Therefore, the temperature and heat transfer regimes over the sections of the tubes adjacent to the active furnace zone greatly depend on the heat transfer dynamics in the active furnace zone.
因此，与起作用的炉区相邻的管段上的温度和热传递状况极大地依赖于起作用的炉区中的热传递动力学。
The DR furnace is a steel vessel with an internal refractory lining in the reducing zone.
直接还原炉是一种钢制容器，在其还原带内具有耐火材料做的炉衬。
The results showed that there was the recirculation zone in the furnace due to the interaction of the jets.
计算结果表明，由于射流之间的相互作用，在炉膛后面存在回流区。
The non-oxidizing zone is consisted of entry sealed room, waste gas preheating zone, direct heating zone, and furnace nozzle and flue gas exhausting system.
无氧化段由入口密封室，废气预热区，直接加热区，炉喉，废气排放系统组成。
The feed materials are fed in a dry state to the conversion zone in order to prevent erosion of the furnace walls.
饲料喂养材料在干燥状态的转换区，以防止炉墙侵蚀。
The ECT system used to imaging the distribution of sintering ore and cokes in lump zone of a blast furnace is studied including the sensor design, measuring circuit design and system software design.
介绍了用于实现高炉块状区物料分布可视化监测的E CT系统，包括系统的硬件检测电路构成、传感器设计及软件设计。
The key to control FeSi furnace condition is to form SiC decomposi ti on zone.
文章认为，控制好硅铁炉况的核心是要获取尽量大的碳化硅分解区。
Experimental results indicated that oxidation of methane and carbon occurred simultaneously in the lower zone close to the furnace bottom and O2 was used up.
实验结果表明，在合成气制备炉下部主要发生甲烷和碳的氧化反应，氧气完全消耗。
Their main usage are for metallurgical industry for example, ferrous smelting furnace; Besides, they are also used in the sintering zone of cement rotary kiln and regenerator of glass furnace, etc.
产品主要用于冶金行业平炉炉顶、电炉炉顶、精炼炉及各种有色金属冶炼炉，此外还用在水泥回转窑烧成带和玻璃窑的蓄热室等部位。
On the principle of similarity, the early slag flow in dropping zone is investigated hydraulically with an experimental set-up locally analogues to a blast furnace.
根据相似原理，对高炉滴落带初渣流动进行了区域模拟的实验研究。
This paper discusses the method of Glass Furnace Forehearth Zone Temperatures and presents a direct digital computer system and hardware software.
本文讨论玻璃熔窑成型区温度控制方法，提出了计算机直接数字控制系统，给出了该系统的硬件和软件。
The advantage and shortage of the flash furnace with slag pooring zone or set a separate electric slag pooring furnace are compared, it shows the latter is more reasonable.
对带贫化区的闪速炉与单独设置贫化电炉的闪速炉的优缺点进行了比较，确认单独设置贫化电炉的闪速炉方案较为合理。
Applying zone method, a two-dimensional mathematical model of oil fired reheating furnace has been set up by the author.
本文应用区域法原理，建立了一种加热炉二维数学模型。
Results show that the ratio of hardness of matrix to that of interface transition zone decreases with the increase of cement replacement level by blast furnace slag;
试验结果显示：随矿渣取代水泥质量分数的增加，基体与界面过渡区之间压痕硬度的差异减少；
An optimizing productivity model was developed based on the aerodynamics condition in the lower zone of a blast furnace.
从高炉下部气体动力学条件出发，建立了反映高炉重要操作参数和最大产量之间对应关系的产量优化模型。
The car furnace supporting automatic temperature control cabinet, respectively, multi -zone automatic temperature control and heating furnace operation control on the door.
该台车炉配套自动控温柜，分别对多区加热进行自动控温和对炉门炉体运行控制。
The thermal transfer model inside the furnace is established, the thermal radiation transfer solved by use of the presolving zone method, a new "explicit" iteration method presented, and numerical…
建立了描述直通式辊底炉炉内换热的长炉模型，应用预解区域法解算其辐射换热，提出了新的“显式”迭代法，对直通式辊底炉的设计和操作参数的影响进行了数值分析。
To improve the temperature uniformity, multi -zone heating furnace and heating elements are arranged two door.
为提高炉温均匀性，电炉采用多区加热，并在两个炉门上布置加热元件。
Describes the layout of heating sources in a moderate-temperature blackbody furnace we developed with big opening and 3-zone heating.
报道了所研制的大开孔三段加热中温黑体炉腔体热源布置原则。
Describes the layout of heating sources in a moderate-temperature blackbody furnace we developed with big opening and 3-zone heating.
报道了所研制的大开孔三段加热中温黑体炉腔体热源布置原则。
应用推荐