdao

  • Some classical queue control algorithms can not insure the QoS for high level applications. Aiming at this problem, this paper proposes a queue control algorithm based on fuzzy control rule.

    一些经典网络队列控制算法无法确保高优先用户应用服务质量,针对问题提出基于模糊控制规则的队列控制方法

    youdao

  • Fuzzy Neural Network combined with conventional PD controller is used for the kinematics control and a fuzzy rule extraction method is put forward.

    采用模糊神经网络结合常规PD控制器方法来进行机器人的运动控制,提出了提取模糊规则的方法。

    youdao

  • The fuzzy control based on the control rule described by the fuzzy language, has been successfully used in the industry control process and has an extensive foreground of application.

    基于模糊语言控制规则描述模糊控制,成功地用于工业过程控制具有广泛应用前景

    youdao

  • The fuzzy control which is based on the control rule described by the fuzzy language, has been successfully used in the industry control process and has the extensive foreground of application.

    基于模糊语言控制规则描述模糊控制,成功地用于工业过程控制具有广泛应用前景

    youdao

  • Therefore, the automatic determination of the fuzzy rule and in-process adaptation of membership function are required for the advanced welding process control.

    因此模糊规则自动生成隶属度函数在线调整对于现代焊接过程控制来说迫切需要的。

    youdao

  • A research shows that switch time fuzzy control not only improves control accuracy of temperature, but also simplifies control rule.

    研究表明开关时间模糊控制不仅提高了温度控制精度而且简化了控制规则

    youdao

  • The rule of fuzzy control and output expression as well as the practical results are given.

    给出了模糊控制规则输出表达式以及它的应用实践效果

    youdao

  • On Basis of on fuzzy model that has been set up, the design of fuzzy controller and the rule of control have been finished.

    建立控对象模糊模型模糊模型的基础上完成了模糊控制器设计、模糊控制规则的建立。

    youdao

  • We adopt a rule of three steps fuzzy control system applying to temperature control of vacuum sintering furnace.

    采用了一种三规则模糊控制策略,真空烧结炉温度进行控制。

    youdao

  • This paper adopts a fuzzy rule self-adjust control method to the need of industrial constant temperature control.

    论文提出了一种控制规则调整模糊控制器设计方案

    youdao

  • Taking the thermodynamic system of radiator testing stand as a controlled object, studies the fuzzy control process of rule self-tuning for supply air temperature in air circulation systems.

    提出了一种模糊控制规则实时校正算法,并散热器实验热工系统为被控对象研究风循环系统送风温度规则自校正模糊控制过程

    youdao

  • Parameters selection in fuzzy PID control rule is analyzed and a discussion for the control results is carried out.

    对模糊pid控制规律参数选择进行了分析,并控制结果进行了讨论

    youdao

  • Control rule self-seeking-optimization fuzzy algorithm is used in the system.

    算法采用控制规则模糊算法。

    youdao

  • At last, control performance of optimized control rule and membership function are compared with that of PID and traditional fuzzy control system.

    并利用寻优获得隶属函数控制规则PID算法、常规模糊控制算法控制同一被控对象响应结果进行了对比分析。

    youdao

  • The obstacle avoidance is detailed based on ultrasonic sensors rule of fuzzy control and courses of defuzzification, and the experimental result is produced.

    介绍超声障系统模糊控制规则模糊化,给出了实验结果

    youdao

  • The composition of the fuzzy controller and the control method of the fuzzy, fuzzy rule and reasoning, and back fuzzy were given.

    给出了模糊滑模控制器构成以及模糊化、模糊规则推理模糊化处理的方法

    youdao

  • In the coding process, scale factor, fuzzy-control rule and Subordination function are integrated to code in order to complete integral optimizing.

    编码过程比例因子模糊控制规则隶属度函数进行了统一编码,实现了多个因数的整体寻优。

    youdao

  • A rule-based hammerer model was proposed on the basis of fuzzy control theory.

    基于模糊控制理论建立了锻工模型

    youdao

  • This paper presents an adaptive control based on rule - adaptive fuzzy control according to the electrohydraulic servosystem 's nonlinear characteristic in simulator.

    本文针对伺服系统的非线性特点,提出了一种基于模糊补偿的自适应控制方法。

    youdao

  • This paper presents an adaptive control based on rule - adaptive fuzzy control according to the electrohydraulic servosystem 's nonlinear characteristic in simulator.

    本文针对伺服系统的非线性特点,提出了一种基于模糊补偿的自适应控制方法。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定