The paper introduces the nickel smelting blast furnace control system.
介绍了某镍冶炼厂鼓风炉控制系统。
Introduces the modification plan of HTM furnace control system based on PLC.
介绍了基于PLC技术的热媒炉控制系统的改造方案。
This paper introduces hydraulic jet-pipe control technique by combining blast furnace control.
结合高炉控制，介绍了液压射流管控制技术。
Hoist the main blast furnace control system is the guarantee for the normal production of one of the key equipment.
主卷扬控制系统是保证高炉正常连续生产的关键设备之一。
This paper introduces the required basic functions of intermittent gas making furnace control program and points to be alert.
介绍制作较完善的间歇造气炉控制程序应具有的基本功能，制作中某些应注意的细节。
Abstract: the traditional heating furnace control system is based on some model, it is difficult to guarantee the demand of heating process.
摘要：传统的加热炉控制系统大多建立在一定的模型基础上，难以保证加热工艺要求。
It is necessary for re-heating furnace control model to adapt and optimize in order to satisfy the requirement of hot strip rolling production.
为了满足热轧生产的需求，加热炉模型控制需要不断的适应和优化。
A sort of relatively novel electric furnace control is introduced. The circuit is terse, the work is trust-worthy and the control is of high precision.
介绍一种较新颖的电炉温控系统，电路简洁，工作可靠，控温精度高。
Main problems of previous HTM furnace control system in polyester plant are simply analysed. It is given that hardware configuration and software design of modification plan.
简要分析了聚酯装置热媒炉原控制系统存在的问题，给出了改造方案的硬件配置和软件设计内容。
For HTAC (Hight Temperature Air combustion) technology, pressure control and pressure fluctuation during combustion switchover are very important to the furnace reliability and stability.
蓄热式燃烧技术中，炉压控制和换向时造成的炉压波动是一个非常重要的问题。
This paper is mainly discuss the design about PLC temperature control system of box heat-treatment furnace.
本文主要讨论了以可编程控制器为核心的箱式热处理炉温度控制系统的设计。
The temperature system is a class of difficult object, In this paper, an method of control based on the experiment rule for the Si Mo furnace is developed.
温度系统是一类较难控制的对象，例如文中所述硅钼炉的温度控制问题，作者采用经验规则控制方法解决了这类对象的有效控制问题。
The inertial object with uncertain coefficient is a class of difficult object, in this paper, an method of control based on the experiment rule for the Si-Mo Furnace is developed.
变惯性系数惯性对象是一类较难控制的对象，例如文中所述硅钼炉的温度控制问题，作者采用经验规则控制方法解决了这类对象的有效控制问题。
To introduce the technology reform of oil burning open fire furnace. The heat treatment control principle of the open fire furnace and its adopting measures are introduced emphatically.
介绍燃油明火加热炉的技术改造，着重介绍明火加热炉热工控制的原理以及采取的措施。
A modified fuzzy controller structure which has faster response and higher accuracy is used to control the temperature and the pressure of the furnace.
在炉温和炉压控制回路中，采用了经过改进的模糊控制器，得到了较快的响应特性和较精确的温度、压力控制效果。
The intelligent PID control makes the practical furnace temperature curve well meet with standard ISO834.
采用智能PID控制则使炉膛的实际升温曲线符合ISO 834国际标准升温要求。
Since the property requirements are so special, tool steel are usually melted in electric furnace using careful metallurgical quality control.
由于需要的性质是如此特别，工具钢通常使用冶金质量控制的方法在电炉中熔化。
It is concluded that to reduce temperature from furnace, shorten time in furnace and control atmosphere in furnace are the key points.
得出结论：降低出炉温度、缩短在炉时间及控制了炉内气氛是关键。
We develop a fringing state space model used in the continuous annealing furnace computer optimization control.
本文开发了一个用于连续退火炉计算机优化控制的离散状态空间模型。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
The furnace flame detection system has wide application foreground. It is a valuable researching direction on combining image processing and combustion control.
全炉膛火焰检测系统具有广阔的应用前景，图像检测和燃烧控制相结合是一个有价值的研究方向。
The zinc smelting furnace with automatic feeding system has functions of automatic, timing and quantitative control on its feeding process.
锌熔炼炉自动投料系统可实现对熔炼炉投料的自动、定时、定量控制。
The reheating furnace process computer system goals are mainly dynamic production process control, process operation records tracking, and production process optimization with metallurgy model.
再加热炉过程控制计算机系统的主要目的是实现生产动态过程控制，跟踪操作记录，同时通过冶金模型进行生产过程优化。
The multi-firing mode capability allows for use of a single control amplifier and for common spare parts in multi-furnace facilities.
多模式功能允许发射放大器使用一个单一的控制和多炉共同备件设施。
This paper analyzes the mathematical model of a resistance heating furnace, showing that a normal controller is unable to reach a high control accuracy.
本文分析了电阻加热炉的数学模型，说明了常规控制器不能达到高控制精度的原因。
This text introduced a kind of with digital signal processor DSP for core of electric resistance furnace temperature control system.
本文介绍了一种以数字信号处理器DSP为核心的电阻炉温度控制系统。
This paper was designed to 8098 microcontroller as the core gas furnace temperature control system, it can achieve data collection, data and alarm pretreatment.
本文设计了以8098单片机为核心的煤气加热炉温度控制系统，它可实现数据采集、数据显示以及报警预处理。
This paper was designed to 8098 microcontroller as the core gas furnace temperature control system, it can achieve data collection, data and alarm pretreatment.
本文设计了以8098单片机为核心的煤气加热炉温度控制系统，它可实现数据采集、数据显示以及报警预处理。
应用推荐